CAUTION
Never get under the vehicle when the vehicle
is supported by the jack alone.
7. Remove the wheel nuts and remove the flat tire.
Lift the flat tire straight off and put it aside.
Roll the spare wheel into position and align the holes
in the wheel with the bolts. Then lift up the wheel
and get at least the top bolt started through its hole.
Wiggle the tire and press it back over the other bolts.
Before putting on the wheel, remove any corrosion
on the mounting surfaces with a wire brush or such.
Installation of wheels without good metal to metal
contact at the mounting surface can cause wheel nuts
to loosen and eventually cause a wheel to come off
while driving.
I n f o r ma t i o n P r o v i d e d b y :
IN CASE OF AN EMERGENCY
443