Page 1 Operations and advice which are necessary for Driving driving (Main topics: Starting engine, refueling) Operating the Entune Audio Entune audio (Main topics: Audio/visual, phone, Toyota Entune) Usage of the interior features Interior features (Main topics: Air conditioner, storage features) Caring for your vehicle and maintenance Maintenance...
Page 2: Table Of Contents
TABLE OF CONTENTS For your information....Before driving Reading this manual ....12 How to search......13 3-1. Key information Pictorial index ......14 Keys ......For safety and security 3-2. Opening, closing and lock- ing the doors 1-1. For safe use Side doors ..... Before driving....26 Back door ......
Page 3: Table Of Contents
(rear-crossing vehicles) ................ Automatic transmission . Rear view monitor system ........Turn signal lever.... Toyota parking assist monitor Parking brake............ Brake Hold ....Panoramic view monitor 4-3. Operating the lights and Stop & Start system..wipers Driving mode select switch Headlight switch ....
Page 4 Setup ......iPod/iPhone....5-15.What to do if... (Blue- ® Bluetooth audio ... ® tooth AUX....... Troubleshooting..... 5-8. Audio/visual remote con- 5-16.Toyota Entune overview trols Toyota Entune ....Steering switches..Type A: Function achieved by using a smartphone or DCM ........
Page 5: Table Of Contents
.... using DCM and a smart- Cleaning and protecting the phone ......vehicle interior ..... 5-17.Toyota Entune operation 7-2. Maintenance Toyota Entune App Suite Maintenance requirements Connect............5-18.Entune settings General maintenance ..Toyota Entune App Suite Emission inspection and Connect settings ..
Page 6 TABLE OF CONTENTS 9-3. Initialization If your vehicle has to be stopped in an emergency Items to initialize..........For owners If the vehicle is trapped in ris- ing water...... 8-2. Steps to take in an emer- 10-1.For owners gency Reporting safety defects for If your vehicle needs to be U.S.
Page 7 TABLE OF CONTENTS...
Page 8: For Your Information
However, because of they may have on, your Toyota the Toyota policy of continual vehicle. product improvement, we This vehicle should not be modi-...
Page 9 • For use by Toyota in a lawsuit The recorded data varies • For research purposes where the according to the vehicle grade...
Page 10: Event Data Recorder
 How fast the vehicle was trav- government agency eling. • For use by Toyota in a lawsuit These data can help provide a However, if necessary, Toyota may: better understanding of the cir- •...
Page 11 Driver distraction: Always give vice shop or by your Toyota your full attention to driving. Any- thing that distracts the driver, such dealer before you scrap your as adjusting controls, talking on a vehicle.
Page 12: Reading This Manual
Reading this manual Symbols Meanings Indicates the action Explains symbols used in (pushing, turning, etc.) used to operate this manual switches and other devices. Symbols in this manual Indicates the outcome of an operation (e.g. a Symbols Meanings lid opens). WARNING: Explains something that, if not obeyed,...
Page 13: How To Search
Searching by title ■ How to search  Table of contents: P.2 Searching by name ■  Alphabetical index: P.711 Searching by installation ■ position  Pictorial index: P.14 Searching by symptom or ■ sound  What to do if... (Troubleshoot- ing): P.708...
Page 14: Pictorial Index
Pictorial index Pictorial index ■Exterior Side doors ................P.109 Locking/unlocking ..............P.109 Opening/closing the side windows ........P.158 Locking/unlocking by using the key ......P.110, 647 Warning messages .............. P.633 Back door ................P.115 Opening from inside the cabin ..........P.119 Opening from outside............P.117, 119 Warning messages ..............
Page 15 Pictorial index To prevent freezing (windshield wiper de-icer) ....P.515 Precautions against car wash (Rain-sensing windshield wipers) ........P.551 Replacing the wiper insert............ P.591 Fuel filler door ..............P.221 Refueling method ..............P.221 Fuel type/fuel tank capacity ..........P.660 Tires..................P.573 Tire size/inflation pressure ...........
