INTERIOR EQUIPMENT
3. Simultaneously press and hold the hand held garage
transmitter button along with the selected HomeLink
Do not release the buttons until step 4 has been completed.
4. When the indicator light on the HomeLink
slow to a rapid flash after 20 seconds, you can release both
buttons.
86
5. Test the operation of the HomeLink
R
button.
programmed button. If programming a garage door opener,
check to see if the garage door opens and closes.
If the garage door does not operate, identify if your garage
R
changes from a
transmitter is of the "Rolling Code" type. Press and hold the
programmed HomeLink
rolling code feature if the indicator light (on the HomeLink
flashes rapidly and then remains lit after 2 seconds. If your
garage transmitter is the "Rolling Code" type, proceed to the
heading "Programming a rolling code system".
6. Repeat steps 2 through 5 for each remaining HomeLink
button to program another device.
I n f o r ma t i o n P r o v i d e d b y :
R
by pressing the newly
R
button. The garage door has the
R
)
R