How To Initialize The Tire Pressure Warning System; Registering Id Codes - Toyota 2016 Prius Service Manual

Hide thumbs Also See for 2016 Prius:

Table of Contents

7-3. Do-it-yourself maintenance

How to initialize the tire pressure warning system

Park the vehicle in a safe place and turn the power switch off.

Initialization cannot be performed while the vehicle is moving.

Adjust the tire inflation pressure to the specified cold tire inflation

pressure level. (P. 734)

Make sure to adjust the tire pressure to the specified cold tire infla-

tion pressure level. The tire pressure warning system will operate

based on this pressure level.

Turn the power switch to ON mode.

Switch the multi-information display to the

Select "Vehicle Settings" on the

screen and then press and hold the

initialization

pletes, a message is dis-

information display and the

tire pressure warning light

illuminates.

The tire pressure warning valve and transmitter is equipped with a

unique ID code. When replacing a tire pressure warning valve and

transmitter, it is necessary to register the ID code. Have the ID code

registered by your Toyota dealer.

PRIUS_OM_OM47A29U_(U)

of the meter control switch, select the "TPMS"

Until Complete