Switching the door unlock function
■
It is possible to set which doors the entry function unlocks using the wireless
remote control.
Turn the engine switch off.
1
When the indicator light on the key surface is not on, press and hold
2
or
.
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step
Unlocking function
Holding the driver's door handle
unlocks only the driver's door.
Holding a passenger's door handle
unlocks all the doors.
Holding a door handle unlocks all
the doors.
RAV4_OM_OM42A78U_(U)
3-2. Opening, closing and locking the doors
for approximately 5 seconds while pressing and holding
.)
2
Exterior: Beeps 3 times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
I n f o r ma t i o n P r o v i d e d b y :
105
,
Beep
3