Page 1: Table Of Contents
TABLE OF CONTENTS Index 1-6. Theft deterrent system Before driving Engine immobilizer system ......106 Alarm ........109 1-1. Key information Theft prevention labels Keys ........30 (for U. S. A.) ..... 111 1-2. Opening, closing and 1-7. Safety information locking the doors Correct driving posture ..
Page 2 2-2. Instrument cluster 2-5. Driving information Gauges and meters .... 182 Off-road precautions... 262 Indicators and warning Cargo and luggage..... 267 lights ......... 189 Vehicle load limits....273 Accessory meter ....194 Winter driving tips....275 Trailer towing...... 280 2-3. Operating the lights and Dinghy towing.....
Page 3 TABLE OF CONTENTS Index ® 3-3. Using the Bluetooth 3-6. Using the storage features audio system List of storage features ..416 ® • Glove box ......417 Bluetooth audio system..364 • Console box ..... 418 ® Using the Bluetooth •...
Page 4 Maintenance and care When trouble arises 4-1. Maintenance and care 5-1. Essential information Cleaning and protecting Emergency flashers.... 554 the vehicle exterior.... 478 If your vehicle needs to Cleaning and protecting be towed......555 the vehicle interior..... 481 If you think something is wrong .......
Page 5 TABLE OF CONTENTS Index Vehicle specifications 6-1. Specifications Maintenance data (fuel, oil level, etc.) ... 610 Fuel information ....623 Tire information ....626 6-2. Customization Customizable features ..638 6-3. Initialization Items to initialize....644 For owners Reporting safety defects for U.S.
Page 6 I n f o r ma t i o n P r o v i d e d b y :...
Page 7 4RUNNER CUSTOMER EXPERIENCE CENTER 2 0 1 0 1-800-331-4331 QUICK REFERENCE GUIDE Printed in U.S.A. 9/09 00505-QRG10-4RUN 08-TCS-03067 I n f o r ma t i o n P r o v i d e d b y :...
Page 8 Spare tire & tools of the vehicle’s capabilities and limitations. Tool location Your dealership and the entire staff of Toyota Motor Sales, U.S.A., Inc. wish you many years of satisfied driving in your Tool bag new 4Runner.
Page 9 Seat belts Seat belts-Shoulder belt anchor Spare tire & tools Tire Pressure Monitoring (warning) System Visit your Toyota dealer for information on customizing this feature. Programmable by customer. Refer to the Owner’s Manual for instructions and more information. ® HomeLink is a registered trademark of Johnson Controls, Inc.
Page 10 OVERVIEW Instrument panel Steering wheel controls Manual Air Without Smart Key system With Smart Key system Center console box Power rearview mirror controls Instrument panel light control Intuitive parking assist switch and indicator Tilt and telescopic steering lock release “RSCA OFF” (Roll Sensing of Curtain shield Airbags “OFF”) switch 120V AC Power outlet ON/OFF switch Windshield wiper de-icer switch Headlight, turn signal and front fog light...
Page 11 Conditioning 2WD models Automatic Air Conditioning Part-time 4WD models Full-time 4WD models USB adapter AUX adapter Four-wheel drive selector Hood release Steering wheel audio controls Voice command button Telephone switches Ignition switch (standard key)/“ENGINE START STOP” button (Smart Key) Party mode switch Cruise control Seat heater switch 120V AC Power outlet...
Page 12 OVERVIEW Instrument cluster Non-Optitron type meters Optitron type meters Tachometer Speedometer Display change button Engine coolant temperature Fuel gauge Eco driving indicator zone display Odometer, trip meter and average fuel consumption display Shift position and shift range indicators Voltmeter Indicator symbols Brake system warning Driver/Front passenger seat belt reminder (alarm will sound if speed is over 12 mph)
Page 13 Front fog light indicator Power steering system warning Roll Sensing of Curtain shield Airbag OFF indicator Multi-terrain select Engine immobilizer/Theft deterrent system indicator Smart Key system warning Unengaged Park warning light Crawl Control indicator Low speed four-wheel drive indicator Center differential lock indicator Vehicle Stability Control OFF indicator Four-wheel drive indicator Slip indicator...
Page 14 OVERVIEW Fuel tank door and cap Turn Pull NOTE: Tighten until one click is heard. If the cap is not properly sealed, Check Engine “ ” indicator may illuminate. Keyless entry Locking Without Smart Key system With Smart Key system Push Unlocking Without Smart Key system...
Page 15 Smart Key system (if equipped) Start function Green indicator ON Depress Push brake pedal Carrying NOTE: Gear shift lever must be in Park and brake pedal depressed. Power (without starting engine) Without depressing the brake pedal, pressing the “ENGINE START STOP” switch will change the operation mode in succession from: ACCESSORY Accessories such as the radio will operate.
Page 16 OVERVIEW Hood release Pull up latch and raise hood Pull Engine maintenance Windshield and back window washer fluid tank Power steering fluid reservoir Engine oil level dipstick Engine coolant reservoir Engine oil filler cap NOTE: Regularly scheduled maintenance, including oil changes, will help extend the life of your vehicle and maintain performance.
Page 17 FEATURES/OPERATIONS Auto lock functions Automatic door locks can be programmed to operate in four different modes, or turned OFF. -Doors lock when shifting from Park. -Doors lock when the vehicle speed is approximately 12 mph or higher. -Doors unlock when shifting into Park. -Doors unlock when the driver’s door is opened within 10 seconds after turning the “ENGINE START STOP”...
Page 18 FEATURES/OPERATIONS Four-wheel drive (if equipped) Part-time four-wheel drive models High speed (2WD) High speed (4WD) Turn to “H4” with speed below 50 mph. Neutral Low speed (4WD) Shift to “N” position, then push and turn to “L4.” Full-time four-wheel drive models High speed High speed (center differential locked)
Page 19 Seat adjustments-Front Manual seat Power seat Seat position (forward/backward) Height crank (driver side only) Seatback angle Lumbar support (driver side only) Driver seat: seat position, cushion angle and height Passenger seat: seat position (forward/backward) Seatback angle Lumbar support (driver side only) Seat adjustments-Second row seats Vehicles with third row seats Vehicles without third row seats...
Page 20 FEATURES/OPERATIONS Seats-Folding down second row seats Without third row seats (2) Lower (1) Push (3) Stow (5) Push down (6) Fold down (4) Pull up With third row seats (2) Lower (1) Push (3) Stow (4) Pull up (5) Fold down I n f o r ma t i o n P r o v i d e d b y :...
Page 21 Seats-Stowing third row seats (if equipped) From inside (2) Pull up (4) Pull up (1) Stow (5) Fold down (3) Pull up From outside (1) Stow (3) Pull up (2) Pull up (4) Fold down Seats-Returning third row seats (if equipped) (3) Raise (2) Pull (1) Raise...
Page 22 FEATURES/OPERATIONS Clock H- Hour set M- Minute set Windows Driver side Window lock switch Down Automatic operation Push the switch completely down or pull it completely up and release to fully open or close. To stop window midway, lightly push the switch in the opposite direction. Window lock switch Deactivates all passenger windows.
Page 23 Window-Back window Operating from inside Operating from outside With Smart Key system Close Open Close Open Without Smart Key system Window lock switch Open Close Turn and hold Light control-Instrument panel Brightness control VSC OFF button VSC OFF The VSC OFF button is used to switch between modes related to the TRAC, VSC and Auto LSD (2WD) functions.
Page 24 FEATURES/OPERATIONS Lights & turn signals Headlights Type A Type B Headlights Headlights Parking lights DRL ON Parking lights DRL OFF Auto DRL OFF Low beam High beam flasher High beam -Automatic light cut off system Will automatically turn lights off after a delay of 30 seconds, or the lock switch on remote may be pushed after locking.
Page 25 Windshield wipers & washers Front Single wipe Adjust frequency* Interval wipe Slow Fast Pull to wash and wipe * Intermittent windshield wiper frequency adjustment Rotate to increase/decrease wipe frequency. Rear Wash and wipe Wipe Interval wipe Wash and wipe NOTE: Rear wiper and washer operate only when back window is fully closed.
Page 26 FEATURES/OPERATIONS Seat heaters (if equipped) Front passenger’s seat Driver’s seat Air Conditioning/Heating Automatic Air Conditioning Temperature selector (driver side) Fan speed Air Conditioning ON/OFF Fresh or recirculated cabin air Temperature selector (front passenger side) “DUAL” button Indicator ON: Separate temperature settings for driver and passenger.
Page 27 Manual Air Conditioning Fan speed Fresh or recirculated cabin air Airflow vent In “ ” mode, use fresh air (“ ” indicator OFF) to reduce window fogging. “ ” mode uses fresh air only. Rear window and outside rear view mirror defoggers Select for maximum cooling.
Page 28 FEATURES/OPERATIONS Audio Type 1 Preset buttons - functions in other modes indicated above number Eject CD Push to adjust Push to turn tone & balance ON/OFF View genre/ Seek station/ Push to skip CD track select up/down folder Station/CD View radio/CD AM/Satellite Mode track scan...
Page 29 Steering wheel controls (if equipped) Volume control “ ” Use to search within the selected audio medium (radio, CD, iPod, etc.). “MODE” Push to turn audio ON and select an audio mode. Push and hold to turn audio system OFF. Party mode switch Party mode increases audio amplification in back door speakers, optimizing audio performance outside vehicle when rear hatch is open.
Page 30 Refer to “Using the hands-free phone system (for cellular phone),” Section 3-4 in the Owner’s Manual for more details, or go to Toyota.com and enter “Bluetooth” in the keyword search. Power outlets-120V AC (if equipped)
Page 31 Bluetooth audio (if equipped) ® Audio unit Microphone Steering wheel audio switches Volume Selects a track and album Turns the power on, selects an audio source ® The Bluetooth audio system enables you to enjoy music played on a portable digital audio player from the vehicle speaker via wireless communication.
Page 32 Correctly adjusting tire inflation will turn off the light after a few minutes. If the light does not turn off, have the system checked by your Toyota dealer. Refer to the Owner’s Manual for more details.
Page 33 Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehi- cles are currently available on the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 34 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 35 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 36 This is a warning against something which, if ignored, may cause damage to the vehicle or its equipment. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 37 I n f o r ma t i o n P r o v i d e d b y :...
Page 38: Before Driving
TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column. When driving Driving, stopping and safe-driving information. Interior Air conditioning and audio systems, as well as other in- features terior features for a comfortable driving experience. Maintenance Cleaning and protecting your vehicle, performing do-it- and care...
Page 39 Pictorial index Exterior Windshield wipers P. 205 Headlights (low beam) P. 198 ∗ Moon roof P. 98 Hood P. 494 Outside rear view mirrors P. 89 Headlights (high beam) P. 198 Parking lights and front side marker lights P. 198 ∗...
Page 40 Stop/tail and rear side marker lights P. 198 Rear window defogger P. 310 Rear window wiper P. 207 Side doors P. 51 Fuel filler door P. 102 License plate lights P. 198 Tires ●Rotation P. 514 Back door P. 56 ●Replacement P.
Page 41 Pictorial index Interior Seat belts P. 79 Console box P. 418 Tissue pocket P. 420 Head restraints P. 76 Pen holder P. 421 Power window switches P. 91 SRS driver airbag P. 114 ∗ SRS knee airbags Cup holders P. 423 P.
Page 42 SRS curtain shield airbags P. 114 Personal lights P. 414 Interior light P. 414 Interior light P. 414 Sun visors P. 429 CTHPIAS006 Garage door opener switches P. 462 ∗ “SOS” button P. 469 ∗ Moon roof switches P. 98 ∗...
Page 43 Pictorial index Interior Door lock switch P. 52 Power window switches P. 91 Inside door lock button P. 52 CTHPIAS007 Window lock switch P. 91 I n f o r ma t i o n P r o v i d e d b y :...
Page 44 ∗ Cup holders Seat heater switches P. 423 P. 446 Coin holder P. 419 CTHPIAS087 ∗ Power back window Power outlets P. 439 switch P. 94 ∗ : If equipped I n f o r ma t i o n P r o v i d e d b y :...
Page 45: Instrument Panel
Pictorial index Instrument panel Headlight switch P. 198 Turn signal lever P. 179 ∗ Fog light switch P. 204 Gauges and meters P. 182 Windshield wiper and washer switch P. 205 Rear window wiper and washer switch P. 207 Accessory meter P.
Page 46 Vehicles with a manual air conditioning system Rear window and outside rear Front passenger’s seat belt view mirror defoggers P. 310 reminder light P. 567 Intuitive parking assist ∗ indicator light P. 213 Security indicator Front passenger “AIR BAG ON” and CTHPIAS060 light P.
Page 47 Pictorial index Instrument panel Vehicles without a smart key system Engine (ignition) switch P. 164 ∗ Telephone switch P. 385 Audio remote control ∗ ∗ switches P. 361 Talk switch P. 385 CTHPIAS079 ∗ Horn P. 181 Cruise control switch Party mode switch P.
Page 48 Outside rear view mirror switches P. 89 Instrument panel light control dial P. 187 ∗ Intuitive parking assist switch P. 213 CTHPIAS062 ∗ Windshield wiper de-icer switch Tilt and telescopic steering lock release lever P. 312 P. 86 “RSCA OFF” switch P.
Page 49 Pictorial index Instrument panel Standard type transmission Power outlets P. 436 AUX adapter P. 360 Shift lock override button P. 592 Cup holders P. 423 CTHPIAS084 Multi-mode type transmission (2WD) Power outlets P. 436 AUX adapter P. 360 Shift lock override button P.
Page 50 Multi-mode type transmission (part-time 4WD) Power outlets P. 436 AUX adapter Front-wheel drive control lever P. 360 P. 223 Shift lock override button P. 592 Cup holders P. 423 CTHPIAS035 Multi-mode type transmission (full-time 4WD) Power outlets P. 436 AUX adapter Four-wheel drive control switch P.
Page 51: Luggage Compartment
Pictorial index Luggage compartment Luggage compartment lights P. 57 Child restraint anchor brackets P. 139 CTHPIAS064 ∗ Slide deck P. 459 ∗ Storage compartment P. 458 I n f o r ma t i o n P r o v i d e d b y :...
Page 52 Vehicles without third row seats Tool bag P. 578 Cargo net hooks Jack P. 578 P. 457 Grocery bag hooks P. 459 Cargo hooks P. 456 Cargo net hooks P. 457 CTHPIAS066 ∗ Grocery bag hooks P. 459 Vehicles with third row seats Tool bag P.
Page 53 Pictorial index Luggage compartment Vehicles without third row seats Power outlets P. 436 Cargo net hooks P. 457 Grocery bag hooks P. 459 ∗ Power outlets P. 439 Cargo hooks P. 456 CTHPIAS028 Cargo net hooks P. 457 ∗ Grocery bag hooks P.
Page 54 Vehicles with third row seats Power outlets P. 436 ∗ Storage compartment P. 458 Cargo net hooks P. 457 Grocery bag hooks ∗ P. 459 Power outlets P. 439 CTHPIAS029 Cargo hooks P. 456 Cargo net hooks P. 457 ∗ : If equipped I n f o r ma t i o n P r o v i d e d b y :...
Page 55: 1-1. Key Information
1-1. Key information Keys The following keys are provided with the vehicle. Vehicles without a smart key system Master keys Operating the wireless remote control function (→P. 47) Valet key Key number plate Vehicles with a smart key system Electronic keys •...
Page 56 Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key (without a smart key system) or mechanical key (with a smart key system) is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 594) ■...
Page 57 When a vehicle key is lost (vehicles with a smart key system) If the key remains lost, the risk of vehicle theft increases significantly. Visit your Toyota dealer immediately with all remaining electronic keys that was provided with your vehicle.
Page 58: Opening, Closing And
1-2. Opening, closing and locking the doors ∗ Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) CTH12AS048 Locks and unlocks the side doors (→P.
Page 59 1-2. Opening, closing and locking the doors Unlocking and locking the side doors (front door handles only) Grip the handle to unlock the door. Make sure to touch the sensor on the back of the handle. The doors cannot be unlocked for 3 seconds after the doors are locked.
Page 60 1-2. Opening, closing and locking the doors Unlocking and locking the back door Press the button to unlock the door. The back window can be opened by pressing and holding this but- ton. (→P. 94) Press the button to lock the door. The back window can be closed by pressing and holding this but- ton.
Page 61 1-2. Opening, closing and locking the doors Antenna location and effective range ■ Antenna location Antennas outside the cabin Antennas inside the cabin Antenna outside the luggage compartment CTH12AS050 I n f o r ma t i o n P r o v i d e d b y :...
Page 62 1-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlock- ing the doors The system can be oper- ated when the electronic key is within about 2.3 ft. (0.7 m) either of the outside front door handles and back door.
Page 63 1-2. Opening, closing and locking the doors ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: once; Unlocked: twice) ■ When the door cannot be locked by the lock sensor on the upper part of the door handle Touch both lock sensors on the upper and lower part of the door handle simulta-...
Page 64 1-2. Opening, closing and locking the doors The following table describes circumstances and correction procedures when only alarms are sounded. Alarm Situation Correction procedure An attempt was made to lock the doors using the entry function while the electronic key was still inside the vehicle.
Page 65 1-2. Opening, closing and locking the doors Alarm Situation Correction procedure The “ENGINE START STOP” switch was pressed after the doors were Touch the electronic unlocked with the mechan- key to the “ENGINE ical key. Interior alarm START STOP” switch sounds once.
Page 66 1-2. Opening, closing and locking the doors ■ Conditions affecting operation The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system, wireless remote control and immobilizer system from operating properly.
Page 67 1-2. Opening, closing and locking the doors ■ Note for the entry function ● Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
Page 68 1-2. Opening, closing and locking the doors ● The lock sensor may not work properly if it comes into contact with ice, snow, mud, etc. Clean the lock sensor and attempt to operate it again, or use the lock sensor on the lower part of the door handle. ●...
Page 69 1-2. Opening, closing and locking the doors ■ Electronic key battery depletion ● The standard battery life is 1 to 2 years. ● As the electronic key always transmits radio waves, the battery will become depleted even if the electronic key is not used. The following symptoms indicate that the electronic key battery may be depleted.
Page 70 1-2. Opening, closing and locking the doors ■ When the electronic key battery is fully depleted →P. 528 ■ Customization that can be configured at Toyota dealer Settings (e.g. smart key system) can be changed. (Customizable features →P. 638) ■ Certification for the smart key system For vehicles sold in the U.S.A.
Page 71 (→P. 36) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of emitting the radio waves.
Page 72: Wireless Remote Control
CTH12AS045 Opens the windows and moon roof (press and hold) : This setting must be custom- ized at your Toyota dealer. Vehicles with a smart key system Locks all the doors Unlocks all the doors Pressing the button unlocks the driver’s door.
Page 73 1-2. Opening, closing and locking the doors ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: once; Unlocked: twice) ■ Door lock buzzer If an attempt to lock the doors is made when a door is not fully closed, a buzzer sounds continuously.
Page 74 1-2. Opening, closing and locking the doors ■ Conditions affecting operation Vehicles without a smart key system The wireless remote control function may not operate normally in the follow- ing situations: ● Near a TV tower, radio station, electric power plant, airport or other facil- ity that generates strong radio waves ●...
Page 75 1-2. Opening, closing and locking the doors ■ Customization that can be configured at Toyota dealer Settings (e.g. wireless remote control system) can be changed. (Customizable features →P. 638) ■ Certification for wireless remote control For vehicles sold in the U.S.A.
Page 76: Side Doors
1-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. ■ Entry function (vehicles with a smart key system) →P. 33 ■ Wireless remote control →P.
Page 77 1-2. Opening, closing and locking the doors ■ Door lock switch Locks all the doors Unlocks all the doors CTH12AS013 ■ Inside lock buttons Locks the door Unlocks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.
Page 78 1-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
Page 79 1-2. Opening, closing and locking the doors ■ Setting and canceling the functions To switch between setting and canceling, follow the procedure below: Vehicles without a smart key system STEP Close all the doors and turn the engine switch to the “ON” position.
Page 80 Using the mechanical key (vehicles with a smart key system) The doors can also be locked and unlocked with the mechanical key. (→P. 596) ■ Customization that can be configured at Toyota dealer Settings (e.g. door unlocking function) can be changed. (Customizable features →P. 638) CAUTION ■...
Page 81: Back Door
1-2. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened by the following procedures: ■ Locking and unlocking the back door Entry function (vehicles with a smart key system) →P. 34 Wireless remote control →P.
Page 82 1-2. Opening, closing and locking the doors Rear step bumper rear step bumper intended for rear end protection and easier step-up loading. CTH12AS019 ■ When closing the back door Lower the back door using the back door handle, and make sure to push the back door down from the outside to close it.
Page 83 1-2. Opening, closing and locking the doors CAUTION ■ Caution while driving ● Keep the back door closed. If the back door is left open, it may hit nearby objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard.
Page 84 Doing so may cause hands to be caught or the back door damper stay to break, causing an accident. ● Do not attach any accessories other than genuine Toyota parts to the back door. Such additional weight on the back door may cause the back door to fall closed again after it is opened.
