Table of Contents
Advertisement
AUDIO
The display can show up to 12 letters at once. If the CD title
or music title is longer than 12 letters, hold down the button for
longer than 1 second. The letters after the 12th one are shown.
However, 24 letters at maximum can be shown on the display.
When you push this button for longer than 1 second or play no
operation for about 6 seconds with the letters after the 13th one
on the display, the display returns and shows the first 12 letters.
Even if the CD title or music title is longer than 24 letters, the
display can show up to 24 letters.
(i) If the player malfunctions
If the player or another unit equipped with the player
malfunctions, your audio system will display following error
messages.
If "WAIT" appears on the display: It indicates that the inside
of the player unit may be too hot due to the very high ambient
temperature. Remove the CD from the player and allow the
player to cool down.
If "ERROR 1" appears on the display: It indicates that the CD
is dirty, damaged, or it was inserted up side down. Clean the
CD or insert it correctly.
If "ERROR 3" or "ERROR 4" appears on the display: It
indicates there is a trouble inside the system. Eject the CD.
If the malfunction is not rectified: Take your vehicle to your
Lexus dealer.
250
Audio remote controls (steering switches)
The switches are installed on the left side of the steering wheel.
"MODE" switch: Use this switch to turn on or off the audio
system, or change the audio mode.
D To turn on the system, push the switch briefly. To turn off the
system, push and hold the switch until you hear a beep.
D To change the audio mode, turn on the system and push the
switch briefly. If a tape or CD is not inserted, the "TAPE" or
"CD" mode is skipped.
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
