Table of Contents
Advertisement
STARTING AND DRIVING
Turning on the system
1. Shift the four wheel drive control lever to the "L"
position.
The system will not operate if the four wheel drive control lever
is in the "H" position.
2. In order to make full use of the engine brake, putting the
transmission in "L" or "2" is recommended.
The system will operate even if the transmission selector lever
is in "D", "4", "3" or "N". However, when it is in "L" or "2" the
engine brake can also be utilized enabling the system to
operate more effectively.
3. Push the "DAC" switch to turn the system on. The
downhill assist control system indicator light on the
instrument panel will come on.
378
If the downhill assist control system indicator light flashes, the
transmission selector lever may be in "N" or four wheel drive
control lever may be in the "H" position.
If the indicator light does not come on when the switch is
pushed, contact your Lexus dealer.
" Slip indicator light
With the vehicle traveling at a speed of 25 km/h (15 mph) or
less, release your foot from the accelerator or brake pedal to
activate the system. The vehicle will descend the hill at a low
speed. While the system is operating, the slip indicator light on
the instrument panel will flash and the stop lights and high
mounted stoplight will be lit.
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