Page 85 ● Do not touch the damper stay rod with gloves or other fabric items. ● Do not attach any accessories other than genuine Toyota parts to the back CTH12AS036 door. ● Do not place your hand on the damper stay or apply lateral forces to it.
Page 86: Adjustable Components
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Manual seat Seat position adjustment lever Vertical height adjustment lever (driver’s side only) Seatback angle adjustment lever Lumber support adjustment switch (driver’s side only) CTH13AS055 I n f o r ma t i o n P r o v i d e d b y :...
Page 87: Seat Position Adjustment
1-3. Adjustable components (seats, mirrors, steering wheel) Power seat Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch (driver’s side only) Vertical height adjustment switch (driver’s side only) Lumber support adjustment switch (driver’s side only) CTH13AS010 Active head restraints When the occupant’s lower back...
Page 88 1-3. Adjustable components (seats, mirrors, steering wheel) ■ The auto away function for exiting the driver seat If the seat is already close to the rearmost position, the auto away function may not operate when the driver exits the vehicle. ■...
Page 89 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Seat adjustment ● To reduce the risk of sliding under the lap belt during a collision, do not recline the seat more than necessary. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen, or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident.
Page 90: Rear Seats
1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats Vehicles without third row seats ■ Rear seat Pull up the seatback angle adjustment lever until the lock is released. CTH13AS013 I n f o r ma t i o n P r o v i d e d b y :...
Page 91 1-3. Adjustable components (seats, mirrors, steering wheel) Vehicles with third row seats ■ Second row seats Seat position adjustment lever Seatback angle adjustment lever CTH13AS053 ■ Third row seats The third row seats do not have a seat adjustment function. I n f o r ma t i o n P r o v i d e d b y :...
Page 92 1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the rear seats (vehicles without third row seats) ■ Before folding down the rear seats Adjust the head restraints to the downmost position. CTH13AS014 Stow the rear seat belt buckles. CTH13AS070 I n f o r ma t i o n P r o v i d e d b y :...
Page 93 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Folding down the rear seats Swing the bottom cushions up by pulling the lock release strap. When returning the rear seat cushions to their original posi- tions, make sure they are locked securely.
Page 94 1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the second row seats (vehicles with third row seats) ■ Before folding down the second row seats Adjust the head restraints to the STEP downmost position. CTH13AS045 Stow the second row seat belt STEP buckles.
Page 95 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Folding down the second row seats Pull the seatback lock release lever and fold the seatback down. To return the second row seat- backs to their original positions, lift them up until they lock. CTH13AS051 ■...
Page 96 1-3. Adjustable components (seats, mirrors, steering wheel) Moving a second row seat for access to the third row seats (vehicles with third row seats) ■ Getting in the vehicle (right side only) Pull up the lever and fold down the seatback. The seat will slide forward.
Page 97 1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the third row seats (vehicles with third row seats) ■ Before folding down the third row seats Pass the seat belts through the seat belt hangers and secure the seat belt plates. This prevents the shoulder belts from being damaged.
Page 98 1-3. Adjustable components (seats, mirrors, steering wheel) Pull the lever to unlock the seat- STEP back and then fold the seatback down. CTH13AS027 From outside Pull the strap to fold down the STEP head restraint. CTH13AS028 Pull the lever up. STEP The seat cushion will slide back- ward and the seatback will be...
Page 99 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Returning the third row seats As the seat cushions cannot be pulled forward from outside, this operation can only be performed from inside. Raise the seatbacks to their orig- STEP inal positions. Make sure they...
Page 100 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ When folding the rear seatbacks down Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.
Page 101: Head Restraints
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Front and second seats Pull the head restraints up. Down Lock release Push the head restraint down button while pushing the lock release button. CTH13AS031 Third seats (vehicles with third row seats) To use...
Page 102 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Removing the head restraints (except third row seats) Pull the head restraint up while pressing the lock release button. CTH13AS036 ■ Installing the head restraints (except third row seats) Align the head restraint with the installa- tion holes and push it down to the lock position.
Page 103 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ● Use the head restraints designed for each respective seat. ●...
Page 104: Seat Belts
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 105 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the seat belt shoulder anchor height (front seats) Push the seat belt shoulder anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.
Page 106 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully.
Page 107 Toyota dealer free of charge. CTH13AS044 I n f o r ma t i o n P r o v i d e d b y :...
Page 108 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
Page 109 ● Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there’s no obvious damage.
Page 110 1-3. Adjustable components (seats, mirrors, steering wheel) NOTICE ■ When using a seat belt extender When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and the extender itself. I n f o r ma t i o n P r o v i d e d b y :...
Page 111: Steering Wheel
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and STEP push the lever down. CTH13AS007 Adjust to the ideal position by STEP moving the steering wheel horizontally and vertically.
Page 112: Inside Rear View Mirror
1-3. Adjustable components (seats, mirrors, steering wheel) Inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions: Manual anti-glare inside rear view mirror (if equipped) Normal position Anti-glare position CTH13AS001 Auto anti-glare inside rear view mirror (if equipped) In automatic mode, sensors are used to detect the headlights of vehicles behind and the reflected light is automatically reduced.
Page 113 1-3. Adjustable components (seats, mirrors, steering wheel) ■ To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) To ensure that the sensors operate prop- erly, do not touch or cover them. CTH13AS047 CAUTION ■ Caution while driving Do not adjust the position of the mirror while driving.
Page 114: Outside Rear View Mirrors
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch. To select a mirror to adjust, STEP press the switch. Left Right CTH13AS004 To adjust the mirror, press the STEP switch. Right Down Left...
Page 115 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Mirror angle can be adjusted when Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.
Page 116: Power Windows
1-4. Opening and closing the windows and moon roof Power windows The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing Opening One-touch opening : Pushing the switch in the opposite direction will stop window travel partway.
Page 117 If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly. ■ Customization that can be configured at Toyota dealer Settings (e.g. linked door lock operation) can be changed. (Customizable features →P. 638)
Page 118 1-4. Opening and closing the windows and moon roof CAUTION ■ Closing the windows Observe the following precautions. Failure to do so may result in death or serious injury. ● Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a window is being operated.
Page 119: Power Back Window
1-4. Opening and closing the windows and moon roof Power back window The power back window can be opened and closed using the switch or key. From inside the vehicle Closing One-touch closing Opening One-touch opening : Pressing the switch in the opposite direction will stop window travel partway.
Page 120 1-4. Opening and closing the windows and moon roof From outside the vehicle (vehicles with a smart key system) Opening (push and hold) Closing (push and hold) This operation can only be per- formed when the electronic key is within the detection range. CTH14AS018 ■...
Page 121 If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly. ■ Customization that can be configured at Toyota dealer Settings (e.g. linked operation) can be changed. (Customizable features →P. 638)
Page 122 1-4. Opening and closing the windows and moon roof CAUTION ■ Caution while driving Keep the back door and back window closed while driving. If the back door or the back window is left open, the back door may hit nearby objects while driving or luggage may be unexpectedly thrown out, causing an accident.
Page 123: Moon Roof
1-4. Opening and closing the windows and moon roof ∗ Moon roof Use the overhead switches to open and close the moon roof and tilt it up and down. ■ Opening and closing Opens the moon roof Closes the moon roof : Lightly press the switch in either direction to stop the moon roof partway.
Page 124 1-4. Opening and closing the windows and moon roof ■ The moon roof can be operated when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■...
Page 125 If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 126 An alarm will sound when the driver’s door is opened with the moon roof not fully closed and the “ENGINE START STOP” switch off. ■ Customization that can be configured at Toyota dealer Settings (e.g. linked door lock operation) can be changed. (Customizable features →P. 638) CAUTION ■...
Page 127: Refueling Opening The Fuel Tank Cap
1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: ■ Before refueling the vehicle Vehicles without a smart key system Turn the engine switch off and ensure that all the doors and win- dows are closed.
Page 128 1-5. Refueling Hang the fuel tank cap on the STEP back of the fuel filler door. CTH15AS003 Closing the fuel tank cap After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will turn slightly in the opposite direction.
Page 129 ■ When replacing the fuel cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 130 1-5. Refueling NOTICE ■ Refueling Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the emission control system to operate abnormally or damaging fuel system components or the vehicle's painted surface. I n f o r ma t i o n P r o v i d e d b y :...
Page 131: 1-6. Theft Deterrent System
1-6. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. Vehicles without a smart key system The indicator light flashes after...
Page 132 1-6. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the grip portion of the key is in contact with a metallic object ●...
Page 133 1-6. Theft deterrent system CAUTION ■ Certifications for the immobilizer system Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTICE ■ To ensure the system operates correctly Do not modify or remove the system.
Page 134: Alarm
1-6. Theft deterrent system ∗ Alarm The system sounds the alarm and flashes the lights when forced entry is detected. ■ Triggering of the alarm The alarm is triggered in the following situations: ● A locked door is unlocked or opened in any way other than using the entry function, wireless remote control or mechani- cal key with the alarm being set.
Page 135 1-6. Theft deterrent system ■ Items to check before locking the vehicle To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following: ● Nobody is in the vehicle. ● The windows and moon roof are closed before the alarm is set. ●...
Page 136: Theft Prevention Labels (For U. S. A.)
1-6. Theft deterrent system Theft prevention labels (for U. S. A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law. I n f o r ma t i o n P r o v i d e d b y :...
Page 137: 1-7. Safety Information
1-7. Safety information Correct driving posture Drive with a good posture as follows: Sit upright and well back in the seat. (→P. 61) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 138 1-7. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver’s seat. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
Page 139: Srs Airbags
1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. CTH17AS103 SRS front airbags SRS driver airbag/front passenger airbag...
Page 140 1-7. Safety information SRS airbag system components CTH17AS100 Side airbags Occupant detection system (ECU and sensors) “AIR BAG ON” and “AIR BAG OFF” indicator lights Curtain shield airbag sensors Curtain shield airbags warning light “RSCA OFF” indicator light Front passenger airbag Roll sensing of curtain shield Knee airbags airbags off switch...
Page 141 1-7. Safety information Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag system controls airbag deployment power for the driver and front pas- senger. The driver airbag system consists of the driver’s seat belt buckle switch etc.
Page 142 1-7. Safety information ■ SRS airbag deployment conditions (SRS front airbags) ● The front SRS airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to an approxi- mately 12 - 18 mph [20 - 30 km/h] frontal collision with a fixed wall that does not move or deform).
Page 143 1-7. Safety information ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. ●...
Page 144 1-7. Safety information ■ Types of collisions that may not deploy the SRS airbags (SRS side airbags and curtain shield airbags) The SRS side airbag and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a colli- sion to the side of the vehicle body other than the passenger compartment.
Page 145 1-7. Safety information ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. Do not disconnect the battery cables before contacting your Toyota dealer. ● Any of the SRS airbags have been inflated.
Page 146 1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly.
Page 147 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
Page 148 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. CTH17AS015 ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger.
Page 149 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not attach anything to or lean any- thing against areas such as the dash- board, steering wheel pad and lower portion of the instrument panel. These items can become projectiles when the SRS driver, front passenger and knee airbags deploy.
Page 150 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 151 Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 152 1-7. Safety information Deactivating the curtain shield airbags in a vehicle rollover On/off (hold for a few seconds) Vehicles without a smart key sys- tem: The “RSCA OFF” indicator turns on. (only when the engine switch is in the “ON” position). The roll sensing function for the curtain shield airbags and seat belt pretensioners will turn back...
Page 153 1-7. Safety information CAUTION ■ During normal driving Make sure the “RSCA OFF” indicator light is not turned on. If it is left on, the curtain shield airbags will not activate in the event of an accident, which may cause death or serious injury. I n f o r ma t i o n P r o v i d e d b y :...
Page 154: Front Passenger Occupant Classification System
1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for the front passenger.
Page 155 1-7. Safety information Condition and operation in the front passenger occupant classi- fication system ■ Adult “AIR BAG ON” and “AIR BAG OFF” “AIR BAG indicator lights ON” Indicator/ warning light SRS warning light Front passenger’s seat belt reminder light Flashing Front passenger airbag Side airbag on the front passenger seat...
Page 156 1-7. Safety information ■ Unoccupied “AIR BAG ON” and “AIR BAG OFF” Not illumi- indicator lights nated Indicator/ warning light SRS warning light Front passenger’s seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Activated Curtain shield airbag in the front Devices...
Page 157 1-7. Safety information ■ There is a malfunction in the system “AIR BAG ON” and “AIR BAG OFF” “AIR BAG indicator lights OFF” Indicator/ warning light SRS warning light Front passenger's seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Activated Curtain shield airbag in the front Devices...
Page 158 1-7. Safety information CAUTION ■ Front passenger occupant classification system precautions Observe the following precautions regarding the front passenger occupant classification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front passenger’s seat belt plate has not been left inserted into the buckle before someone sits in the front passenger seat.
Page 159 Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the second seat should not contact the front seatbacks.
Page 160: Child Restraint Systems
1-7. Safety information Child restraint systems A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.
Page 161 1-7. Safety information Forward facing — Convertible seat CTH17AS025 Booster seat CTH17AS026 ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the child becomes large enough to properly wear the vehicle’s seat belt. ●...
Page 162 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 163 1-7. Safety information CAUTION ■ Child restraint precautions ● Do not use the seat belt extender when installing a child restraint system on the front or rear passenger seat. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or seri- ous injury to the child or other passengers in the event of a sudden stop, sudden swerve or an accident.
Page 164: Installing Child Restraints
1-7. Safety information Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure the child restraints using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system.
Page 165 1-7. Safety information Seat belts equipped with a child restraint locking mecha- nism (ALR/ELR belts except driver’s seat belt) (→P. 79) CTH17AS029 Vehicles without third row seats Anchor brackets (for top tether strap) An anchor bracket is provided for each rear seat. CTH17AS030 Vehicles with third row seats Anchor brackets (for top tether...
Page 166 1-7. Safety information Installation with LATCH system (rear/second row seats only) ■ Installing on the rear seats (vehicles without third row seats) Fold the seatback while pulling STEP the seatback angle adjustment lever. Return the seatback and secure it at the first lock position. (→P.
Page 167 1-7. Safety information Type B Latch the buckles onto the STEP LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.
Page 168 1-7. Safety information Type A Latch the hooks of the lower STEP straps onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.
Page 169 1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear facing ⎯ Infant seat/convertible seat ■ Place the child restraint system STEP on the rear seat facing the rear of the vehicle. CTH17AS038 Run the seat belt through the STEP child restraint system and insert the plate into the buckle.
Page 170 1-7. Safety information While pushing the child restraint STEP system down into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to CTH17AS041 check that it cannot be extended.
Page 171 1-7. Safety information While pushing the child restraint STEP system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to CTH17AS045 check that it cannot be extended.
Page 172 1-7. Safety information Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. CTH17AS048 Child restraint systems with a top tether strap Secure the child restraint system STEP using a seat belt or the lower anchors, and remove the head restraint.
Page 173 1-7. Safety information Open the anchor bracket cover, STEP latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched. CTH17AS071 Replace the head restraint. STEP CTH17AS099 ■ Laws and regulations pertaining to anchorages The LATCH system conforms to FMVSS225 or CMVSS210.2.
Page 174 1-7. Safety information CAUTION ■ When installing a booster seat To prevent the belt from going into ALR lock mode, do not fully extend the shoulder belt. ALR mode causes the belt to tighten only. This could cause injury or discomfort to the child. (→P. 81) ■...
Page 175 1-7. Safety information CAUTION ■ When installing a child restraint system ● Vehicles with third row seats: When using the LATCH anchors for a child restraint system, move the seat as far back as possible, with the seatback close to the child restraint system. ●...
Page 176 1-7. Safety information CAUTION ■ Do not use a seat belt extender If a seat belt extender is used when installing a child restraint system, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of sud- den braking, sudden swerving or an accident.
Page 177 1-7. Safety information I n f o r ma t i o n P r o v i d e d b y :...
Page 178: 2-1. Driving Procedures
2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing: ■ Starting the engine →P. 164, 167 ■ Driving With the brake pedal depressed, shift the shift lever to D. STEP (→P. 173) Release the parking brake.
Page 179 Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodically or when- ever the parking brake shoes and/or drum are replaced. Have your Toyota dealer perform the bedding down operation.
Page 180 Large amounts of exhaust in the vehi- cle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately. I n f o r ma t i o n P r o v i d e d b y :...
Page 181 2-1. Driving procedures CAUTION ● Do not shift the shift lever to P while the vehicle is moving. Doing so can damage the transmission and may result in a loss of vehicle control. ● Do not shift the shift lever to R while the vehicle is moving forward. Doing so can damage the transmission and may result in a loss of vehicle control.
Page 182 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