Page 16 Pictorial index License plate lights............P.210 Turn signal lights .............. P.204 : If equipped...
Page 17: Instrument Panel
Pictorial index ■Instrument panel Engine switch ............. P.195, 196 Starting the engine/changing the modes ..P.195, 195, 196, 199 Emergency stop of the engine ..........P.612 When the engine will not start ..........P.645 Warning messages .............. P.633 Shift lever................P.200 Changing the shift position...........
Page 18 Pictorial index When the warning messages are displayed ......P.633 Turn signal lever..............P.204 Headlight switch ..............P.210 Headlights/parking lights/tail lights/ license plate lights/daytime running lights......P.210 Fog lights ................P.216 Windshield wiper and washer switch....... P.216 Rear window wiper and washer switch ......P.219 Usage................
Page 19 Pictorial index ■Switches Driving position memory switches ......... P.139 Window lock switch ............P.160 Power window switches ............ P.158 Door lock switches ............P.113 Outside rear view mirror switches ........P.156 “ODO TRIP” switch ............P.84, 88 Instrument panel light control dial ....... P.84, 88 Automatic High Beam switch ...........
Page 20 Pictorial index Meter control switches ............P.90 Vehicle-to-vehicle distance switch ........P.257 Cruise control switches Dynamic radar cruise control with full-speed range ..... P.252 Audio remote control switches ........P.436 LTA (Lane Tracing Assist) switch ........P.238 Phone switch ..............P.461 Talk switch .................
Page 21 Pictorial index VSC OFF switch ..............P.363 Front seat heater switches ..........P.517 Front seat ventilator switches ......... P.518 Stop & Start cancel switch ..........P.348 Parking brake switch ............P.205 Applying/releasing..............P.205 Precautions against winter season ........P.370 Warning buzzer/message ..........P.628, 633 Brake hold switch ..............
Page 22 Pictorial index ■Interior SRS airbags ................P.33 Floor mats................P.26 Front seats................P.135 Rear seats ................P.136 Head restraints ..............P.141 Seat belts ................P.29 Console box ............... P.523 Inside lock buttons ............P.113 Cup holders ................ P.523 Assist grips ................ P.540 Rear seat heater switches ..........
Page 23 Pictorial index ■Ceiling “SOS” button ..............P.65 Auxiliary box ..............P.524 Moon roof switches ............P.161 Interior lights ..............P.519 Personal lights ..............P.520 Electronic sunshade switch ........... P.164 Vanity mirrors ..............P.530 Sun visors................P.530 Inside rear view mirror ............
Page 24 Pictorial index...
Page 25: For Safety And Security
For safety and security 1-1. For safe use Before driving....26 For safe driving ....27 Seat belts .......29 SRS airbags ....33 Front passenger occupant classification system ..43 Exhaust gas precautions 1-2. Child safety Riding with children ..49 Child restraint systems... 1-3. Emergency assistance Safety Connect ....65 1-4.
Page 26: Before Driving
Do not use floor mats designed Insert the retaining hooks for other models or different (clips) into the floor mat eye- model year vehicles, even if lets. they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
Page 27: For Safe Driving
1-1. For safe use For safe driving WARNING ■ Before driving For safe driving, adjust the ● Check that the floor mat is securely fixed in the correct seat and mirror to an appro- place with all the provided priate position before driv- retaining hooks (clips).
Page 28: Adjusting The Mirrors
1-1. For safe use properly wear the vehicle’s seat WARNING belt. (P.50) Observe the following precau- tions. Failure to do so may result in Adjusting the mirrors death or serious injury. Make sure that you can see ● Do not adjust the position of the driver’s seat while driving.
Page 29: Seat Belts
Do not use a seat belt for more than one person at once, including chil- dren. ● Toyota recommends that chil- dren be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system.
Page 30 Have tions regarding seat belt usage. any necessary repairs carried (P.29) out by your Toyota dealer. Inap- ■ Seat belt extender propriate handling may lead to incorrect operation. If your seat belts cannot be fastened...
