How To Initialize The Tire Pressure Warning System - Toyota RAV 4 2015 Service Manual

554
6-3. Do-it-yourself maintenance

How to initialize the tire pressure warning system

■
Park the vehicle in a safe place and turn the engine switch to the
1
"LOCK" position (vehicles without a smart key system) or off
(vehicles with a smart key system).
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire inflation
2
pressure level. (P. 669)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
Turn the engine switch to the "ON" position (vehicles without a
3
smart key system) or IGNITION ON mode (vehicles with a smart
key system).
Press and hold the tire pres-
4
sure warning reset switch
until the tire pressure warn-
ing light blinks slowly 3 times.
Vehicles without a smart key system: Wait for a few minutes with
5
the engine switch in the "ON" position and then turn the engine
switch to the "ACC" or "LOCK" position.
Vehicles with a smart key system: Wait for a few minutes with the
engine switch in IGNITION ON mode and then turn the engine
switch off.
RAV4_OM_OM42A78U_(U)
I n f o r ma t i o n P r o v i d e d b y :