Page 183 2-1. Driving procedures CAUTION ■ When the vehicle is stopped ● Do not race the engine. If the vehicle is in any gear other than P or N, the vehicle may accelerate suddenly and unexpectedly, causing an accident. ● Do not leave the vehicle with the engine running for a long time. If such a situation cannot be avoided, park the vehicle in an open space and check that exhaust fumes do not enter the vehicle interior.
Page 184 The exhaust system should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard.
Page 185 2-1. Driving procedures CAUTION ■ When taking a nap in the vehicle Always turn the engine off. Otherwise, if you accidentally move the shift lever or depress the accelerator pedal, this could cause an accident or fire due to engine overheating. Additionally, if the vehicle is parked in a poorly venti- lated area, exhaust gases may collect and enter the vehicle, leading to death or a serious health hazard.
Page 186 2-1. Driving procedures NOTICE ■ When driving the vehicle Do not use the accelerator pedal or depress the accelerator and brake ped- als at the same time to hold the vehicle on a hill. ■ When parking the vehicle Always shift the shift lever to P. Failure to do so may cause the vehicle to move or the vehicle may accelerate suddenly if the accelerator pedal is acci- dentally depressed.
Page 187 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: ● Brake function ●...
Page 188: Engine (Ignition) Switch (Vehicles Without A Smart Key System)
2-1. Driving procedures Engine (ignition) switch (vehicles without a smart key system) ■ Starting the engine Check that the parking brake is set. STEP Check that the shift lever is set in P. STEP Firmly depress the brake pedal. STEP Turn the engine switch to the “START”...
Page 189 2-1. Driving procedures ■ Turning the key from “ACC” to “LOCK” Shift the shift lever to P. STEP Push in the key and turn to the “LOCK” STEP position. CTH21AS017 ■ If the engine does not start The engine immobilizer system may not have been deactivated. (→P. 106) ■...
Page 190 2-1. Driving procedures CAUTION ■ When starting the engine Always start the engine while sitting in the driver's seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■...
Page 191: Engine (Ignition) Switch (Vehicles With A Smart Key System)
2-1. Driving procedures Engine (ignition) switch (vehicles with a smart key system) Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes. ■ Starting the engine Check that the parking brake is set. STEP Check that the shift lever is set in P.
Page 192 2-1. Driving procedures ■ Changing “ENGINE START STOP” switch modes Modes can be changed by pressing the “ENGINE START STOP” switch with brake pedal released. (The mode changes each time the switch is pressed.) Off* The emergency flashers can be used. ACCESSORY mode Some electrical components such as the audio system can...
Page 193 2-1. Driving procedures When stopping the engine with the shift lever in a position other than P If the engine is stopped with the shift lever in a position other than P, the “ENGINE START STOP” switch will not be turned off but instead be turned to ACCESSORY mode.
Page 194 ■ When the “ENGINE START STOP” switch indicator flashes in amber The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ If the electronic key battery is depleted →P. 528...
Page 195 2-1. Driving procedures CAUTION ■ When starting the engine Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■...
Page 196 If the “ENGINE START STOP” seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction. Contact your Toyota dealer immediately. I n f o r ma t i o n P r o v i d e d b y :...
Page 197: Automatic Transmission
2-1. Driving procedures Automatic transmission Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Standard type CTH21AS030 While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. When shifting the shift lever between P and D, make sure that the vehicle is completely stopped.
Page 198 2-1. Driving procedures Multi-mode type CTH21AS014 Vehicles without a smart key system: While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. Vehicles with a smart key system: While the “ENGINE START STOP” switch is in IGNITION ON mode, move the shift lever with the brake pedal depressed.
Page 199 2-1. Driving procedures ■ Shift position purpose Function Shift position Standard type Multi-mode type Parking the vehicle/ starting the engine Reversing Neutral Normal driving S mode driving ⎯ (→P. 176) Position for engine ⎯ braking Position for more ⎯ powerful engine braking Position for maximum ⎯...
Page 200 2-1. Driving procedures Changing shift ranges in S mode (multi-mode type) When the shift lever is in the S position, the shift lever can be oper- ated as follows: Non-Optitron type meter For upshifting For downshifting CTH21AS025 Optitron type meter For upshifting For downshifting CTH21AS015...
Page 201 2-1. Driving procedures ■ Downshifting restrictions (standard type) The maximum allowable speeds are as follows. Downshifting Maximum speed mph (km/h) 3 → 2 67 (108) 2 → L 32 (52) ■ S mode (multi-mode type) When the shift range is “3” or lower, holding the shift lever toward “+” sets the shift range to “5”.
Page 202 S (multi-mode type) This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the transmission will operate in the same manner as when the shift lever is in D.) ■...
Page 203: Turn Signal Lever
2-1. Driving procedures Turn signal lever The turn signal lever can be used to show the following intentions of the driver: Right turn Left turn Lane change to the right (push and hold the lever partway) The right hand signals will flash until you release the lever.
Page 204: Parking Brake
2-1. Driving procedures Parking brake To set the parking brake, fully depress the parking brake BRAKE BRAKE pedal with your left foot while Type A Type B Type C depressing the brake pedal with your right foot. (Depressing the pedal again releases the parking brake.) CTH21AS026 ■...
Page 205: Horn
2-1. Driving procedures Horn To sound the horn, press on or close to the mark. CTH21AS022 ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (→P.
Page 206: Instrument Cluster Gauges And Meters
2-2. Instrument cluster Gauges and meters Non-Optitron type meters Optitron type meters I n f o r ma t i o n P r o v i d e d b y :...
Page 207 2-2. Instrument cluster Tachometer Displays the engine speed in revolutions per minute Speedometer Displays the vehicle speed Display change button →P. 184 Engine coolant temperature gauge Displays the engine coolant temperature Fuel gauge Displays the quantity of fuel remaining in the tank Eco Driving Indicator Zone Display →P.
Page 208 2-2. Instrument cluster Switching the display Items displayed can be switched by pressing the display change button. ■ Odometer Displays the total distance the vehicle has been driven. ■ Trip meter Displays the distance the vehicle has been driven since the meter was last reset.
Page 209 2-2. Instrument cluster ■ Eco Driving Indicator and average fuel consumption Non-Optitron type meter Eco Driving Indicator Light During environment-friendly acceleration operation (Eco driv- ing), Eco Driving Indicator Light will turn on. Eco Driving Indicator Zone Display Suggests Zone of Eco driving with current Eco driving ratio based on accelerator pedal oper- ation.
Page 210 2-2. Instrument cluster Optitron type meter Eco Driving Indicator Light During environment-friendly acceleration operation (Eco driv- ing), Eco Driving Indicator Light will turn on. Eco Driving Indicator Zone Display Suggests Zone of Eco driving with current Eco driving ratio based on accelerator pedal oper- ation.
Page 211 2-2. Instrument cluster ■ Eco Driving Indicator Light on/off Non-Optitron type meter Eco Driving Indicator Light can be switched on or off by pressing and holding the display change button. Optitron type meter Eco Driving Indicator Light can be switched on or off by pressing and holding the display change button.
Page 212 When the voltmeter indicates more than 19 V or less than 9 V, the battery may be malfunctioning. Have your vehicle checked at your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 213: Indicators And Warning Lights
2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster (non-Optitron type meter) CTH22AS052 Instrument cluster (Optitron type meter) CTH22AS053 I n f o r ma t i o n P r o v i d e d b y :...
Page 214 2-2. Instrument cluster Center panel CTH22AS015 I n f o r ma t i o n P r o v i d e d b y :...
Page 215 2-2. Instrument cluster ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. “TRC OFF” indicator Turn signal indicator (→P. 255) (→P. 179) (Canada) Roll sensing of curtain Headlight high beam shield airbags off indica- indicator (→P.
Page 216 Have the vehicle inspected by your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 217: Warning Lights
Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Page 218: Accessory Meter
2-2. Instrument cluster Accessory meter The accessory meter presents the driver with a variety of driving- related data including the current outside air temperature. “MODE/ ” button “SET/ ” button Trip information (→P. 195) Displays driving range and average fuel consumption Outside temperature display (→P.
Page 219: Driving Range
2-2. Instrument cluster Trip information Items displayed can be switched by pressing the “MODE/ ” button. ■ Driving range Displays the estimated maximum distance that can be driven with the quantity of fuel remaining • This distance is computed based on your average (vehicles without fuel consumption.
Page 220 2-2. Instrument cluster Accessory meter light control The daytime brightness of the accessory meter can be adjusted. Turn the headlight switch off. STEP Press and hold the “MODE/ ” button. STEP Press the “MODE/ ” or “SET/ ” button. STEP Vehicles without Multi-terrain Select Vehicles with Multi-terrain Select Press and hold the “SET/...
Page 221 2-2. Instrument cluster ■ When the average fuel consumption is reset The average fuel consumption displayed on the instrument cluster and “Past Record” screen of the navigation system (if equipped) will be reset at the same time. ■ Adjusting the brightness of the accessory meter ●...
Page 222: Operating The Lights And
2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Turning the end of the lever turns on the lights as follows: Type A The daytime running light system is on. The side marker, park- ing, tail, license plate and instrument panel lights turn on.
Page 223 2-3. Operating the lights and wipers Type B The headlights, park- ing lights and so on turn on and off auto- matically (when the “ENGINE START STOP” switch is in IGNITION ON mode). The side marker, park- ing, tail, license plate and instrument panel lights turn on.
Page 224 2-3. Operating the lights and wipers Type C The side marker, park- ing, tail, license plate and instrument panel lights turn on. The headlights and all the lights listed above turn on. CTH23AS030 I n f o r ma t i o n P r o v i d e d b y :...
Page 225 2-3. Operating the lights and wipers Type D The headlights, park- ing lights and so on turn on and off auto- matically (when the “ENGINE START STOP” switch is in IGNITION ON mode). The side marker, park- ing, tail, license plate and instrument panel lights turn on.
Page 226 2-3. Operating the lights and wipers ■ Daytime running light system To make your vehicle more visible to other drivers, the daytime running lights turn on automatically whenever the engine is started and the parking brake is released. Daytime running lights are not designed for use at night. Type A and B: Daytime running lights can be turned off by operating the switch.
Page 227 To turn the lights on again, turn the “ENGINE START STOP” switch to IGNI- TION ON mode, or turn the light switch off and then back to ■ Customization that can be configured at Toyota dealer Settings (e.g. light sensor sensitivity) can be changed. (Customizable features →P. 638) NOTICE ■...
Page 228: Fog Light Switch
2-3. Operating the lights and wipers ∗ Fog light switch The fog lights secure excellent visibility in difficult driving condi- tions, such as in rain and fog. Turns the front fog lights off Turns the front fog lights on CTH23AS010 ■...
Page 229: Windshield Wipers And Washer
2-3. Operating the lights and wipers Windshield wipers and washer When intermittent windshield wiper operation is selected, the wiper interval can be adjusted. The wiper operation is selected by moving the lever as follows. Intermittent windshield wiper operation Low speed windshield wiper operation High speed...
Page 230 2-3. Operating the lights and wipers Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts. CTH23AS029 ■ The windshield wipers and washer can be operated when Vehicles without a smart key system: The engine switch is in the “ON” posi- tion.
Page 231: Rear Window Wiper And Washer
2-3. Operating the lights and wipers Rear window wiper and washer Before operating the rear window wiper and washer switch, make sure the back window is completely closed. (→P. 94) The wiper operation is selected by moving the lever as follows: Intermittent window wiper operation Normal window wiper oper-...
Page 232 Check that the washer nozzle is not blocked if there is washer fluid in the washer fluid reservoir. ■ Customization that can be configured at Toyota dealer Settings (e.g. drip prevention function) can be changed. (Customizable features →P. 638) NOTICE ■...
Page 233: Using Other Driving
2-4. Using other driving systems ∗ Cruise control Use cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch CTH24AS001 ■ Setting the vehicle speed Press the “ON-OFF” button to STEP activate the cruise control. Press the button again to deactivate the cruise control.
Page 234 2-4. Using other driving systems ■ Adjusting the set speed Increases the speed Decreases the speed Hold the lever until the desired speed setting is obtained. Fine adjustment of the set speed can be made by lightly pushing the lever up or down and releasing it.
Page 235 Have the vehicle inspected by your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 236 2-4. Using other driving systems CAUTION ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
Page 237: Intuitive Parking Assist
2-4. Using other driving systems ∗ Intuitive parking assist The distance from your vehicle to nearby obstacles when parallel parking or maneuvering into a garage is measured by the sensors and communicated via an indicator and a buzzer. Always check the surrounding area when using this system.
Page 238 2-4. Using other driving systems The indicator and buzzer When a sensor detects an obstacle, the direction of the obstacle is indicated and the buzzer sounds. ■ Sensor operation and distance to an obstacle The system operates when the vehicle approaches an obstacle, as shown by the following table.
Page 239 2-4. Using other driving systems Detection range of the sensors Approximately 1.6 ft. (50 cm) Approximately 4.9 ft. (150 cm) The diagram shows the detection range of the sensors. Note that the sensors cannot detect obsta- cles that are extremely close to the vehicle.
Page 240 • The vehicle is approaching a tall or right-angled curb. • In harsh sunlight or intense cold weather • A non-genuine Toyota suspension (lowered suspension etc.) is installed. In addition to the examples above, there are instances in which, because of their shape, signs and other objects may be judged by a sensor to be closer than they are.
Page 241 7 seconds. If the indicator comes on and stays on after that, have the vehicle inspected by your Toyota dealer. ■ Customization that can be configured at Toyota dealer Settings (e.g. buzzer volume) can be changed. (Customizable features →P. 638) ■...
Page 242: Rear View Monitor System (Rear View Mirror-Attached Type)
2-4. Using other driving systems ∗ Rear view monitor system (rear view mirror-attached type) The rear view monitor assists the driver by displaying an image of the area behind the vehicle while reversing. The image is displayed in reverse on the screen. This reversed image is a similar image to the one on the inside rear view mirror.
Page 243 2-4. Using other driving systems ■ The rear view monitor system can be operated when Vehicles without a smart key system: The engine switch is in the “ON” posi- tion and the shift lever is in R. Vehicles with a smart key system: The “ENGINE START STOP” switch is in IGNITION ON mode and the shift lever is in R.
Page 244 2-4. Using other driving systems ■ Displayed area The area covered by the camera is lim- ited. Objects that are close to either cor- ner of the bumper or under the bumper cannot be seen on the screen. The area displayed on the screen may vary depending on vehicle orientation or road conditions.
Page 245 2-4. Using other driving systems ● Water droplets are on the camera lens or humidity is high, such as when it rains. ● Foreign matter, such as snow or mud, adheres to the camera lens. ● When the camera has scratches or dirt on it.
Page 246 If this happens, wipe it off as soon as possible. ● When replacing tires, please consult your Toyota dealer. If you replace the tires, the area displayed on the screen may change. I n f o r ma t i o n P r o v i d e d b y :...
Page 247: Four-Wheel Drive System (Part-Time 4Wd Models)
2-4. Using other driving systems Four-wheel drive system (part-time 4WD models) Use the front-wheel drive control lever to select the following trans- fer modes: CTH24AS015 The four-wheel drive indicator comes on when H4, N or L4 mode is selected. H2 (high speed position, two-wheel drive) Normal driving.
Page 248 If the four-wheel drive or low speed four-wheel drive indicator flashes rapidly There may be a malfunction in the four-wheel drive system. Have the vehicle inspected by your Toyota dealer immediately. ■ Four-wheel drive usage frequency You should drive in four-wheel drive for at least 10 miles (16 km) each month.
Page 249 2-4. Using other driving systems CAUTION ■ Shifting the front-wheel drive control lever from H2 to H4 while driving Never operate the front-wheel drive control lever if the wheels are slipping. Stop the slipping or spinning before shifting. I n f o r ma t i o n P r o v i d e d b y :...
Page 250: Four-Wheel Drive System (Full-Time 4Wd Models)
2-4. Using other driving systems Four-wheel drive system (full-time 4WD models) Use the four-wheel drive control switch to select the following trans- fer modes: CTH24AS016 H4F (high speed position) Normal driving on all types of roads. H4L (high speed position, center differential locked) For when your vehicle’s wheel gets stuck in a ditch or when you are driving on a slippery or bumpy surface.
Page 251 2-4. Using other driving systems Shifting between H4F and H4L Push the “UNLOCK” button and turn the four-wheel drive control switch to H4L or H4F. This can be done at any speed. The center differential lock indica- tor will turn on (H4L) or go off (H4F).
Page 252 2-4. Using other driving systems ■ Shifting from L4L to H4L Stop the vehicle completely. STEP Shift the shift lever to N. STEP Push the “UNLOCK” button and STEP turn the four-wheel drive control switch to H4L. Maintain this condition until the low speed four-wheel drive indi- cator goes off.
Page 253 If the low speed four-wheel drive indicator or the center differential lock indicator flashes rapidly There may be a malfunction in the four-wheel drive system. Have the vehicle inspected by your Toyota dealer immediately. CAUTION ■ Operating the four-wheel drive control switch Never operate the four-wheel drive control switch if the wheels have lost traction.
Page 254: Active Traction Control System
2-4. Using other driving systems ∗ Active traction control system The active traction control system automatically helps prevent the spinning of 4 wheels when the vehicle is started or accelerated on slippery road surfaces. ■ System operation Part-time 4WD models: STEP Stop the vehicle, shift the shift lever to N and shift the front- wheel drive control lever into L4.
Page 255 2-4. Using other driving systems When the active traction control system is operating If all wheels spin, the slip indica- tor flashes to indicate that the active traction control system has been engaged. CTH24AS047 ■ When the rear differential is locked (vehicles with a rear differential lock system) The active traction control system is activated only when vehicle speed is less than 4 mph (6 km/h).
Page 256: Auto Lsd System (2Wd Models)
2-4. Using other driving systems AUTO LSD system (2WD models) The AUTO LSD system aids traction by using the traction control system to control engine performance and braking when one of the rear wheels begins to spin. The system should be used only when wheel spinning occurs in a ditch or rough surface.
Page 257 2-4. Using other driving systems When the AUTO LSD system is operating If the rear wheels spin, the slip indicator flashes to indicate that the AUTO LSD system has con- trolled the spinning of the rear wheels. CTH24AS047 ■ If the engine is turned off and restarted The AUTO LSD system and the indicators are automatically turned off.
Page 258 2-4. Using other driving systems NOTICE ■ Activating while driving Never activate the AUTO LSD system if the wheel is slipping. Stop the slipping or spinning before activating. I n f o r ma t i o n P r o v i d e d b y :...
Page 259: Rear Differential Lock System
2-4. Using other driving systems ∗ Rear differential lock system The rear differential lock system is provided for use only when wheel spinning occurs in a ditch or on a slippery or rugged surface. The rear differential lock system is effective in case one of the rear wheels is spinning.
Page 260 2-4. Using other driving systems Using the rear differential lock system Before using the rear differential lock system: STEP Stop the vehicle, shift the shift lever to N and shift the front- wheel drive control lever into L4 to see if this is sufficient. If this has no effect, additionally use the rear differential lock system.
Page 261 2-4. Using other driving systems CAUTION ■ To avoid an accident ● Do not use the rear differential lock system except when wheel spinning occurs in a ditch or on a slippery or rugged surface. Large steering effort and careful cornering control will be required. ●...
Page 262: Downhill Assist Control System
2-4. Using other driving systems ∗ Downhill assist control system With the downhill assist control system, the vehicle is able to descend a steep hill while maintaining a constant low speed of about 3 mph (5 km/h) without brake pedal operation. ■...
