How To Initialize The Tire Pressure Warning System - Toyota COROLLA iM 2017 Service Manual

252
6-3. Do-it-yourself maintenance
■

How to initialize the tire pressure warning system

1
Park the vehicle in a safe place and turn the engine switch off.
Initialization cannot be performed while the vehicle is moving.
2
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. (→P. 331)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
3
Turn the engine switch to the "ON" position.
4
Open the glove box. Press
and hold the tire pressure
warning reset switch until the
tire pressure warning light
blinks slowly 3 times.
5
Wait for a few minutes with the engine switch in the "ON" position
and then turn the engine switch to the "ACC" or "LOCK" position.
COROLLA iM_U (OM12K64U)