Page 31: Front Seats
1-1. For safe use a click sound is heard. WARNING To release the seat belt, ● Do not wear the seat belt extender if you can fasten the press the release button seat belt without the extender. ■ Emergency locking retractor ●...
Page 32: Seat Belt Pretensioners
In that case, the seat frontal or side collision or a vehi- belt cannot be used again and cle rollover. must be replaced at your Toyota dealer. The pretensioners do not activate in the event of a minor frontal impact, a minor side impact or a rear impact.
Page 33: Srs Airbags
1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to cer- tain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. SRS airbag system Location of the SRS airbags ■...
Page 34 1-1. For safe use SRS curtain shield airbags • Can help protect primarily the head of occupants in the outer seats • Can help prevent the occupants from being thrown from the vehicle in the event of vehicle rollover SRS airbag system components ■...
Page 35 1-1. For safe use Driver airbag Front passenger occupant classification system (ECU and sen- sors) Knee airbag SRS warning light Airbag sensor assembly Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on information obtained from the sensors etc.
Page 36 1-1. For safe use be considerably higher in the follow- ■ Conditions under which the SRS airbags may deploy ing situations: (inflate), other than a collision • If the vehicle strikes an object, such as a parked vehicle or sign The SRS front airbags and SRS cur- pole, which can move or deform tain shield airbags may also deploy...
Page 37 When to contact your Toyota ● Collision from the side at an angle dealer In the following cases, the vehicle will require inspection and/or repair. Contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ●...
Page 38 1-1. For safe use vehicle was involved in an acci- ● The portion of the front pillars, rear dent that was not severe enough pillars or roof side rail garnishes to cause the SRS side and curtain (padding) containing the SRS cur- shield airbags to inflate.
Page 39 Toyota strongly recom- mends that all infants and chil- dren be placed in the rear seats of the vehicle and properly restrained.
Page 40 1-1. For safe use Do not allow anyone to kneel on ● WARNING the passenger seat toward the ● Do not sit on the edge of the door or put their head or hands seat or lean against the dash- outside the vehicle.
Page 41 If the areas where the SRS air- bags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ● Do not hang coat hangers or ●...
Page 42 1-1. For safe use WARNING ● Repairs, modifications, removal or replacement of the steering wheel, instrument panel, dash- board, seats or seat upholstery, front, side and rear pillars, roof side rails, front door panels, front door trims or front door speakers ●...
Page 43: Front Passenger Occupant Classification System
1-1. For safe use Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classification system. This system detects the conditions of the front passenger seat and activates or deactivates the front passenger airbag and seat cushion airbag in the front passen- ger side.
Page 44 Do not kick the front passenger seat or subject it to severe impact. Otherwise, the SRS warning light may come on to indicate a malfunction of the front passenger occupant clas- sification system. In this case, contact your Toyota dealer immediately.
Page 45 1-1. For safe use WARNING ● Child restraint systems installed on the rear seat should not con- tact the front seatbacks. ● Do not use a seat accessory, such as a cushion and seat cover, that covers the seat cushion surface. ●...
Page 46 1-1. For safe use Child ■ “AIR BAG OFF” “AIR BAG ON” and “AIR BAG OFF” or “AIR BAG indicator lights ON” Indicator/warn- ing light SRS warning light Driver’s and front passenger’s seat or flashing belt reminder light Deactivated or Front passenger airbag activated Devices...
Page 47 1-1. For safe use There is a malfunction in the system ■ “AIR BAG ON” and “AIR BAG OFF” “AIR BAG OFF” indicator lights Indicator/warn- SRS warning light ing light Driver’s and front passenger’s seat belt reminder light Front passenger airbag Devices Deactivated Front passenger seat cushion airbag...
Page 48: Exhaust Gas Precautions
Observe have the vehicle inspected and the following precautions. repaired by your Toyota dealer. Failure to do so may cause exhaust gases enter the vehicle and may lead to an accident...
Page 49: Child Safety
1-2. Child safety Riding with children 1-2.Child safety WARNING ■ When children are in the vehi- Observe the following pre- Never leave children unattended cautions when children are in the vehicle, and never allow in the vehicle. children to have or use the key. Use a child restraint system Children may be able to start the appropriate for the child,...