Page 263 2-4. Using other driving systems While the downhill assist control system is operating The slip indicator will flash to indicate that the downhill assist control system is operating, and the stop lights and high mounted stoplight will turn on. CTH24AS047 ■...
Page 264 “ON” position (vehicles without a smart key system) or the “ENGINE START STOP” switch is turned to IGNITION ON mode (vehicles with a smart key system). Have your vehicle inspected by your Toyota dealer. CAUTION ■...
Page 265: Crawl Control
2-4. Using other driving systems ∗ Crawl Control Allows travel on extremely rough off-road surfaces at a fixed low speed without pressing the accelerator or brake pedal. Minimizes loss of traction or vehicle slip when driving on slippery road sur- faces, allowing for stable driving.
Page 266 2-4. Using other driving systems ■ Speed modes The following table shows some typical terrains and the recommended speed modes. Mode Road condition L (Low) Rock, mogul (downhill) and gravel (downhill) Between L and M Mogul (uphill) M (Medium) Snow, mud, gravel (uphill), sand, Between M and H dirt, mogul (uphill) and grass H (High)
Page 267 2-4. Using other driving systems ■ Crawl Control is temporarily canceled when Vehicle speed exceeds 15 mph (25 km/h). The Crawl Control indicator flashes until the vehicle speed is reduced. ■ Automatic system cancelation In the following situations, the system will cease operation and a buzzer will sound to alert the driver.
Page 268 2-4. Using other driving systems CAUTION ■ When using Crawl Control ● Do not overly rely on Crawl Control. This function does not extend the vehicle’s performance limitations. Always check the terrain thoroughly and drive safely. ● The recommended speed modes for the listed terrains (→P. 242) are only a reference.
Page 269: Multi-Terrain Select
2-4. Using other driving systems ∗ Multi-terrain Select The Multi-terrain Select system has 4 terrain modes. When a terrain mode is selected in accordance with terrain conditions, engine power and active traction control system is controlled to enhance off-road drivability. Additionally, guidance messages such as transfer mode selection advice are displayed on the accessory meter to assist the driver in operating the vehicle.
Page 270 2-4. Using other driving systems ■ Multi-terrain Select modes Symbol Mode MUD & SAND LOOSE ROCK MOGUL ROCK I n f o r ma t i o n P r o v i d e d b y :...
Page 271 2-4. Using other driving systems The following table shows some typical terrains and the recom- mended Multi-terrain Select modes. Mode LOOSE MUD & ROCK MOGUL Road ROCK SAND condition Rock Mogul Bump, groove Slope/ V-ditch Uphill/ downhill Riverbed Gravel Bush Deep snow Sand Dirt...
Page 272 2-4. Using other driving systems Selecting modes Press the “ON/OFF” switch. STEP All the mode indicators will come on and then go off except the indi- cator for the present mode. The applicable road conditions will be displayed accessory meter. Turn the dial to select the STEP desired mode.
Page 273 2-4. Using other driving systems Messages displayed on the accessory meter Depending on switch operation, one of the following messages may appear on the accessory meter to provide guidance on transfer mode selection etc: Message Details Procedure Indicates that the SHIFT TO 4WD Shift the front-wheel transfer mode needs...
Page 274 “ON/OFF” switch) Indicates that Multi- Multi-terrain Select terrain Select cannot NOT AVAILABLE be operated because Contact your Toyota (When pressing the the VSC and/or 4WD dealer. “ON/OFF” switch) system may be mal- functioning. I n f o r ma t i o n P r o v i d e d b y :...
Page 275 ● One of the vehicle systems related to Multi-terrain Select may be mal- functioning. Have your vehicle inspected by your Toyota dealer. ● The brake actuator may be at risk of overheating. A buzzer will sound, the “A-TRAC” indicator will go off and the “TRAC OFF (TRC OFF)”...
Page 276 2-4. Using other driving systems CAUTION ■ Before driving To avoid an accident, observe the precautions relating to off-road driving. (→P. 262) ■ When using Multi-terrain Select ● Do not use the Multi-terrain Select system for normal (on-road) driving. The Multi-terrain Select system is designed for off-road use only. ●...
Page 277: Driving Assist Systems
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■...
Page 278 2-4. Using other driving systems ■ KDSS (Kinetic Dynamic Suspension System) (if equipped) Enhances ride comfort and handling response by using a hydraulic control system to control the suspension stabilizer bars in response to road surface and driving conditions during cornering or off-road driving When the VSC/TRAC systems are operating (2WD models) If the vehicle is in danger of slip- ping or if any of the drive wheels...
Page 279 2-4. Using other driving systems Disabling the TRAC/VSC systems (2WD models) If the vehicle gets stuck in fresh snow or mud, the TRAC/VSC sys- tems may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order to free it.
Page 280 2-4. Using other driving systems ■ Turning off both TRAC and VSC systems To turn the TRAC and VSC sys- tems off, press and hold the but- ton for more than 3 seconds while the vehicle is stopped. The “TRAC OFF” and VSC off indicators will come on.
Page 281 2-4. Using other driving systems Disabling the TRAC (TRC)/VSC systems (4WD models) If the vehicle gets stuck in fresh snow or mud, the TRAC (TRC)/VSC systems may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order to free it.
Page 282 2-4. Using other driving systems ■ Turning off both TRAC (TRC) and VSC systems To turn the TRAC (TRC) and VSC systems off, press and hold the button for more than 3 sec- onds while vehicle stopped. The “TRAC OFF (TRC OFF)” and VSC off indicators will come on.
Page 283 2-4. Using other driving systems ■ Hill-start assist control operation conditions ● The shift lever is in D or S. ● The brake pedal is not depressed. ● The rear differential is unlocked (if equipped). ■ If the brake system overheats The hill-start assist control will cease operation and a buzzer will sound to alert the driver.
Page 284 2-4. Using other driving systems ■ Reactivation of the TRAC (TRC)/VSC systems (4WD models) If the TRAC (TRC)/VSC systems are turned off, the systems will not turn on even when vehicle speed increases. CAUTION ■ The ABS and Multi Terrain ABS do not operate effectively when ●...
Page 285 The ABS, Multi Terrain ABS and VSC will not function correctly if different tires are fitted on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and the suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause a system to malfunction.
Page 286: 2-5. Driving Information
2-5. Driving information Off-road precautions This vehicle belongs to the utility vehicle class, which has higher ground clearance and narrower tread in relation to the height of its center of gravity to make it capable of performing in a wide variety of off-road applications.
Page 287 2-5. Driving information CAUTION ■ Off-road vehicle precautions Always observe the following precautions to minimize the risk of death, seri- ous injury or damage to your vehicle: ● In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt.
Page 288 2-5. Driving information Off-road driving When driving your vehicle off-road, please observe the following pre- cautions to ensure your driving enjoyment and to help prevent the closure of areas to off-road vehicles: ● Drive your vehicle only in areas where off-road vehicles are permit- ted to travel.
Page 289 2-5. Driving information CAUTION ■ Off-road driving precautions Always observe the following precautions to minimize the risk of death, seri- ous injury or damage to your vehicle: ● Drive carefully when off the road. Do not take unnecessary risks by driving in dangerous places.
Page 290 2-5. Driving information NOTICE ■ To prevent water damage Take all necessary safety measures to ensure that water damage to the engine or other components does not occur. ● Water entering the engine air intake will cause severe engine damage. ●...
Page 291: Cargo And Luggage
2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load: ● Stow cargo and luggage in the luggage compartment whenever possible. ● Be sure all items are secured in place. ●...
Page 292 2-5. Driving information Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) — (Total weight of occupants) Steps for Determining Correct Load Limit— (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.”...
Page 293 2-5. Driving information Example on your vehicle Cargo capacity Total load capacity When 2 people with the combined weight of 366 lb. (166 kg) are riding in your vehicle, the available amount of cargo and luggage load capacity will be as follows: Without third seats Total load capacity: 825 lb.
Page 294 2-5. Driving information CAUTION ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart- ment: ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions. Failure to do so may result in death or serious injury.
Page 295 Roof luggage carrier precautions To use the roof rails as a roof luggage carrier, you must fit the roof rails with two or more genuine Toyota cross rails or their equivalent. When you load cargo on the roof luggage carrier, observe the following: ●...
Page 296 2-5. Driving information NOTICE ■ When loading cargo Be careful not to scratch the surface of the moon roof. I n f o r ma t i o n P r o v i d e d b y :...
Page 297: Vehicle Load Limits
2-5. Driving information Vehicle load limits Vehicle load limits include total load capacity, seating capacity, towing capacity and cargo capacity. ■ Total load capacity Vehicles without third seats: 825 lb. (370 kg) Vehicles with third seats: 1155 lb. (520 kg) Total load capacity means the combined weight of occupants, cargo and luggage.
Page 298 2-5. Driving information CAUTION ■ Overloading the vehicle Do not overload the vehicle. It may not only cause damage to the tires, but also degrade steering and braking ability, resulting in an accident. I n f o r ma t i o n P r o v i d e d b y :...
Page 299: Winter Driving Tips
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 300 2-5. Driving information ■ Before driving the vehicle Perform the following according to the driving conditions. ● Do not try to forcibly open a window or move a wiper that is frozen. Pour warm water over the frozen area to melt the ice. Wipe away the water immediately to prevent it from freezing.
Page 301 2-5. Driving information Selection tire chains Use the correct tire chain size when mounting the tire chains. Chain size is regulated for each tire size. Side chain (0.20 in. [5 mm] in diameter) Cross chain (0.20 in. [5 mm] in diameter) CTH25AS009 Regulations on the use of tire chains Regulations regarding the use of tire chains vary depending on loca-...
Page 302 2-5. Driving information CAUTION ■ Driving with snow tires Observe the following precautions to reduce the risk of accidents. Failure to do so may result in a loss of vehicle control and cause death or serious injury. ● Use tires of the size specified. ●...
Page 303 NOTICE ■ Repairing or replacing snow tires Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 304: Trailer Towing
The vehicle stability and braking performance are affected by trailer stability, brake setting and performance, and the hitch. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Contact your Toyota dealer for further information about additional requirements such as a towing kit, etc.
Page 305 2-5. Driving information Weight limits Confirm that the gross trailer weight, gross combination weight, gross vehicle weight, gross axle weight and trailer tongue load are all within the limits. Driving Towing Engine GCWR system capacity 2.7 L 4-cylinder 2000 lb. 7900 lb.
Page 306 2-5. Driving information Towing related terms Towing related term Meaning The maximum allowable gross vehicle weight. The gross vehicle weight is the total weight of the vehicle. When towing GVWR (Gross Vehicle Weight a trailer, it is the sum of the vehicle Rating) weight (including the occupants, cargo and any optional equipment installed on...
Page 307 2-5. Driving information Trailer tongue load ● A recommended tongue load varies in accordance with the types of trailers or towing as described below. ● In order to ensure the recommended values shown below, the trailer must be loaded by referring to the following instructions. The trailer cargo load should be distributed so that the tongue load is 9 to 11% of the gross trailer weight, not exceeding 500 lb.
Page 308 2-5. Driving information Hitch and tow hitch receiver ■ Hitch Trailer hitch assemblies have different weight capacities estab- lished by the hitch manufacturer. Even though the vehicle may be rated for towing a higher weight, the operator must never exceed the maximum weight rating specified for the trailer hitch.
Page 309 2-5. Driving information Selecting a trailer ball Use the correct trailer ball for your application. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Ball diameter Matches the size of the trailer coupler. Most couplers stamped with the required trailer ball size.
Page 310 2-5. Driving information Trailer towing tips Your vehicle will handle differently when towing a trailer. The 3 main causes of vehicle-trailer accidents are driver error, excessive speed and improper trailer loading. Keep the following in mind when towing. ● Before starting out, check the trailer lights and the vehicle-trailer connections.
Page 311 2-5. Driving information ● Note that when making a turn, the trailer wheels will be closer than the vehicle wheels to the inside of the turn. Compensate by making a larger than normal turning radius. ● Crosswinds and rough roads will adversely affect handling of your vehicle and trailer, causing sway.
Page 312 2-5. Driving information ● Always place wheel blocks under both the vehicle and the trailer wheels when parking. Apply the parking brake firmly, and put the transmission in P. Avoid parking on a slope, but if unavoidable, do so only after performing the following: Apply the brakes and keep them applied.
Page 313 Break-in schedule If your vehicle is new or equipped with any new power train components (such as an engine, transmission, differential and wheel bearing), Toyota recommends that you do not tow a trailer until it has been driven for over 500 miles (800 km).
Page 314 2-5. Driving information ■ Maintenance ● If you tow a trailer, your vehicle will require more frequent maintenance due to the additional load. (See “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”.) ● Retighten the fixing bolts of the towing ball and bracket after approxi- mately 600 miles (1000 km) of trailer towing.
Page 315 2-5. Driving information CAUTION ■ Hitches ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross trailer weight requirement. ● Follow the directions supplied by the hitch manufacturer.
Page 316 ■ When installing a trailer hitch ● Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. ● Do not use axle-mounted hitches, as they can cause damage to the axle housing, wheel bearings, wheels or tires.
Page 317: Dinghy Towing
2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground. I n f o r ma t i o n P r o v i d e d b y :...
Page 318: 3-1. Using The Air Conditioning System And Defogger
3-1. Using the air conditioning system and defogger ∗ Manual air conditioning system Outside/recirculated air mode button Air outlet selector knob Cooling and dehumidification function on/off button Fan speed control knob Temperature control knob Adjusting the settings ■ Basic setting To turn on the air conditioning system and adjust the fan STEP speed, turn the fan speed control knob clockwise (increase) or...
Page 319 3-1. Using the air conditioning system and defogger To adjust the temperature setting, turn the temperature control STEP knob clockwise (warm) or counterclockwise (cool). is not pressed, the system will blow ambient temperature air or heated air. For quick cooling, turn the temperature control knob to “MAX A/C”. The air conditioning will automatically turn on and, if an air outlet position other than is selected, the system will be...
Page 320 3-1. Using the air conditioning system and defogger Air flows to the feet. CTH31AS006 Air flows to the feet and the windshield defogger operates. The air intake is automatically switched to outside air mode. Pressing to turn the cool- ing and dehumidification function on clears the windshield and side CTH31AS007 windows faster.
Page 321 3-1. Using the air conditioning system and defogger ■ Switching between outside air and recirculated air modes Press The mode switches between outside air mode (introduces air from out- side the vehicle) (indicator off) and recirculated air mode (recycles air inside the vehicle) (indicator on) each time the button is pressed.
Page 322 There may be a problem in the air conditioning system if the indi- cator light continues to flash. Turn the air conditioning system off and have it inspected by your Toyota dealer. ■ When outside air temperature is below 32°F (0°C) The cooling and dehumidification function may not operate even when is pressed.
Page 323 3-1. Using the air conditioning system and defogger ■ Air conditioning odors ● During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents. ●...
Page 324: Automatic Air Conditioning System
3-1. Using the air conditioning system and defogger ∗ Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting. Driver's side temperature control dial Passenger’s side Cooling and dehumidification function on/off button temperature display Fan speed display Air outlet display Passenger’s side...
Page 325 3-1. Using the air conditioning system and defogger Using the automatic air conditioning system Press STEP The air conditioning system begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature set- ting. Turn clockwise to increases the temperature and turn STEP counterclockwise to decreases the temperature on the driver’s side.
Page 326 3-1. Using the air conditioning system and defogger Adjusting the settings manually ■ Basic setting To turn on the air conditioning system and adjust the fan STEP speed, press “>” on to increase the fan speed and “<” to decrease the fan speed. Press to turn the fan off.
Page 327 3-1. Using the air conditioning system and defogger Air flows to the upper body and feet. CTH31AS010 Air flows to the feet. CTH31AS011 Air flows to the feet and the windshield defogger operates. The air intake is automatically switched to outside air mode. CTH31AS012 I n f o r ma t i o n P r o v i d e d b y :...
Page 328 3-1. Using the air conditioning system and defogger ■ Switching between outside air and recirculated air modes Press The mode switches between outside air mode (the indicator is off) and recirculated air mode (the indicator is on) each time the button is pressed.
Page 329 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Front center outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent.
Page 330 3-1. Using the air conditioning system and defogger ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and ambient conditions. As a result, the following may occur: ● The system may switch automatically to recirculated air mode when the coolest temperature setting is selected when the ambient temperature is high.
Page 331 There may be a problem in the air conditioning system if the indi- cator light continues to flash. Turn the air conditioning system off and have it inspected by your Toyota dealer. ■ Air conditioning odors ●...
Page 332: Rear Window And Outside Rear View Mirror Defoggers
3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers Defoggers are used to defog the rear window, and to remove rain- drops, dew and frost from the outside rear view mirrors. Before operating the defoggers, make sure the back window is completely closed.
Page 333 3-1. Using the air conditioning system and defogger ■ The defoggers can be operated when ● Vehicles without a smart key system: The engine switch is in the “ON” position. Vehicles with a smart key system: The “ENGINE START STOP” switch is in IGNITION ON mode. ●...
Page 334: Windshield Wiper De-Icer
3-1. Using the air conditioning system and defogger ∗ Windshield wiper de-icer This feature is used to prevent ice from building up on the wind- shield and wiper blades. Turns the windshield wiper de- icer on/off The windshield wiper de-icer will automatically turn off after approximately 15 minutes.
Page 335: 3-2. Using The Audio System
3-2. Using the audio system Audio system types With a navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. Without a navigation system Type A: CD player with changer controller and AM/FM radio Type B: CD player with changer controller and AM/FM radio I n f o r ma t i o n P r o v i d e d b y :...
Page 336 3-2. Using the audio system Type C: CD player with changer and AM/FM radio Title Page Using the radio P. 317 Using the CD player P. 324 Playing MP3 and WMA discs P. 333 ® Operating an iPod P. 341 Operating a USB memory P.
Page 337 3-2. Using the audio system Language settings (type B and C) The language used for all voice guidance, voice recognition and mes- sages may be changed. Press STEP Press (MORE). STEP Press (LANG). STEP Press as corresponds to the desired lan- STEP guage.
Page 338 3-2. Using the audio system CAUTION ■ For vehicles sold in the U.S.A. and Canada ● Part 15 of the FCC Rules and RSS-Gen of the IC Rules FCC Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Page 339: Using The Radio
3-2. Using the audio system Using the radio Type A Adjusting the Power Volume frequency (AM, FM mode) Seeking a frequency or channel Station selector (SAT mode) Scanning for AM⋅SAT/FM Displaying radio Changing the receivable stations mode buttons text messages channel category Type B and C...
Page 340 3-2. Using the audio system ® Setting station presets (excluding XM Satellite Radio) Search for desired stations by turning STEP ∧ pressing “ ” or “∨” on Press and hold a button (from ) until you hear STEP a beep. Type B and C: Each time is pressed, station pages are changed.
