Battery-Saving Function; Electronic Key Battery-Saving Function - Toyota RAV 4 2015 Service Manual

106
3-2. Opening, closing and locking the doors

Battery-saving function

■
The battery-saving function will be activated in order to prevent the electronic
key battery and the vehicle battery from being discharged while the vehicle is
not in operation for a long time.
● In the following situations, the smart key system may take some time to
unlock the doors.
• The electronic key has been left in an area of approximately 6 ft. (2 m) of
the outside of the vehicle for 10 minutes or longer.
• The smart key system has not been used for 5 days or longer.
If the smart key system has not been used for 14 days or longer, the doors
●
cannot be unlocked at any doors except the driver's door. In this case, take
hold of the driver's door handle, or use the wireless remote control or the
mechanical key, to unlock the doors.

Electronic Key Battery-Saving Function

■
When battery-saving mode is set, battery depletion is minimized by stopping
the electronic key from receiving radio waves.
Press twice while pressing and
holding . Confirm that the electronic
key indicator flashes 4 times.
While the battery-saving mode is set, the
smart key system cannot be used. To
cancel the function, press any of the elec-
tronic key buttons.
RAV4_OM_OM42A78U_(U)
I n f o r ma t i o n P r o v i d e d b y :