Page 50: Child Restraint Systems
1-2. Child safety Child restraint sys- Points to remember tems The laws of all 50 states of the U.S.A. as well as Canada now Before installing a child require the use of child restraint restraint system in the vehi- systems. cle, there are precautions ...
Page 51 1-2. Child safety WARNING ● Toyota strongly urges the use of a proper child restraint system that conforms to the weight and size of the child, installed on the rear seat. According to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 52 1-2. Child safety Child restraint system Types of child restraint system installation methods ■ Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt attachment P.54 Child restraint LATCH P.59 anchors attachment...
Page 53: Restraint System
1-2. Child safety When using a child WARNING restraint system ■ When using a child restraint system When installing a child ■ Observe the following precau- restraint system to a front tions. Failure to do so may result in passenger seat death or serious injury.
Page 54: Child Restraint Systems
1-2. Child safety When a booster seat is ● WARNING installed, always ensure that the ● A forward-facing child restraint shoulder belt is positioned system may be installed on the across the center of the child’s front passenger seat only when shoulder.
Page 55 1-2. Child safety manual enclosed with the child in lock mode. In lock mode, the belt cannot be extended. restraint system. Rear-facing  Infant ■ seat/convertible seat Adjust the rear seat. If there is a gap between the child restraint system and the seatback, adjust the seatback angle until good contact is achieved.
Page 56 1-2. Child safety buckle. Make sure that the When using the rear seat: If there is a gap between the child restraint belt is not twisted. system and the seatback, adjust the seatback angle until good con- tact is achieved. If the head restraint interferes with the child restraint system installation and the head...
Page 57 1-2. Child safety removed, remove the head check that it cannot be extended. restraint. (P.142) If the child restraint has a top tether strap, follow the child Place the child restraint sys- restraint manufacturer’s tem on the seat facing the operation manual regarding front of the vehicle.
Page 58 1-2. Child safety buckle. Make sure that the WARNING belt is not twisted. ■ When installing a child Check that the shoulder belt is cor- restraint system rectly positioned over the child’s Observe the following precau- shoulder and that the lap belt is as tions.
Page 59 1-2. Child safety Child restraint system WARNING fixed with a child restraint ● When securing some types of child restraint systems in rear LATCH anchor seats, it may not be possible to properly use the seat belts in Child restraint LATCH ■...
Page 60 1-2. Child safety remove the head restraint. With rigid lower attachments  (P.142) Latch the buckles onto the LATCH anchors. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower con- nector system. With flexible lower attach- ...
Page 61 1-2. Child safety When installing in the rear ■ Follow all installation instruc- ● center seat tions provided by the child restraint system manufacturer. There are no LATCH anchors ● Never attach two child restraint behind the rear center seat. system attachments to the However, the inboard LATCH same anchor.
Page 62 1-2. Child safety Outboard rear seats Outboard rear seats   Remove the head restraint. (P.142) Anchor brackets Top tether strap Latch the hook onto the Center rear seat  anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched.
Page 63 1-2. Child safety restraint system installation, install the head restraint. Hook Top tether strap Center rear seat  Adjust the head restraint to ■ Laws and regulations pertain- ing to anchors the upmost position. The LATCH system conforms to If the head restraint interferes with FMVSS225 or CMVSS210.2.
Page 64 1-2. Child safety WARNING ● Center rear seat: When install- ing the child restraint system with the head restraint being raised, after the head restraint has been raised and then the anchor bracket has been fixed, do not lower the head restraint.
Page 65: Emergency Assistance
Toyota.com in the United States, Toyotapr.com in Puerto Rico and Toyota.ca in Canada. All use of the Safety Connect service is subject to such then-applicable Terms and Conditions.
Page 66 1-3. Emergency assistance ■ Certification for the Safety Connect Helps drivers receive necessary Services response from emergency service P.68 providers. ( Subscribers have the following : U.S. Patent No. 7,508,298 B2 Safety Connect services avail- able:  Stolen Vehicle Location ...