Page 341 3-2. Using the audio system ® Satellite Radio (if equipped) ® ■ Receiving XM Satellite Radio Press STEP The display changes as follows each time pressed. Type A: AM → SAT1 → SAT2 → SAT3 Type B and C: AM → FM → SAT Turn to select the desired channel in all the STEP...
Page 342 3-2. Using the audio system ® ■ Scanning XM Satellite Radio channels ● Scanning channels in the current category Press STEP When the desired channel is reached, press STEP again. ● Scanning the preset channels Press and hold until you hear a beep. STEP When the desired channel is reached, press STEP...
Page 343 3-2. Using the audio system ■ When the battery is disconnected All preset stations are erased. (type A only) ■ Reception sensitivity Type B and C ⎯ Cargo loaded on the roof luggage carrier, especially ● ® metal objects, may adversely affect the reception of XM Satellite Radio.
Page 344 ANTENNA securely. CHECK There is a short-circuit in the antenna or the sur- ANTENNA rounding antenna cable. See a Toyota certified dealer. ® You have not subscribed to XM Satellite Radio. The radio is being updated with the latest encryp- ®...
Page 345 3-2. Using the audio system The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to CHANNEL NOT the previous channel or “CH001”. If it does not AVAILABLE change automatically, select another channel. ®...
Page 346: Using The Cd Player
3-2. Using the audio system Using the CD player Type A Power Volume Displaying text messages CD eject Selecting a track Rewinding Selecting a track Repeat play Fast-forwarding Random playback Playback Searching playback Type B and C Power Volume Displaying text messages CD eject Selecting a track CD load...
Page 347 3-2. Using the audio system Loading CDs ■ Loading a CD (type A and B) Insert a CD. ■ Loading a CD (type C) Press STEP When the indicator on the slot turns from amber to green, STEP insert a CD. ■...
Page 348 3-2. Using the audio system Ejecting CDs ■ Ejecting a CD (type A and B) Press and remove the CD. ■ Ejecting a CD (type C) To select the CD to be ejected, press ) or STEP The selected CD number is shown on the display. Press and remove the CD.
Page 349 3-2. Using the audio system Scanning tracks Press STEP The first ten seconds of each track will be played. To cancel, press again. Press again when the desired track is reached. STEP Selecting a CD (type C only) ■ Selecting a CD to play Press ) or ■...
Page 350 3-2. Using the audio system Random playback ■ Current CD Press (RAND) or (RDM). Songs are played in random order. To cancel, press the button once more (type A and B), or twice more (type C). ■ All CDs (type C only) Press (RDM) twice.
Page 351 3-2. Using the audio system Switching the display Press Each time is pressed, the display changes in the following order: Type A: Track no./Elapsed time → CD title → Track name. Type B and C: Track title → Track name/Artist name → Track name/ Elapsed time.
Page 352 “WAIT” or “PLEASE WAIT”: Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played back. ■ Discs that can be used Discs with the marks shown below can be used.
Page 353 3-2. Using the audio system NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual Discs. Doing so may damage the CD player and/or the CD insert/eject function. ●...
Page 354 3-2. Using the audio system NOTICE ■ CD player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ●...
Page 355: Playing Mp3 And Wma Discs
3-2. Using the audio system Playing MP3 and WMA discs Type A Selecting a file Power Volume CD eject Selecting a folder and files Selecting a file Fast-forwarding Searching Displaying text Repeat play playback messages Rewinding Random playback Playback Type B and C Selecting a file Power Volume...
Page 356 3-2. Using the audio system Loading and ejecting MP3 and WMA discs →P. 325 Selecting MP3 and WMA discs (type C only) →P. 326 Selecting and scanning a folder ■ Selecting folders one at a time Press “∧” or “∨” on to select the desired folder.
Page 357 3-2. Using the audio system ■ Selecting the desired file by cueing the files in the folder Press When the desired file is reached, press once again. Fast-forwarding and rewinding files Type A: Press ) or ∧ ” or “∨” on Type B and C: Press and hold “...
Page 358 3-2. Using the audio system Repeat play ■ Repeating a file Press (RPT) or (RPT). To cancel, press the button once more (type A and B), or twice more (type C). ■ Repeating all of the files in a folder Type A: Press and hold (RPT) until you hear a beep.
Page 359 “WAIT” or “PLEASE WAIT”: Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played. ■ Discs that can be used →P.
Page 360 3-2. Using the audio system ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 361 3-2. Using the audio system ● Compatible media Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible if the CD-R or CD-RW is not finalized. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.
Page 362 3-2. Using the audio system ● MP3 and WMA playback When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played.
Page 363: Operating An Ipod
3-2. Using the audio system ®∗ Operating an iPod ® Connecting an iPod enables you to enjoy music from the vehicle speakers. ® ■ Connecting an iPod Open the glove box and con- STEP ® ® nect an iPod using an iPod cable.
Page 364: Control Panel
3-2. Using the audio system ■ Control panel Power Volume Selecting a track/ fast-forwarding Selector knob and rewinding Selector buttons Displaying text Playback/pause messages Playback I n f o r ma t i o n P r o v i d e d b y :...
Page 365 3-2. Using the audio system Selecting a play mode ® Press (BROWSE) to select iPod menu mode. STEP Press as corresponds to the STEP desired play mode. Pressing (MORE) to change to the second selection list. ■ Play mode list First Second Third...
Page 366 3-2. Using the audio system ■ Selecting a list Turn to display the first selection list. STEP Press to select the desired item. STEP Repeat the same procedure to select the desired song name. STEP To return to the previous selection list, press Selecting songs from a song list Press (LIST).
Page 367 3-2. Using the audio system Selecting songs Turn or press “∧” or “∨” on to select the desired song. Playing and pausing songs Press Fast-forwarding and rewinding songs ∧ Press and hold “ ” or “∨” on Shuffle playback ■ Playing songs from one playlist or album in random order Press (RDM).
Page 368 3-2. Using the audio system Switching the display Press Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time ® ■ About iPod ® iPod is a registered trademark of Apple computer, Inc.
Page 369 3-2. Using the audio system ■ Compatible models ® ● iPod 5th generation Version 1.2 or later ® ● iPod nano 3rd generation Version 1.0 or later ® ● iPod nano 2nd generation Version 1.1.2 or later ® ● iPod nano Version 1.3 or later ®...
Page 370: Operating A Usb Memory
3-2. Using the audio system ∗ Operating a USB memory Connecting a USB memory enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory Open the glove box and con- STEP nect a USB memory. CTH32AS024 Press STEP ∗...
Page 371 3-2. Using the audio system ■ Control panel Selector knob Power Volume Selecting a track/ fast-forwarding Selecting a and rewinding folder and file Selector buttons Searching Displaying text playback Playback/pause messages Playback Selecting and scanning a folder ■ Selecting a folder Press “∧”...
Page 372 3-2. Using the audio system Selecting and scanning files ■ Selecting a file Turn or press “∧” or “∨” on to select the desired file. ■ Scanning the files in a folder Press The first ten seconds of each file will be played. To cancel, press again.
Page 373 3-2. Using the audio system Repeat play ■ Repeating a file Press (RPT). To cancel, press the button twice. ■ Repeating all the files in a folder Press (RPT) twice. To cancel, press the button again. Switching the display Press Each time is pressed, the display changes in the following order:...
Page 374 3-2. Using the audio system ■ USB memory ● Compatible device USB memory that can be used for MP3 and WMA playback. Depending on the type of USB device, playback may not be possible. ● Compatible device formats The following device formats can be used: •...
Page 375 3-2. Using the audio system ● MP3 file compatibility • Compatible standards MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III, MPEG2.5) • Compatible sampling frequencies MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz) MPEG2.5: 8, 11.025, 12 (kHz) •...
Page 376 3-2. Using the audio system ● Extensions If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.
Page 377: Optimal Use Of The Audio System
3-2. Using the audio system Optimal use of the audio system Type A Adjusting the sound quality and ASL Type B and C Adjusting the sound quality and ASL Selector buttons Menu button I n f o r ma t i o n P r o v i d e d b y :...
Page 378 3-2. Using the audio system Using the audio control function ■ Changing sound quality modes Type A Pressing selects the mode to be changed in the following order: “BAS”→“TRE”→“FAD”→“BAL”→“ASL” Type B and C Press STEP Press (type C only) as STEP corresponds to the desired mode.
Page 379 3-2. Using the audio system Type B and C Mode Sound qual- Turn to the Turn to the Level displayed ity mode left right BASS Bass* -5 to 5 Mid-range* -5 to 5 High (type C only) TREB Treble* -5 to 5 Front/rear Shifts to FADE...
Page 380 3-2. Using the audio system Type B and C Press STEP Press (MORE). STEP Press (ASL). STEP Press (type B only) or (type B STEP only) as corresponds to the desired mode. Type B: “LOW”, “MID”, “HIGH”, or “OFF” Type C: “ON” or “OFF” ASL automatically adjusts the volume and tone quality according to vehicle speed.
Page 381 3-2. Using the audio system Party mode switch You can switch the sounds quality types by pressing the switch. Base mode Party mode In party mode, the sound volume from the speakers on the back door is bigger than in base mode. (The output from the speakers on the rear doors will be transferred to the back door speakers.)
Page 382: Using The Aux Adapter
3-2. Using the audio system Using the AUX adapter This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. Open the cover and connect STEP the portable audio device. CTH32AS023 Press STEP ■...
Page 383: Using The Steering Wheel Audio Switches
3-2. Using the audio system ∗ Using the steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Increases/decreases vol- Radio mode: Selects radio stations CD mode: Selects tracks, files (MP3 and WMA) and discs (type C only) ®...
Page 384 3-2. Using the audio system Turning the power on Press when the audio system is turned off. The audio system can be turned off by holding the switch down until you hear a beep. Changing the audio source Press when the audio system is turned on. The audio source changes as follows each time the switch is pressed.
Page 385 3-2. Using the audio system Selecting a track/file or song ® ® Press to select CD, iPod , USB memory or Bluetooth STEP audio mode. Press “∨” or “∧” on to select the desired track/file or STEP song. Selecting a folder or album ®...
Page 386: Using The Bluetooth
® 3-3. Using the Bluetooth audio system ® ∗ Bluetooth audio system ® The Bluetooth audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication. ® This audio system supports Bluetooth , a wireless data system capable of playing portable audio music without cables.
Page 387 ® 3-3. Using the Bluetooth audio system ■ When transferring ownership of the vehicle Be sure to initialize the system to prevent personal data from being improp- erly accessed. (→P. 403) ® ■ About Bluetooth Bluetooth is a registered trademark of Bluetooth SIG.
Page 388 ® 3-3. Using the Bluetooth audio system CAUTION ■ FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
Page 389 ® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio system ■ Audio unit Display Track title, Artist name, Album name, Elapsed time, “Streaming Audio”, etc. is displayed. Selects items such as menu and number Turn: Selects an item Press: Inputs the selected item Bluetooth-Audio...
Page 390 ® 3-3. Using the Bluetooth audio system Operating the system using voice commands By following voice guidance instructions output from the speaker, ® voice commands enable to the operation of the Bluetooth audio sys- tem without the need to check the display or operate ■...
Page 391: Enabled Portable Player
® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio system for the first time ® Before using the Bluetooth audio system, it is necessary to register ® a Bluetooth enabled portable player in the system. Follow the proce- dure below to register (pair) a portable player: Press and hold until “BT AUDIO”...
Page 392 ® 3-3. Using the Bluetooth audio system Input the passkey into the portable player. STEP Refer to the manual that comes with the portable player for the oper- ation of the portable player. Guidance for registration completion is heard. ® If the portable player has a Bluetooth phone, the phone can be reg- istered at the same time.
Page 393 ® 3-3. Using the Bluetooth audio system ■ When using a voice command For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly. ■ Situations that the system may not recognize your voice ●...
Page 394 ® 3-3. Using the Bluetooth audio system ® Operating a Bluetooth enabled portable player Power Volume Selector knob Fast-forwarding and reversing Selecting tracks Playback Displaying text messages Playback/pause Selecting an album Press “∨” or “∧” on Selecting tracks Press “∧” or “∨” on Playing and pausing tracks Press I n f o r ma t i o n P r o v i d e d b y :...
Page 395 ® 3-3. Using the Bluetooth audio system Fast-forwarding and reversing tracks ∧ Press and hold “ ” or “∨” on Switching the display Press Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time Using the steering wheel audio switches →P.
Page 396: Using The Bluetooth ® Audio System
® 3-3. Using the Bluetooth audio system ® Setting up a Bluetooth enabled portable player ® Registering a portable player in the Bluetooth audio system allows the system to function. The following functions can be used for reg- istered portable players: ■...
Page 397 ® 3-3. Using the Bluetooth audio system Registering a portable player Select “Pair Audio Players (Pair audio player)” using a voice com- mand or , and perform the procedure for registering a portable player. (→P. 369) Selecting a portable player to be used Select “Select Audio Player”...
Page 398 ® 3-3. Using the Bluetooth audio system Press the talk switch and say “From car” or “From audio”, and STEP select “Confirm” using a voice command or Vehicles with smart key system: If “From car” is selected, the porta- ble player will be automatically connected whenever the “ENGINE START STOP”...
Page 399 ® 3-3. Using the Bluetooth audio system Listing the registered portable players Select “List Audio Players” using a voice command or . The list of registered portable players will be read aloud. When listing is complete, the system returns to “BT Audio Setup”. Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available:...
Page 400 ® 3-3. Using the Bluetooth audio system Deleting a registered portable player Select “Delete Audio Player” using a voice command or STEP Select the portable player to be deleted by either of the follow- STEP ing methods and select “Confirm” using a voice command or a.
Page 401: Bluetooth ® Audio System Setup
® 3-3. Using the Bluetooth audio system ® Bluetooth audio system setup ■ System setup items and operation procedures →P. 401 I n f o r ma t i o n P r o v i d e d b y :...
Page 402 3-4. Using the hands-free phone system (for cellular phone) ∗ Hands-free phone system (for cellular phone) features ® This system supports Bluetooth , which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone.
Page 403: Using The Hands-Free
3-4. Using the hands-free phone system (for cellular phone) Title Page Using the hands-free phone system ■ Operating the system using a voice command ■ Using the hands-free phone system for P. 384 the first time ■ Menu list of the hands-free phone system Making a phone call ■...
Page 404 3-4. Using the hands-free phone system (for cellular phone) ■ Conditions under which the system will not operate ® ● If using a cellular phone that does not support Bluetooth ● If the cellular phone is switched off ● If you are outside service range ●...
Page 405 3-4. Using the hands-free phone system (for cellular phone) CAUTION ■ FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
Page 406: Hands-Free Phone System
3-4. Using the hands-free phone system (for cellular phone) Using the hands-free phone system (for cellular phone) ■ Audio unit Display A message, name, phone number, etc. is displayed. Lower-case characters and special characters, such as an umlaut, cannot be dis- played.
Page 407 3-4. Using the hands-free phone system (for cellular phone) ■ Steering wheel switches Volume The voice guidance volume cannot be adjusted using this button. On-hook switch Turns the hands-free sys- tem off/ends a call/refuses a call CTH32AS047 Off-hook switch Turns the hands-free sys- tem on/starts a call Talk switch Turns the voice command...
Page 408 3-4. Using the hands-free phone system (for cellular phone) Operating the system using a voice command By following voice guidance instructions output from the speaker, voice commands enable the operation of the hands-free phone sys- tem without the need to check the display or operate ■...
Page 409 3-4. Using the hands-free phone system (for cellular phone) Select “Pair Phone” using a voice command or STEP Register a phone name by either of the following methods. STEP a. Select “Record Name” using , and say a name to be registered.
Page 410 3-4. Using the hands-free phone system (for cellular phone) Menu list of the hands-free phone system ■ Normal operation Second First menu Third menu Operation detail menu CallBack Dialing a number stored in (Call the incoming call history back) memory Dialing a number stored in Redial the outgoing call history...
Page 411 3-4. Using the hands-free phone system (for cellular phone) Second First menu Third menu Operation detail menu Set PIN Setting a PIN code Phonebook Lock (Phone book Locking the phone book Security lock) Phonebook Unlock (Phone Unlocking the phone book book unlock) Registering the cellular Pair Phone...
Page 412 3-4. Using the hands-free phone system (for cellular phone) ■ Using a short cut key First menu Second menu Operation detail Dialing a number registered Dial “XXX (name)” in the phone book Dial “XXX (number)” Dialing the input numbers Phone book add Adding a new number entry Changing the name of a...
Page 413 3-4. Using the hands-free phone system (for cellular phone) ■ Automatic volume adjustment When vehicle speed reaches 50 mph (80 km/h) or more, the volume auto- matically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less. ■...
Page 414: Making A Phone Call
3-4. Using the hands-free phone system (for cellular phone) Making a phone call ■ Making a phone call ● Dialing by inputting a number “Dial by Number” ● Dialing by inputting a name “Dial by Name (Dial by name)” ● Speed dialing ●...
Page 415 3-4. Using the hands-free phone system (for cellular phone) Dialing by inputting a name Press the talk switch and say “Dial by name”. STEP Select a registered name to be input by either of the following STEP methods: a. Press the talk switch and say a registered name. b.
Page 416 3-4. Using the hands-free phone system (for cellular phone) Transferring a phone call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow- ing methods: a.
Page 417 3-4. Using the hands-free phone system (for cellular phone) The following operations can be performed: Dialing: Press the off-hook switch or select “Dial” using a voice command or Storing the number in the phone book: Select “Store” using a voice command or Deleting: Select “Delete”...
Page 418: Setting A Cellular Phone
3-4. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: ■ Functions and operation procedures To enter the menu for each function, follow the steps below using a voice command or ●...
Page 419 3-4. Using the hands-free phone system (for cellular phone) Selecting the cellular phone to be used Select “Select Phone” using a voice command or STEP Pattern A Select the cellular phone to be used by either of the following STEP methods, and select “Confirm”...
Page 420 3-4. Using the hands-free phone system (for cellular phone) c. Select the desired phone name using Press the talk switch or select “Record Name” using STEP and say a new name. Select “Confirm” using a voice command or STEP Listing the registered cellular phones Selecting “List Phones”...
Page 421 3-4. Using the hands-free phone system (for cellular phone) Deleting a cellular phone Select “Delete Phone” using a voice command or STEP Select the cellular phone to be deleted by either of the follow- STEP ing methods and select “Confirm” using a voice command or a.
Page 422 3-4. Using the hands-free phone system (for cellular phone) Turning the hands-free phone automatic connection on/off ■ Turning off the automatic connection Select “Handsfree Power” using a voice command or STEP Select “Turn off” using a voice command or STEP ■...
Page 423: Security And System Setup
3-4. Using the hands-free phone system (for cellular phone) Security and system setup To enter the menu of each setting, follow the steps below: ■ Security setting items and operation procedure ● Setting or changing the PIN (Personal Identification Number) 1.
Page 424 3-4. Using the hands-free phone system (for cellular phone) Enter a PIN using a voice command or STEP When using , input the code 1 digit at a time. ■ Changing the PIN Select “Set PIN” using a voice command or STEP Enter the registered PIN using a voice command or STEP...
Page 425 3-4. Using the hands-free phone system (for cellular phone) Setting voice guidance volume Select “Guidance Volume” using STEP Change the voice guidance volume. STEP To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Initialization Select “Reset Settings” and then “Confirm” using STEP Select “Confirm”...
Page 426 3-4. Using the hands-free phone system (for cellular phone) ■ Initialization ● The following data in the system can be initialized: • Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code ●...
Page 427: Using The Phone Book
3-4. Using the hands-free phone system (for cellular phone) Using the phone book To enter the menu of each setting, follow the steps below: ● Adding a new phone number 1. “Phonebook” → 2. “Add Entry” ● Setting speed dial 1.
Page 428 3-4. Using the hands-free phone system (for cellular phone) ■ Adding procedure Select “Add Entry” using a voice command or STEP Use one of the following methods to input a telephone num- STEP ber: Inputting a telephone number using a voice command STEP2-1 Select “By Voice (By voice)”...
Page 429 3-4. Using the hands-free phone system (for cellular phone) Inputting a phone number using STEP2-1 Select “Manual Input” using STEP2-2 Input a phone number using , and press once again. Input the phone number 1 digit at a time. Selecting a phone number from outgoing or incoming call his- tory STEP2-1 Select “Call History”...
Page 430 3-4. Using the hands-free phone system (for cellular phone) Select the name to be registered by either of the following STEP methods, and select “Confirm” using a voice command or a. Press the talk switch and say the desired name. b.
Page 431 3-4. Using the hands-free phone system (for cellular phone) Setting speed dials Select “Speed Dial (Set speed dial)” using a voice command STEP Select the data to be registered as a speed dial by either of STEP the following methods: a.
Page 432 3-4. Using the hands-free phone system (for cellular phone) Changing a registered name Select “Change Name” using a voice command or STEP Select the name to be changed by either of the following STEP methods. a. Press the talk switch, say desired name, and select “Con- firm”...
Page 433 3-4. Using the hands-free phone system (for cellular phone) Deleting registered data Select “Delete Entry” using a voice command or STEP Select the data to be deleted by either of the following meth- STEP ods, and select “Confirm” using a voice command or a.
Page 434 3-4. Using the hands-free phone system (for cellular phone) Listing the registered data Selecting “List names” using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”. Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will be available.
Page 435: 3-5. Using The Interior Lights
3-5. Using the interior lights Interior lights list CTH35AS003 Rear interior light (→P. 414) Front personal lights/front interior light (→P. 414) Shift lever light (when the engine switch is in the “ACC” or “ON” position [without a smart key system] or “ENGINE START STOP”...
Page 436: Interior Lights
3-5. Using the interior lights Interior lights and personal lights Interior lights Front Turns the lights off Turns the door position on CTH36AS022 Rear Turns the door position on Turns the light off Turns the light on CTH36AS024 Personal lights Turns the lights on/off CTH36AS034 I n f o r ma t i o n P r o v i d e d b y :...
Page 437 Footwell lights ● Inside door handle lights ■ Customization that can be configured at Toyota dealer Settings (e.g. the time elapsed before lights turn off) can be changed. → P. 638) (Customizable features I n f o r ma t i o n P r o v i d e d b y :...
Page 438: 3-6. Using The Storage Features
3-6. Using the storage features List of storage features CTH36AS036 Auxiliary box Glove box Bottle holders Tissue pocket Cup holders Pen holder Console box Coin holder I n f o r ma t i o n P r o v i d e d b y :...
Page 439: Glove Box
3-6. Using the storage features Glove box Glove box The glove box can be opened by pressing the lock release button and can be locked and unlocked by using the master key (vehicles without a smart key system) or the mechanical key (vehicles with a smart key system).
Page 440: Console Box
3-6. Using the storage features Console box Console box Lift the lid while pulling up the knob to release the lock. CTH36AS011 ■ The separator can be used in either of the positions shown in the illus- tration Change the separator position. CTH36AS012 CAUTION ■...
Page 441: Coin Holder
3-6. Using the storage features Coin holder Coin holder Lift the lid while pulling up the knob to release the lock. CTH36AS013 CAUTION ■ Caution while driving Keep the console box closed. In the event of sudden braking, an accident may occur due to an occupant being struck by the open console box or the items stored inside.
Page 442: Tissue Pocket
3-6. Using the storage features Tissue pocket Tissue pocket Lift the lid while pulling up the knob to release the lock. CTH36AS014 CAUTION ■ Caution while driving Keep the console box closed. In the event of sudden braking, an accident may occur due to an occupant being struck by the open console box or the items stored inside.
Page 443: Pen Holder
3-6. Using the storage features Pen holder Pen holder Lift the lid while pulling up the knob to release the lock. CTH36AS015 CAUTION ■ Caution while driving Keep the console box closed. In the event of sudden braking, an accident may occur due to an occupant being struck by the open console box or the items stored inside.
Page 444: Auxiliary Box
3-6. Using the storage features Auxiliary box Auxiliary box Push the lid. CTH36AS016 CAUTION ■ Items that should not be left in the auxiliary box Do not leave glasses or lighters in the box. If the interior of the vehicle becomes hot, lighters may explode and glasses may warp or crack.
Page 445: Cup Holders
3-6. Using the storage features Cup holders Cup holders Front seats (standard type transmission) CTH36AS038 Front seats (multi-mode type transmission) CTH36AS009 Rear seats (without third row seats) Pull down the rear seat center armrest. CTH36AS005 I n f o r ma t i o n P r o v i d e d b y :...
Page 446 3-6. Using the storage features Cup holders Second row seats (with third row seats) Pull down the second row seat center armrest and press down the button on the armrest. CTH36AS006 Third row seats (if equipped) CTH36AS020 I n f o r ma t i o n P r o v i d e d b y :...
Page 447 3-6. Using the storage features Cup holders ■ Adjusting the size of the cup holders Front seats (standard type transmission) Remove the adapter. CTH36AS039 Front seats (multi-mode type transmission) Remove the adapter. CTH36AS010 Rear seats (without third row seats) Remove the adapter. CTH36AS031 I n f o r ma t i o n P r o v i d e d b y :...
Page 448 3-6. Using the storage features Cup holders CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or beverage cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking, causing injury.
Page 449: Bottle Holders
3-6. Using the storage features Bottle holders Bottle holders Front seats CTH36AS018 Rear seats (without third row seats)/Second row seats (with third row seats) CTH36AS019 ■ When using the bottle holder ● When storing a bottle, close the cap. ● The bottle may not be stored depending on its size or shape.
Page 450 3-6. Using the storage features Bottle holders NOTICE ■ Items that should not be stowed in the bottle holders Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders, or glasses and paper cups containing liquid. The contents may spill and glasses may break.
Page 451: 3-7. Other Interior Features
3-7. Other interior features Sun visors To set the visor in the for- ward position, flip it down. To set the visor in the side position, flip down, unhook, and swing it to the side. To use the side extender, place the visor in the side position, then slide it back- CTH37AS007...
Page 452: Vanity Mirrors
3-7. Other interior features Vanity mirrors Slide the cover to open. The light turns on when the cover is opened. CTH37AS008 NOTICE ■ To prevent battery discharge Do not leave the vanity lights on for extended periods while the engine is off. I n f o r ma t i o n P r o v i d e d b y :...
Page 453: Clock
3-7. Other interior features Clock Adjusts the hours Adjusts the minutes I n f o r ma t i o n P r o v i d e d b y :...
Page 454 3-7. Other interior features ■ For quicker adjustment of the clock To advance the minutes and hours quickly, press and hold the “M” or “H” but- ton. The time can be adjusted back or forth by following the procedure below: The hour or minute can be moved for- ward or backward by pressing the “MODE/...
Page 455: Outside Temperature Display
3-7. Other interior features Outside temperature display The temperature display shows temperatures within the ranges of -40°F (-40°C) and 122°F (50°C). Vehicles without Multi-terrain Select I n f o r ma t i o n P r o v i d e d b y :...
Page 456 3-7. Other interior features Vehicles with Multi-terrain Select ■ The outside temperature is displayed when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. I n f o r ma t i o n P r o v i d e d b y :...
Page 457 3-7. Other interior features ■ ICE indicator Vehicles without Multi-terrain Select If the outside temperature lowers to 37 °F (3 °C) or below when the engine switch is in the “ON” position (vehicles without a smart key system) or the “ENGINE START STOP”...
Page 458: Power Outlets (12V Dc)
3-7. Other interior features Power outlets (12V DC) The power outlet can be used for 12 V accessories that run on less than 10 A. Center panel CTH37AS006 I n f o r ma t i o n P r o v i d e d b y :...
Page 459 3-7. Other interior features Glove box CTH37AS019 Luggage compartment (vehicles without the 120V AC) CTH37AS020 I n f o r ma t i o n P r o v i d e d b y :...
Page 460 3-7. Other interior features Luggage compartment (vehicles with the 120V AC) CTH37AS021 ■ The power outlet can be used when Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The “ENGINE START STOP”...
Page 461: Power Outlets (120V Ac)
3-7. Other interior features ∗ Power outlets (120V AC) The power outlet can be used for electrical appliances. Main switch To use the power outlet, turn on the main switch. The power supply starts a few seconds after the main switch is pressed.
Page 462 3-7. Other interior features Power outlet socket (luggage compartment) CTH37AS024 Maximum available capacity of the power outlet ■ While the vehicle is being driven The maximum capacity of the power outlet is always 120V AC/ 100W. ■ When the vehicle is stationary The maximum capacity of the power outlet varies depending on the position of the shift lever.
Page 463 3-7. Other interior features ■ The power outlet can be used when The engine is running. ■ The indicator light changes according to the maximum available capacity as follows: 120V AC/400W 120V AC/100W CTH37AS025 ■ When the power outlet is in operation The sound of the cooling fan may be heard from the right side of the luggage compartment.
Page 464 If the power supply does not resume even after the above procedure has been performed, have the vehicle inspected by your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 465 Do not modify, disassemble or repair the power outlet or its inverter in any way. Doing so may result in unexpected malfunctions or accidents, which could cause serious damage or injuries. Contact your Toyota dealer for any necessary repairs. ■...
Page 466 3-7. Other interior features NOTICE ■ To avoid damaging the power outlet and the plug ● Close the power outlet lid when not in use. ● Do not allow foreign objects or liquids to enter the power outlet, as this may cause a short circuit.
Page 467 ■ If the power outlet is loose when an electrical appliance plug is con- nected Replace the outlet. Contact your Toyota dealer for any necessary replace- ments. ■ If the power outlet gets dirty Turn the main switch off and use a soft, clean cloth to wipe it gently.
Page 468: Seat Heaters
3-7. Other interior features ∗ Seat heaters Front passenger’s The indicator light comes on. seat Adjusts the seat tempera- ture The further you move the dial forward, the warmer the seat becomes. Driver’s seat CTH37AS005 ■ The seat heaters can be used when Vehicles without a smart key system The engine switch is in the “ON”...
Page 469 3-7. Other interior features CAUTION ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the physically chal- lenged •...
Page 470: Armrest
3-7. Other interior features Armrest Fold down the armrest for use. CTH37AS056 NOTICE ■ To prevent damage to the armrest Do not apply too much load on the armrest. I n f o r ma t i o n P r o v i d e d b y :...
Page 471: Floor Mat
3-7. Other interior features Floor mat Securely place a mat that matches the size of the space onto the car- pet. Secure the driver’s floor mat using the hooks provided. CTH37AS074 CAUTION ■ When inserting the floor mat Observe the following precautions. Failure to do so may result in the floor mat slipping and interfering with the movement of the pedals during driving, resulting in an accident.
Page 472: Compass
3-7. Other interior features Compass The compass on the accessory meter display indicates the direction in which the vehicle is heading. “MODE/ ” button “SET/ ” button Direction display ■ Displays and directions Display Direction “N” North “NE” Northeast “E” East “SE”...
Page 473 3-7. Other interior features Calibrating the compass Samoa: 5 Guam: 8 Saipan: 8 CTH37AS072 The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies depending on the geographic position of the vehicle. If you cross over one of the map boundaries shown in illustration, the compass will deviate.
Page 474 3-7. Other interior features Deviation calibration Stop the vehicle. STEP Change the accessory meter display to deviation calibration STEP mode by doing the following. Vehicles without Multi-terrain Select When the parking lights are turned on: Press and hold the “MODE/ ”...
Page 475 3-7. Other interior features Referring to the map above, press the “MODE/ ” or “SET/ STEP ” button to select the number of the zone you are in. Press and hold the “SET/ ” button to confirm the number STEP and to exit deviation calibration mode.
Page 476 3-7. Other interior features Press and hold the “SET/ ” button to confirm the direction STEP and to exit circling calibration mode. (If no buttons are pressed for several minutes, the direction will automatically be confirmed and the display returned to normal.) Make sure that “•”...
Page 477 3-7. Other interior features CAUTION ■ While driving the vehicle Do not adjust the display. Adjust the display only when the vehicle is stopped. ■ When doing the circling calibration Secure a wide space, and watch out for people and vehicles in the vicinity. Do not violate any local traffic rules while performing circling calibration.
Page 478: Luggage Compartment Features
3-7. Other interior features Luggage compartment features ■ Cargo hooks Vehicles with third seats Fold down the third seats. (→P. 72) STEP Raise the hook to use. STEP The cargo hooks are provided for securing loose items. CTH37AS041 Vehicles without third seats Raise the hook to use.
Page 479 3-7. Other interior features ■ Cargo net hooks The cargo net itself is not included as original equipment. Vehicles with third seats (pattern 1) Raise the rear cargo hook to use. CTH37AS075 Vehicles with third seats (pattern 2) Fold down the third seats. (→P. 72) STEP Raise the cargo hook to use.
Page 480: Storage Compartment
3-7. Other interior features Vehicles without third seats (pattern 2) Raise the cargo hook to use. CTH37AS046 ■ Storage compartment Type A (if equipped) Open the storage compart- ment as shown. CTH37AS014 Type B (if equipped) Open the storage compart- ment as shown.
Page 481 3-7. Other interior features ■ Slide deck (if equipped) Slide the deck while turning the lock release lever, and then release the lever after sliding the deck to the lock position. Half-slide locked position Full-slide locked position CTH37AS048 ■ Grocery bag hooks Type A CTH37AS049 I n f o r ma t i o n P r o v i d e d b y :...
Page 482 3-7. Other interior features Type B (if equipped) To use the grocery bag hooks, slide the slide deck to the full- slide locked position. (→P. 459) CTH37AS050 CAUTION ■ When the cargo hooks are not in use To avoid injury, always return the cargo hooks to their stowed positions. ■...
Page 483 3-7. Other interior features NOTICE ■ To prevent damage to the cargo net hooks Avoid hanging things other than a cargo net on them. ■ Slide deck weight capacity (if equipped) Do not load anything heavier than 440 lb. (200 kg) on the sliding deck. ■...
Page 484: Garage Door Opener
3-7. Other interior features Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices. ® The garage door opener (HomeLink Universal Transceiver) is manufac- ®...
Page 485 3-7. Other interior features ® ■ Programming HomeLink Point the remote control trans- STEP mitter for the device 1 to 3 in. (25 ® to 75 mm) from the HomeLink buttons. ® Keep the HomeLink indicator light in view while programming. Press and hold one of the STEP ®...
Page 486 3-7. Other interior features ® Test the HomeLink operation STEP by pressing the newly pro- grammed button. ® If a HomeLink button has been programmed for a garage door, check to see if the garage door opens and closes. If the garage door does not operate, see if your garage transmitter is of the rolling code type.
Page 487 3-7. Other interior features ■ Programming a rolling code system (for U.S. owners) If your device is rolling code equipped, follow the steps under the ® heading “Programming HomeLink ” before proceeding with the steps listed below. Locate the learn button on the ceiling mounted garage door STEP opener motor.
Page 488 HomeLink buttons. ■ Programming other devices To program other devices such as home security systems, home door locks and lighting, contact your Toyota dealer for assistance. ■ Reprogramming a button ® The individual HomeLink buttons cannot be erased but can be reprogrammed.
Page 489 3-7. Other interior features ® Operating HomeLink ® ® Press the appropriate HomeLink button. The HomeLink indicator light should come on. ® The HomeLink compatible transceiver in your vehicle continues to send a signal for up to 20 seconds as long as the button is pressed. ®...
Page 490 3-7. Other interior features ■ Certification for the garage door opener For vehicles sold in the U.S.A. FCC ID: CB2300NHL3 NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 491: Safety Connect
Telematics Subscription Service Agreement and its Terms and Conditions, as in effect and amended from time to time, a current copy of which is available at Toyota.com. All use of the Safety Con- nect service is subject to such then-applicable Terms and Condi- tions.
Page 492 Agreement and are enrolled, you can begin receiving services. A variety of subscription terms is available for purchase. Contact your Toyota dealer, call 1-800-331-4331, or push the “SOS” but- ton in your vehicle for further subscription details. I n f o r ma t i o n P r o v i d e d b y :...
Page 493 Safety Connect. ● Safety Connect is available beginning Fall 2009 on select Toyota models. Contact with the Safety Connect response center is dependent upon the telematics device being in operative condition, cellular connection avail- ability, and GPS satellite signal reception, which can limit the ability to reach the response center or receive emergency service support.
Page 494 ● Green indicator light flashing = Safety Connect call in process ● Red indicator light (except at vehicle start-up) = System malfunc- tion (contact your Toyota dealer) ● No indicator light (off) = Safety Connect service not active Safety Connect services ■...
Page 495 In addition to assisting law enforcement with recovery of a stolen vehicle, Safety-Connect-equipped vehicle location data may, under certain circumstances, be shared with third parties to locate your vehicle. Further information is available at Toyota.com. ■ Emergency Assistance Button (“SOS”) In the event of an emergency on the road, push the “SOS”...
Page 496 3-7. Other interior features Safety information for Safety Connect Important! Read this information before using Safety Connect. ■ Exposure to radio frequency signals The Safety Connect system installed in your vehicle is a low-power radio transmitter and receiver. It receives and also sends out radio frequency (RF) signals.
Page 497 3-7. Other interior features ■ License Licensed by QUALCOMM Incorporated under one or more of the following United States Patents and/or their counterparts in other nations: 4,901,307 5,490,165 5,056,109 5,504,773 5,101,501 5,506,865 5,109,390 5,511,073 5,228,054 5,535,239 5,267,261 5,544,196 5,267,262 5,568,483 5,337,338 5,600,754 5,414,796 5,657,420 5,416,797 5,659,569 5,710,784 5,778,338 ■...
Page 498 3-7. Other interior features I n f o r ma t i o n P r o v i d e d b y :...
Page 499: 4-1. Maintenance And Care
4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 500 4-1. Maintenance and care ■ Aluminum wheels (if equipped) Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint. ■...
Page 501 4-1. Maintenance and care NOTICE ■ To protect your vehicle’s painted surfaces Do not use organic cleaners such as benzene and gasoline. ■ Cleaning the exterior lights ● Wash carefully. Do not use organic substances or scrub with a hard brush. This may damage the surfaces of the lights.
Page 502: 4-1. Maintenance And Care
4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 503 4-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 504 4-1. Maintenance and care NOTICE ■ Cleaning detergents Do not use the following types of detergent, as they may discolor the vehicle interior or cause streaks or damage to painted surfaces: ● Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach.
Page 505: 4-2. Maintenance
It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 506 Continue to press and hold the button until the trip meter displays “000000”. ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.
Page 507 4-2. Maintenance CAUTION ■ If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible serious injury or death. ■ Handling of the battery ● Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm.
Page 508: General Maintenance
Booklet” “Owner’s Manual Supplement/Scheduled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items Check points Check the connections. Battery (→P.
Page 509 4-2. Maintenance Vehicle interior Items Check points • The accelerator pedal should Accelerator pedal move smoothly (without uneven pedal effort or catching). • When parked on a slope and the Automatic transmission “Park” shift lever is in P, is the vehicle mechanism securely stopped? •...
Page 510 4-2. Maintenance Items Check points • Does the parking brake pedal move smoothly? Parking brake • When parked on a slope and the parking brake is on, is the vehicle securely stopped? • Do the seat belts operate smoothly? Seat belts •...
Page 511 4-2. Maintenance Vehicle exterior Items Check points Doors • Do the doors operate smoothly? • Does the engine hood lock sys- Engine hood tem work properly? • There should not be any signs of Fluid leaks fluid leakage after the vehicle has been parked.
Page 512: Emission Inspection And Maintenance (I/M) Programs
If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. ■...
Page 513: 4-3. Do-It-Yourself Maintenance
Brake fluid level (→P. 505) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology For the U.S.A.:...
Page 514 4-3. Do-it-yourself maintenance Items Parts and tools • Fuse with same amperage rating Fuses (→P. 531) as original • Bulb with same number and watt- age rating as original Light bulbs (→P. 541) • Phillips-head screwdriver • Flathead screwdriver • Wrench •...
Page 515 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions: ■ When working on the engine compartment: ● Keep hands, clothing and tools away from the moving fan and engine drive belt.
Page 516: Hood
4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. STEP The hood will pop up slightly. CTH43AS009 Pull up the auxiliary catch STEP lever and lift the hood. CTH43AS087 CAUTION ■...
Page 517: Engine Compartment
4-3. Do-it-yourself maintenance Engine compartment 2.7 L 4-cylinder (2TR-FE) engine CTH43AS131 Washer fluid tank (→P. 512) Brake fluid reservoir (→P. 505) Engine coolant reservoir (→P. 503) Fuse box (→P. 531) Engine oil filler cap Battery (→P. 509) (→P. 498) Condenser (→P.
Page 518 4-3. Do-it-yourself maintenance 4.0 L V6 (1GR-FE) engine CTH43AS117 Washer fluid tank (→P. 512) Brake fluid reservoir (→P. 505) Power steering fluid reservoir (→P. 507) Fuse box (→P. 531) Engine oil level dipstick Battery (→P. 509) (→P. 498) Condenser (→P. 504) Engine coolant reservoir Radiator (→P.
Page 519 4-3. Do-it-yourself maintenance Engine compartment cover ■ Removing the engine compartment cover CTH43AS121 ■ Installing the clips CTH43AS018 I n f o r ma t i o n P r o v i d e d b y :...
Page 520 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil Park the vehicle on level ground. After turning off the engine, STEP wait more than 5 minutes for the oil to drain back into the bot- tom of the engine.
Page 521 4-3. Do-it-yourself maintenance 2.7 L 4-cylinder (2TR-FE) engine Full 4.0 L V6 (1GR-FE) engine Full I n f o r ma t i o n P r o v i d e d b y :...
Page 522 4-3. Do-it-yourself maintenance ■ Adding engine oil 2.7 L 4-cylinder (2TR-FE) engine If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. CTH43AS129 4.0 L V6 (1GR-FE) engine If the oil level is below or near the low level mark, add engine oil of the same type as that...
Page 523 If your vehicle consumes more than 1.1 qt. (1.0 L, 0.9 Imp. qt.) every 600 miles (1000 km), contact your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 524 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 525: Engine Coolant
Visually check the radiator, hoses, engine coolant reservoir caps, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system. I n f o r ma t i o n P r o v i d e d b y :...
Page 526 Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. CAUTION ■ When the engine is hot Do not touch the radiator or condenser as they may be hot and cause burns.
Page 527 4-3. Do-it-yourself maintenance Brake fluid ■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. CTH43AS120 ■ Adding fluid Make sure to check the fluid type and prepare the necessary item. Fluid type FMVSS No.116 DOT 3 or SAE J1703 brake fluid Item...
Page 528 4-3. Do-it-yourself maintenance ■ Brake fluid can absorb moisture from the air Excess moisture in the brake fluid can cause a dangerous loss of braking efficiency. Use only newly opened brake fluid. CAUTION ■ When filling the reservoir Take care as brake fluid can harm your hands and eyes and damage painted surfaces.
Page 529 4-3. Do-it-yourself maintenance Power steering fluid ■ Fluid level The fluid level should be within the appropriate range. 2.7 L 4-cylinder (2TR-FE) engine Full (when cold) Add fluid (when cold) Full (when hot) Add fluid (when hot) CTH43AS130 4.0 L V6 (1GR-FE) engine Full (when cold) Add fluid (when cold) Full (when hot)
Page 530 4-3. Do-it-yourself maintenance ■ Checking the fluid level Make sure to check the fluid type and prepare the necessary items. ® Fluid type Automatic transmission fluid DEXRON II or III Items Rag or paper, clean funnel (only for adding fluid) Clean all dirt off the reservoir.
Page 531 4-3. Do-it-yourself maintenance Battery Check the battery as follows: Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp CTH43AS118 ■ Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive.
Page 532 Make sure to turn off the engine before disconnect the battery. Take extra care when connecting the battery if the “ENGINE START STOP” switch mode prior to discharge is unknown. If the system will not start even after multiple attempts, contact your Toyota dealer. CAUTION ■...
Page 533 4-3. Do-it-yourself maintenance CAUTION ■ Where to safely charge the battery Always charge the battery in an open area. Do not charge the battery in a garage or closed room where there is insufficient ventilation. ■ How to recharge the battery Only perform a slow charge (5 A or less).
Page 534: Washer Fluid
4-3. Do-it-yourself maintenance Washer fluid Type A If any washer does not work or the low washer fluid warning light comes on, the washer tank may be empty. Add washer fluid. CTH43AS119 Type B If the washer fluid level is at “LOW”, add washer fluid.
Page 535 4-3. Do-it-yourself maintenance NOTICE ■ Do not use any fluid other than washer fluid Do not use soapy water or engine antifreeze instead of washer fluid. Doing so may cause streaking on the vehicle’s painted surfaces. ■ Diluting washer fluid Dilute washer fluid with water as necessary.
Page 536: Tires
■ Tire rotation Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recom- mends that tire rotation is Front carried out at the same inter- val as tire inspection. ■...
Page 537 ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer. (→P. 515) Registering ID codes The tire pressure warning valve and transmitter is equipped with a unique ID code.
Page 538 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly.
Page 539 4-3. Do-it-yourself maintenance ■ Tire types ● Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.
Page 540 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires.)
Page 541 Repairing or replacing tires, wheels and tire pressure warning valves and transmitters When removing or fitting the wheels, tires or the tire pressure warning valves and transmitters, contact your Toyota dealer as the tire pressure warning valves and transmitter may be damaged if not handled correctly. ■...
Page 542: Tire Inflation Pressure
4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size are displayed on the tire and loading information label. (→P. 626) CTH43AS078 I n f o r ma t i o n P r o v i d e d b y :...
Page 543 4-3. Do-it-yourself maintenance ■ Inspection and adjustment procedure Tire valve Tire pressure gauge Remove the tire valve cap. STEP Press the tip of the tire pressure gauge onto the tire valve. STEP Read the pressure using the gauge gradations. STEP If the tire inflation pressure is not at the recommended STEP level, adjust the pressure.
Page 544 Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent inflating, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 545 4-3. Do-it-yourself maintenance CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury: ● Excessive wear ● Uneven wear ●...
Page 546: Wheels
● Bent wheels that have been straightened ■ Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 547 ● Because tire repair or replacement may affect the tire pressure warning valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 548: Air Conditioning Filter
4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be cleaned or changed regularly to maintain air conditioning efficiency. ■ Removal method Turn the engine switch (vehicles without a smart key sys- STEP tem) or “ENGINE START STOP” switch (vehicles with a smart key system) off.
Page 549 CTH43AS026 bar). If an air gun is not available, have the filter cleaned by your Toyota dealer. ■ Checking interval Inspect, clean and replace the air conditioning filter according to the mainte- nance schedule. In dusty areas or areas with heavy traffic flow, more fre- quent cleaning or early replacement may be required.
Page 550: Wireless Remote Control/Electronic Key Battery
4-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. ■ You will need the following items: ● Flathead screwdriver ● Lithium battery CR2016 (vehicles without a smart key sys- tem), or CR1632 (vehicles with a smart key system) ■...
Page 551 4-3. Do-it-yourself maintenance ■ Replacing the battery (vehicles with a smart key system) Take out the mechanical key. STEP Remove the cover. STEP To prevent damage to the key, cover the tip of the screwdriver with a rag. Remove the depleted battery. STEP Insert a new battery with the “+”...
Page 552 Use a CR2016 (vehicles without a smart key system) or CR1632 (vehi- cles with a smart key system) lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appli- ance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manufacturer.
Page 553: Checking And Replacing Fuses
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Vehicles without a smart key system STEP Turn the engine switch off. Vehicles with a smart key system Turn the “ENGINE START STOP”...
Page 554 4-3. Do-it-yourself maintenance After a system failure, see “Fuse layout and amperage rat- STEP ings” (→P. 535) for details about which fuse to check. Remove the fuse. STEP Only type A fuse can be removed using the pull-out tool. CTH43AS029 Check if the fuse is blown.
Page 555 4-3. Do-it-yourself maintenance Type C Normal fuse Blown fuse Replace the blown fuse with a new fuse of an appropriate amperage rating. The amper- age rating can be found on the fuse box lid. CTH43AS073 Type D Normal fuse Blown fuse Replace the blown fuse with a new fuse of an appropriate amperage rating.
Page 556 4-3. Do-it-yourself maintenance Type F Normal fuse Blown fuse Contact your Toyota dealer. CTH43AS076 I n f o r ma t i o n P r o v i d e d b y :...
Page 557 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment CTH43AS079 Fuse Ampere Circuit 30 A PTC HTR NO.3 PTC heater 30 A Rear window defogger 20 A DEICER Windshield wiper de-icer 30 A PTC HTR NO.2 PTC heater 30 A SUB BATT Trailer sub battery...
Page 558 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Right-hand headlight (high 10 A H-LP RH-HI beam) Left-hand headlight (high 10 A H-LP LH-HI beam) 50 A Air conditioning system 80 A 400W INV Power outlets 30 A Starter system 20 A H-LP HI H-LP RH-HI, H-LP LH-HI fuses 7.5 A ALT-S...
Page 559 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Multiport fuel injection system/ 7.5 A EFI NO.2 sequential multiport fuel injec- tion system HTR, 400W INV, A/C COMP, TOWING TAIL, SUB BATT, MIR HTR, DEF, DEICER, STOP, PTC HTR NO.1, PTC 120 A* HTR NO.2, PTC HTR NO.3, S/HTR FR, ACC, P/OUTLET, IG1, ECU-IG NO.1, ECU-IG...
Page 560 4-3. Do-it-yourself maintenance ■ Driver’s side instrument panel Fuse Ampere Circuit TAIL 10 A Stop/tail lights PANEL 7.5 A Instrument panel lights GAUGE 7.5 A Meter and gauge Multiport fuel injection system/ sequential multiport fuel injec- 10 A tion system, air bag system, smart key system WASHER 20 A...
Page 561 4-3. Do-it-yourself maintenance Fuse Ampere Circuit DOOR RL 25 A Power windows 7.5 A Starter system 7.5 A Air conditioning system 7.5 A On-Board diagnosis FOG FR 15 A Fog lights Multiplex communication sys- D/L NO.2 25 A P/SEAT FL 30 A Front driver’s power seat 20 A...
Page 562 Never use a fuse of a higher amperage rating than that indicated, or use any other object in place of a fuse. ● Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix. This can cause extensive damage or even fire.
Page 563: Light Bulbs
You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 564 4-3. Do-it-yourself maintenance ■ Rear bulb locations Stop/tail and rear Back-up light side marker light Rear turn signal light License plate lights CTH43AS102 Replacing light bulbs ■ Headlight Turn the bulb base counterclock- STEP wise. High beam (inside) Low beam (outside) CTH43AS126 I n f o r ma t i o n P r o v i d e d b y :...
Page 565 4-3. Do-it-yourself maintenance Unplug connector while STEP depressing the lock release. High beam Low beam CTH43AS091 ■ Parking light and front side marker light Turn the steering wheel in the STEP opposite direction of the parking light and front side marker light that you wish to replace.
Page 566 4-3. Do-it-yourself maintenance Turn the bulb base counterclock- STEP wise. CTH43AS114 Remove the light bulb. STEP CTH43AS115 ■ Fog light (if equipped) Turn the steering wheel in the STEP opposite direction of the fog light that you wish to replace. For example, if you wish to replace the fog light on the right side, turn the steering wheel to...
Page 567 4-3. Do-it-yourself maintenance Partly remove the fender liner. STEP CTH43AS093 Unplug connector while STEP depressing the lock release. CTH43AS094 Turn the bulb base counterclock- STEP wise. CTH43AS095 I n f o r ma t i o n P r o v i d e d b y :...
Page 568 4-3. Do-it-yourself maintenance ■ Front turn signal light and daytime running light Turn the steering wheel in the STEP opposite direction of the front turn signal light and daytime run- ning light that you wish to replace. For example, if you wish to replace the front turn signal light and daytime running light on the CTH43AS072...
Page 569 4-3. Do-it-yourself maintenance Turn the bulb base counterclock- STEP wise. CTH43AS060 Remove the light bulb. STEP CTH43AS125 I n f o r ma t i o n P r o v i d e d b y :...
Page 570 4-3. Do-it-yourself maintenance ■ Stop/tail and rear side marker light and back-up light Open the back door and remove STEP the cover. Using a flathead screwdriver or equivalent which is wrapped with a cloth. CTH43AS042 Turn the bulb base counterclock- STEP wise.
Page 571 4-3. Do-it-yourself maintenance ■ Rear turn signal light Open the back door and remove STEP the cover. Using a flathead screwdriver or equivalent which is wrapped with a cloth. CTH43AS042 Turn the bulb base counterclock- STEP wise. CTH43AS045 Remove the light bulb. STEP CTH43AS046 I n f o r ma t i o n P r o v i d e d b y :...
Page 572 STEP CTH43AS048 ■ Lights other than the above If any of the lights listed below has burnt out, have your Toyota dealer replace it. ● Side turn signal lights (if equipped) ● High mounted stoplight ● Outer foot lights (if equipped)
Page 573 ■ LED light bulbs The side turn signal lights and high mounted stoplight consist of a number of LEDs. If any LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. ■ Condensation build-up on the inside of the lens Contact your Toyota dealer for more information in the following situations.
Page 574 4-3. Do-it-yourself maintenance I n f o r ma t i o n P r o v i d e d b y :...
Page 575: 5-1. Essential Information
5-1. Essential information Emergency flashers Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the turn signal lights. To turn them off, press the switch once again. CTH51AS005 NOTICE ■...
Page 576: If Your Vehicle Needs To Be Towed
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 577 5-1. Essential information Vehicles with a front spoiler only: Before using the front emer- gency towing eyelet(s), remove the cover(s). CTH51AS007 Removing the clips Installing the clips CTH51AS008 Towing with a sling-type truck Do not tow with a sling-type truck to prevent body damage.
Page 578 5-1. Essential information Towing with a wheel lift-type truck From the front Use a towing dolly under the rear wheels. From the rear (2WD models) Vehicles without a smart key system: Turn the engine switch to the “ACC” position so that the steering wheel is unlocked.
Page 579 5-1. Essential information Using a flatbed truck If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the tie downs or the vehicle may be damaged. ■ Before emergency towing Vehicles without a smart key system: Turn the engine switch to the STEP...
Page 580 5-1. Essential information CAUTION ■ Caution while towing ● Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing eyelets and the cables or chains. Always use caution for the surroundings and other vehicles while towing. ●...
Page 581 5-1. Essential information NOTICE ■ To prevent body damage when towing with a sling-type truck Do not tow with a sling-type truck, either from the front or rear. ■ To prevent causing serious damage to the transmission and transfer (4WD models) in emergency towing Never tow a vehicle from the rear with four wheels on the ground.
Page 582: If You Think Something Is Wrong
5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 583: Fuel Pump Shut Off System
5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 584: Event Data Recorder
5-1. Essential information Event data recorder Your vehicle has computers that monitor and control certain aspects of your vehicle. These computers assist in driving and maintaining optimal vehicle performance. Besides storing data useful for troubleshooting, there is an event data recorder (EDR) that records data in a crash or near crash event.
Page 585 5-1. Essential information Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third party except when: ● An agreement from the vehicle’s owner (or the leasing company for a leased vehicle) is obtained ●...
Page 586: Steps To Take In An
If a light comes on or flashes, but then goes off, this does not necessarily indicate a malfunction in the system. However, if this continues to occur, have the vehicle inspected by your Toyota dealer. Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.
Page 587 Low engine oil pressure warning light Indicates that the engine oil pressure is too low Have the vehicle inspected by your Toyota dealer immediately. Failure to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident.
Page 588 5-2. Steps to take in an emergency Warning light Warning light/Details ABS warning light (U.S.A.) Indicates a malfunction in: • The ABS; or • The brake assist system (Canada) Slip indicator Indicates a malfunction in: • The VSC system; • The TRAC (TRC) system; •...
Page 589 When the light comes on after blinking for 1 minute: Have the system checked Malfunction in the tire by your Toyota dealer. pressure warning system Automatic transmission Stop the vehicle in a safe fluid temperature warning place and shift the shift light lever to P.
Page 590 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Maintenance required reminder light Indicates that maintenance is required according to the driven distance on the main- tenance schedule. Illuminates for about 3 sec- onds and then flashes for about 15 seconds approxi- If necessary, perform main- mately 4500 miles (7200...
Page 591 5-2. Steps to take in an emergency Follow the correction procedures. (vehicles with a smart key system) After taking the specified steps to correct the suspected problem, check that the warning light goes off. Warning Correction Interior Exterior Warning light/Details buzzer buzzer light...
Page 592 5-2. Steps to take in an emergency Interior Exterior Warning Correction Warning light/Details buzzer buzzer light procedure Smart key system warning light Indicates that the driver’s • Shift the shift door has been opened and lever to P. closed with the shift lever not •...
Page 593 If it is, tighten it securely. The light will go off after several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible. I n f o r ma t i o n P r o v i d e d b y :...
Page 594 5-2. Steps to take in an emergency ■ The tire pressure warning light may come on due to natural causes The tire pressure warning light may come on due to natural causes such as natural air leaks and tire inflation pressure changes caused by tem- perature.
Page 595 If there is a lot of snow or ice on the vehicle, particularly around the wheels or wheel housings ● If non-genuine Toyota wheels are used (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) ●...
Page 596 Check the tires. If a tire is flat, change it with the spare tire and have the flat tire repaired by the nearest Toyota dealer. ● Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate, you could lose control of the steering wheel or the brakes.
Page 597 5-2. Steps to take in an emergency CAUTION ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
Page 598 5-2. Steps to take in an emergency CAUTION Your vehicle has also been equipped with a TPMS (tire pressure warning system) malfunction indicator to indicate when the system is not operat- ing properly. The TPMS (tire pressure warning system) malfunction indi- cator is combined with the low tire pressure telltale (tire pressure warning light).
Page 599: If You Have A Flat Tire
5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare tire provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ●...
Page 600 5-2. Steps to take in an emergency Taking out the jack and tool bag Remove the cover. STEP CTH52AS020 Unhook and take out the tool STEP bag. CTH52AS004 Take out the jack. STEP For loosening For tightening CTH52AS035 I n f o r ma t i o n P r o v i d e d b y :...
Page 601 5-2. Steps to take in an emergency Taking out the spare tire Assemble the jack handle exten- STEP sion as shown. Be sure to tighten each bolt securely. CTH52AS006 When connecting the jack han- STEP dle extensions, use the jack han- dle to tighten the square head bolt.
Page 602 5-2. Steps to take in an emergency Insert the end of the jack handle STEP extension into lowering screw and turn it counterclock- wise. Lower the spare tire completely to the ground. CTH52AS008 Pull out the spare tire and STEP remove the holding bracket.
Page 603 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. STEP Wheel Flat tire chock posi- tions Behind the Left- rear right- hand hand side side CTH52AS038 tire Front Behind the Right- rear left- hand hand side side tire In front of...
Page 604 5-2. Steps to take in an emergency Slightly loosen the wheel nuts STEP (one turn). CTH52AS012 Position the jack at the jack STEP points as shown. Front - Under the chassis frame side rail Rear - Under the rear axle hous- CTH52AS039 Assemble the jack handle exten- STEP...
Page 605 5-2. Steps to take in an emergency When connecting the jack han- STEP dle extensions, use the jack han- dle to tighten the square head bolt. Make sure that the bolt fits into the depression on the joint. When connecting the jack han- dle extension with the jack han- dle, tighten the round head bolt CTH52AS007...
Page 606 5-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 607 5-2. Steps to take in an emergency Lower the vehicle. STEP CTH52AS019 Firmly tighten each wheel nut STEP two or three times in the order shown in the illustration. Tightening torque: 83 ft•lbf (110 N•m, 11.5 kgf•m) CTH52AS029 Stowing the flat/spare tire, jack and tools Lay down the tire with the outer STEP side facing up, and install the...
Page 608 5-2. Steps to take in an emergency ■ After completing the tire change The tire pressure warning system must be reset. (→P. 515) ■ When using the spare tire As the spare tire is not equipped with a tire pressure warning valve and transmitter, low inflation pressure of the spare tire will not be indicated by the tire pressure warning system.
Page 609 ● If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. Failure to follow these precautions could cause the wheel nuts to loosen and the tire to fall off, resulting in death or serious injury.
Page 610 When replacing the tires ● When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled cor- rectly.
Page 611: If The Engine Will Not Start
5-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting procedures are being followed (→P. 164, 167), consider each of the following points: ■ The engine will not start even though the starter motor operates normally.
Page 612 ● There may be a malfunction in the steering lock system. (vehi- cles with a smart key system) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with a smart key system) When the engine does not start, the following steps can be used as an interim measure to start the engine if the “ENGINE START STOP”...
Page 613: If The Shift Lever Cannot Be Shifted From P
(a system to pre- vent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted: Set the parking brake.
Page 614 5-2. Steps to take in an emergency Multi-mode type Pry the cover up with a flat- STEP head screwdriver or equiva- lent tool. CTH52AS021 Press the shift lock override STEP button. The shift lever can be shifted while the button is pressed. CTH52AS022 I n f o r ma t i o n P r o v i d e d b y :...
Page 615: If You Lose Your Keys
5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. For vehicles with the smart key system, bring the other key and the key number stamped on the key number plate. For vehicles without the smart key system, bring a master key and the key number stamped on the key number plate.
Page 616: If You Cannot Operate Back Door Opener
If the back door opener does not operate, there may be a problem with the back door opener system. Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the back door can be opened from the inside.
Page 617: If The Electronic Key Does Not Operate Properly (Vehicles With A Smart Key System)
5-2. Steps to take in an emergency If the electronic key does not operate properly (vehicles with a smart key system) If communication between the electronic key and vehicle is inter- rupted (→P. 41) or the electronic key cannot be used because the battery is depleted, the smart key system and wireless remote con- trol cannot be used.
Page 618 Changing “ENGINE START STOP” switch modes and starting the engine Ensure that the shift lever is in P and depress the brake pedal. STEP Touch the Toyota emblem side of STEP electronic “ENGINE START STOP” switch. If any of the doors is opened or...
Page 619: If The Vehicle Battery Is Discharged
The following procedures may be used to start the engine if the vehi- cle's battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your vehicle by follow- ing the steps below.
Page 620 5-2. Steps to take in an emergency 4.0 L V6 (1GR-FE) engine STEP CTH52AS044 Connect the jumper cables according to the following procedure: Connect a positive jumper cable clamp to the positive (+) battery terminal on your vehicle. Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle.
Page 621 Once the engine starts, have the vehicle inspected at your Toyota dealer as soon as possible. I n f o r ma t i o n P r o v i d e d b y :...
Page 622 5-2. Steps to take in an emergency ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting. ■ To prevent battery discharge ● Turn off the headlights and the audio system while the engine is off. ●...
Page 623 5-2. Steps to take in an emergency CAUTION ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery: ● Make sure each jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any other than the intended terminal.
Page 624: If Your Vehicle Overheats
Wait until the temperature of the engine (shown on the instrument panel) begins to fall and then stop the engine. If the fan is not operating: Stop the engine immediately and call your Toyota dealer. After the engine has cooled STEP...
Page 625 Water can be used in an emer- gency if engine coolant is (→P. 616) unavailable. CTH52AS033 Have the vehicle inspected at the nearest Toyota dealer as soon as possible. ■ Overheating If you observe the following, your vehicle may be overheating: ●...
Page 626 5-2. Steps to take in an emergency NOTICE ■ When adding engine coolant Wait until the engine has cooled down before adding engine coolant. When adding coolant, do so slowly. Adding cool coolant to a hot engine too quickly can cause damage to the engine. I n f o r ma t i o n P r o v i d e d b y :...
Page 627: If The Vehicle Becomes Stuck
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Stop the engine. Set the parking brake and shift the shift STEP lever to P.
Page 628 5-2. Steps to take in an emergency NOTICE ■ To avoid damage to the transmission and other components ● Avoid spinning the wheels and depressing the accelerator pedal more than necessary. ● If the vehicle remains stuck even after these procedures are performed, the vehicle may require towing to be freed.
Page 629 5-2. Steps to take in an emergency I n f o r ma t i o n P r o v i d e d b y :...
Page 630: Specifications Maintenance Data (Fuel, Oil Level, Etc.)
6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Overall length 189.8 in. (4820 mm) Overall width 75.8 in. (1925 mm) Overall height 70.1 in. (1780 mm) Wheelbase 109.8 in. (2790 mm) Front 63.2 in. (1605 mm) Tread Rear 63.2 in.
Page 631: Vehicle Identification
Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
Page 632 6-1. Specifications ■ Engine number 2.7 L 4-cylinder (2TR-FE) engine The engine number is stamped on the engine block as shown. CTH61AS003 4.0 L V6 (1GR-FE) engine The engine number is stamped on the engine block as shown. CTH61AS004 I n f o r ma t i o n P r o v i d e d b y :...
Page 633 6-1. Specifications Engine 2.7 L 4-cylinder (2TR-FE) engine Model 2TR-FE Type 4-cylinder in line, 4-cycle, gasoline 3.74 × 3.74 in. (95.0 × 95.0 mm) Bore and stroke Displacement 164.4 cu.in. (2694 cm Drive belt tension Automatic adjustment Valve clearance Automatic adjustment (engine cold) 4.0 L V6 (1GR-FE) engine Model...
Page 634: Lubrication System
6.0 qt. (5.7 L, 5.0 Imp. qt.) ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC multigrade engine oil...
Page 635 6-1. Specifications How to read oil container label: The ILSAC (International Lubricant Standardization and Approval Committee) Certification Mark is added to some oil containers to help you select the oil you should use. CTH61AS018 I n f o r ma t i o n P r o v i d e d b y :...
Page 636: Cooling System
Capacity 4.0 L V6 (1GR-FE) engine 11.1 qt. (10.5 L, 9.2 Imp. qt.) Use either of the following: • “Toyota Super Long Life Coolant” • A similar high-quality ethylene glycol- Coolant type based non-silicate, non-amine, non- nitrite, and non-borate coolant with long- life hybrid organic acid technology Do not use plain water alone.
Page 637: Electrical System
Recommended oil viscosity SAE 75W : “Toyota Genuine Transfer Gear oil LF” is filled in your Toyota vehicle at factory fill. Use Toyota approved “Toyota Genuine Transfer Gear oil LF” or an equivalent of matching quality to satisfy the above specifi- cation.
Page 638 Oil type and viscosity 75W-85 GL-5 or equivalent : “Toyota Genuine Differential Gear Oil” is filled in your Toyota vehicle at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent of matching quality to satisfy the above specification.
Page 639 Toyota dealer. NOTICE ■ Transmission fluid type Using transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of the transmission accompanied by vibration and, ultimately, damage to the vehicle’s transmission. Brakes Pedal clearance 3.62 in.
Page 640 6-1. Specifications Chassis lubrication Propeller shafts Spider Lithium base chassis grease, NLGI No.2 Slide yoke Molybdenum-disulfide lithium base chas- sis grease, NLGI No.2 or lithium base mul- tipurpose grease, NLGI No.2 Steering Free play Less than 1.2 in. (30 mm) ®...
Page 641 6-1. Specifications Tires and wheels 2.7 L 4-cylinder (2TR-FE) engine Tire size P265/70R17 113S Front: 33 psi (230 kPa, 2.3 kgf/cm or bar) Tire inflation pressure Rear: (Recommended cold tire 33 psi (230 kPa, 2.3 kgf/cm or bar) inflation pressure) Spare: 33 psi (230 kPa, 2.3 kgf/cm or bar)
Page 642: Light Bulbs
6-1. Specifications Light bulbs Light Bulbs Bulb No. Type Headlights ⎯ Low beam ⎯ High beam Front turn signal and daytime 1156NA running lights Parking lights and front side ⎯ marker lights ⎯ Exterior Fog lights ⎯ Rear turn signal lights ⎯...
Page 643: Fuel Information
ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada. ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. ■...
Page 644 ■ Non-recommendation of the use of blended gasoline ● Toyota allows the use of oxygenate blended gasoline where the oxygen- ate content is up to 10% ethanol or 15% MTBE. ● If you use gasohol in your vehicle, be sure that it has an octane rating no lower than 87.
Page 645 Non-recommendation of the use of gasoline containing MMT Some gasoline contains an octane enhancing additive called MMT (Methyl- cyclopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected.
Page 646: Tire Information
6-1. Specifications Tire information Typical tire symbols CTH61AS021 Tire size (→P. 628) Summer tire or all season tires (→P. 517) An all season tire has “M+S” on the sidewall. A tire not marked “M+S” is a summer tire. Uniform tire quality grading For details, see “Uniform Tire Quality Grading”...
Page 647 6-1. Specifications Maximum cold tire inflation pressure (→P. 621) This means the pressure to which a tire may be inflated. TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly put into the tire. A tube type tire has a tube inside the tire and the tube main- tains the air pressure.
Page 648 6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code CTH61AS009 (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol...
Page 649 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
Page 650 6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speci- fied government test course. For example, a tire graded 150 would wear one and a half (1 - 1/2) times as well on the government course as a tire graded 100.
Page 651 6-1. Specifications Warning: The temperature grades of a tire assume that it is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sepa- rately or in combination, can cause heat buildup and possible tire fail- ure. Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been...
Page 652 6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as speci- Occupant distribution fied in the third column of Table 1 below The combined weight of installed regular pro- duction options weighing over 5 lb.
Page 653 6-1. Specifications Tire related term Meaning The load on an individual tire that is determined by distributing to each axle its share of curb Vehicle normal load weight, accessory weight, and normal occu- on the tire pant weight (distributed in accordance with Table 1 below), and dividing it by two The surface area of the rim not covered by the...
Page 654 6-1. Specifications Tire related term Meaning A tire designed to operate at higher loads and Extra load tire at higher inflation pressures than the corre- sponding standard tire Groove The space between two adjacent tread ribs The layer(s) forming the inside surface of a Innerliner tubeless tire that contains the inflating medium within the tire...
Page 655 6-1. Specifications Tire related term Meaning The linear distance between the exteriors of the sidewalls of an inflated tire, including eleva- Overall width tions due to labeling, decorations, or protective bands or ribs A tire intended for use on passenger cars, mul- tipurpose passenger vehicles, and trucks, that Passenger car tire have a gross vehicle weight rating (GVWR) of...
Page 656 6-1. Specifications Tire related term Meaning A tire that attains a traction index equal to or greater than 110, compared to the ASTM E- 1136 Standard Reference Test Tire, when using the snow traction test as described in ASTM F-1805-00, Standard Test Method for Snow tire Single Wheel Driving Traction in a Straight Line on Snow-and Ice-Covered Surfaces, and which...
Page 657 6-1. Specifications Designated seating Occupant distribution in Vehicle normal load, capacity, Number of a normally loaded Number of occupants occupants vehicle 2 through 4 2 in front 2 in front, 1 in second 5 through 10 seat 2 in front, 1 in second 11 through 15 seat, 1 in third seat, 1 in fourth seat...
Page 658: 6-2. Customization
Programming these preferences requires specialized equipment and may be performed by your Toy- ota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Customized Item Function...
Page 659 6-2. Customization Customized Item Function Default setting setting Speed-detecting auto- matic door lock function Shifting the shift lever to position other than P Door lock locks all doors (→P. 51, 596) Shifting the shift lever to P unlocks all doors Opening driver’s door unlocks all doors Mechanical key linked...
Page 660 6-2. Customization Customized Item Function Default setting setting 7.5 seconds Time period before 15 seconds lights turn off 30 seconds Vehicles without a smart key system: Operation after the engine switch is turned to the “LOCK” position Vehicles with a smart key system: Operation after the “ENGINE START STOP”...
Page 661 6-2. Customization Customized Item Function Default setting setting Vehicles with a smart key system: Operation when you approach the vehicle with the elec- tronic key on your per- Operation when the doors are unlocked Outer foot using the wireless lights remote control, key or (if equipped) entry function...
Page 662 6-2. Customization Customized Item Function Default setting setting Wiper operates auto- matically when washer is operated Drip prevention function Rear window 2 seconds wiper and Wiper operation interval 3 seconds 4 seconds washer (→P. 207) 5 seconds 4 seconds Time elapsed before the rear wiper storage 3 seconds 5 seconds...
Page 663 6-2. Customization Customized Item Function Default setting setting Vehicles with a smart 1 second key system: Time Power back required to press and 1.2 seconds window 0.8 seconds hold the switch before (→P. 94) the window begins to 1.4 seconds open/close Intuitive parking...
Page 664: Initialization Items To Initialize
6-3. Initialization Items to initialize The following item must be initialized for normal system operation in cases such as after the battery is reconnected, or maintenance is performed on the vehicle. Item When to initialize Reference Maintenance data After the maintenance is performed. P.
Page 665: Reporting Safety Defects For U.s. Owners
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 666: Seat Belt Instructions For Canadian Owners (In French)
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité...
Page 667 Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eau savonneuse tiède. Profitez de l'occasion pour vérifier régulièrement que les ceintures ne sont pas effilochées, entaillées, ou ne paraissent pas exagérément usées. ATTENTION ■ Détérioration et usure des ceintures de sécurité...
Page 668: Abbreviation List
Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING 2 Wheel Drive 4 Wheel Drive Anti-lock Brake System Accessory AI-SHIFT Artificial Intelligence Shift control Automatic Locking Retractor A-TRAC Active traction control system AUTO LSD Automatic Limited Slip Differential Auxiliary Child Restraint System Downhill assist control system Electronic Control Unit Event Data Recorder Emergency Locking Retractor...
Page 669 Abbreviation list ABBREVIATIONS MEANING On Board Diagnostics RSCA Roll Sensing of Curtain Shield airbag Supplemental Restraint System Tire Identification Number TPMS Tire Pressure Warning System TRAC/TRC Traction Control Vehicle Identification Number Vehicle Stability Control I n f o r ma t i o n P r o v i d e d b y :...
Page 670: Alphabetical Index
Alphabetical index Alphabetical index A/C........296, 302 Alarm......... 109 ABS ...........253 Antenna ........321 Accessory meter ......194 Anti-lock brake system ... 253 Active head restraints ....62 Armrest ........448 Active traction control.....230 Audio input....... 360 Air conditioning filter....526 Audio remote controls .... 361 Air conditioning system Audio system Air conditioning filter....526...
Page 671 Alphabetical index Back door Child restraint system Back door ....... 56 Booster seats, definition..135 Back window ......94 Booster seats, installation ..139 Smart key system....33 Convertible seats, Wireless remote control..47 definition ......135 Back-up lights Convertible seats, Replacing light bulbs .... 542 installation......139 Wattage ........
Page 672 Alphabetical index Clock .........431 Driving Coin holder .......419 Break-in tips ......155 Compass........450 Correct posture ..... 112 Condenser ........504 Driving assist systems ..253 Console box ......418 Off-road precautions ..... 262 Cooling system Procedures......154 Engine overheating ....603 Winter driving tips ....275 Crawl Control ......241 Cruise control......209 Electronic key...
Page 673 Alphabetical index Engine Floor mat........449 Compartment......495 Fluid Engine switch ....164, 167 Brake........505 Hood........494 Power steering ......507 How to start Washer........512 the engine ....164, 167 Fog lights Identification number .... 611 Replacing light bulbs .....541 If the engine will not start..590 Switch........204 Ignition switch....
Page 674 Alphabetical index Garage door opener....462 Interior lights Gas station information...664 Interior lights ......413 Gauges........182 Switch ........414 Glove box........417 Wattage......... 622 Grocery bag hooks ....459 Intuitive parking assist.... 213 Hands-free system Jack (for cellular phone) ....380 Vehicle-equipped jack... 578 Hazard lights Jack handle ......
Page 675 Alphabetical index Lights Mirrors Door courtesy lights....413 Inside rear view mirror.....87 Emergency flasher switch ..554 Side mirror heaters....310 Engine switch light....413 Side mirrors......89 Fog light switch..... 204 Vanity mirrors ......430 Footwell lights....... 413 Moon roof ........98 Hazard light switch ....554 MP3 disc ........333 Headlight switch ....
Page 676 Alphabetical index Radiator ........504 Pregnant women, Radio .........317 proper seat belt use....81 Rear differential lock Reminder light....... 568 system ........235 Seat belt extenders ....82 Rear seats Seat belt pretensioners ...80 Adjustment ......65 Seat heaters ......446 Folding down....67, 69, 72 Seating capacity ......
Page 677 Alphabetical index Specifications......610 Tachometer Speech command switch ..385 Tachometer ......182 Speedometer ......182 Tail lights Steering Replacing light bulbs .....541 Column lock release..165, 170 Switch........198 Fluid........507 Wattage.........622 Steering wheel Talk switch........385 Adjustment ......86 Telephone switch.....385 Audio switches .....
Page 678 Alphabetical index Turn signal lights Washer Replacing light bulbs .....541 Checking ....... 512 Switch........179 Preparing and checking Wattage.........622 before winter....... 275 Switch ......205, 207 Washing and waxing ....478 Valet key ........30 Weight Vanity lights Cargo capacity ...... 267 Vanity lights......430 Load limits......
Page 679: What To Do If
What to do if... What to do if... A tire punctures If you have a flat tire P. 578 Engine immobilizer system P. 106 The engine does not start If the engine will not start P. 590 If the battery is discharged P.
Page 680 What to do if... Vehicles with non-Optitron type meters Vehicles with Optitron type meters CTHPIAS082 I n f o r ma t i o n P r o v i d e d b y :...
Page 681 What to do if... ■Warning lights Brake system warning Unengaged “Park” light warning light P. 567 Power steering warning light P. 567 Low fuel level warning light P. 565 P. 568 Driver’s seat belt Charging system warn- reminder light ing light P.
Page 682 2.7 L 4-cylinder (2TR-FE) engine 5.4 qt. (5.1 L, 4.5 Imp. qt.) 4.0 L V6 (1GR-FE) engine 6.0 qt. (5.7 L, 5.0 Imp. qt.) “Toyota Genuine Motor Oil” or equivalent Engine oil type Oil grade: ILSAC multigrade engine oil P. 614...

This manual is also suitable for:

2011 4runner

Toyota 4RUNNER 2010 Quick Reference Manual

1 Before Driving

1-1. Key Information

Opening, Closing and

Adjustable Components

Refueling Opening the Fuel Tank Cap

1-6. Theft Deterrent System

1-7. Safety Information

2-1. Driving Procedures

Instrument Cluster Gauges and Meters

Operating the Lights and

Using Other Driving

2-5. Driving Information

3-1. Using the Air Conditioning System and Defogger

3-2. Using the Audio System

Using the Bluetooth ® Audio System

Using the Hands-Free

3-5. Using the Interior Lights

3-6. Using the Storage Features

3-7. Other Interior Features

4 1. Maintenance and Care

4-1. Maintenance and Care

4-2. Maintenance

4-3. Do-It-Yourself Maintenance

5-1. Essential Information

Steps to Take in an

Specifications Maintenance Data (Fuel, Oil Level, Etc.)

6-2. Customization

Initialization Items to Initialize

Abbreviation List

Alphabetical Index

What to Do if

Quick Links

TABLE OF CONTENTS

Related Manuals for Toyota 4RUNNER 2010

Summary of Contents for Toyota 4RUNNER 2010