Page 67 A variety of subscription terms Rico and Canada. are available for purchase. Con- ● Automatic Collision Notification, tact your Toyota dealer, call the Emergency Assistance, Stolen Vehicle and Enhanced Road following appropriate Safety Assistance are not available in the Connect response center or U.S.
Page 68 Automatic Collision Notifi- ■ Further information is available cation at Toyota.com in the United In case of either airbag deploy- States, Toyotapr.com in Puerto ment or severe rear-end colli- Rico and Toyota.ca in Canada. sion, the system is designed to Emergency Assistance But- ■...
Page 69 Safety Connect Terms and Those standards were based on Conditions, which are available comprehensive and periodic at Toyota.com in the United evaluations of the relevant sci- States, Toyotapr.com in Puerto entific literature. Over 120 scien- Rico and Toyota.ca in Canada.
Page 70: 1-4. Theft Deterrent System
1-4. Theft deterrent system Engine immobilizer 1-4.Theft deterrent system system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously registered Vehicles with smart key sys- in the vehicle’s on-board ...
Page 71 1-4. Theft deterrent system ■ Certification for the engine immobilizer system For vehicles sold in the U.S.A., Hawaii, American Samoa, Guam, Saipan  and Puerto Rico For vehicles sold in Canada ...
Page 72 1-4. Theft deterrent system NOTICE ■ To ensure the system oper- ates correctly Do not modify or remove the sys- tem. If modified or removed, the proper operation of the system cannot be guaranteed.
Page 73: Alarm
1-4. Theft deterrent system oramic moon roof (if Alarm equipped) are closed before the alarm is set. : If equipped  No valuables or other per- The alarm uses light and sonal items are left in the sound to give an alert when vehicle.
Page 74 1-4. Theft deterrent system (Stopping the alarm deactivates the alarm system.) ● A person inside the vehicle opens a door or hood, or unlocks the vehicle using an inside lock but- ton. ● The battery is recharged or replaced when the vehicle is locked.
Page 75: Vehicle Status Information
Vehicle status informa- tion and indicators 2-1. Instrument cluster Warning lights and indica- tors .......76 Gauges and meters (with 4.2-inch display) ...82 Gauges and meters (with 7- inch display) ....85 Multi-information display Fuel consumption informa- tion .......99...
Page 76: 2-1. Instrument Cluster
2-1. Instrument cluster Warning lights and indicators 2-1.Instrument cluster The warning lights and indicators on the instrument cluster, center panel and outside rear view mirrors inform the driver of the status of the vehicle’s various systems. Instrument cluster For the purpose of explanation, the following illustrations display all warning lights and indicators illuminated.
Page 77 2-1. Instrument cluster When analog speedometer is displayed  The units used on the meters and some indicators may differ depending on the target region. When digital speedometer is displayed  The units used on the meters and some indicators may differ depending on the target region.
Page 78 2-1. Instrument cluster Intuitive parking assist Brake system warn- OFF indicator ing light (P.622) equipped) (P.625) (Yellow) (Flashes) Charging system PKSB OFF indica- warning light (if equipped) (P.622) (P.626) High coolant tempera- RCTA OFF indicator ture warning light (if equipped) (P.626) (P.623) (Flashes) Low engine oil pres-...
Page 79 Have the vehicle Turn signal indicator inspected by your Toyota dealer. (P.204) : This light illuminates on the Headlight indicator multi-information display with a (P.210)
Page 80 Parking brake indicator the lights do not turn on, or turn (P.205) off. Have the vehicle inspected (Canada) by your Toyota dealer. Eco drive mode indicator : This light illuminates on the out- (P.353) side rear view mirrors.
Page 81: Instrument Cluster
If the BSM outside rear view mirror indicators do not illuminate or do not turn off, there may be a malfunction in the system. If this occurs, have the vehicle inspected by your Toyota dealer.
Page 82: Gauges And Meters (With 4.2-Inch Display)
2-1. Instrument cluster Gauges and meters (with 4.2-inch display) The meters display various drive information. Meter display The units used on the meter and display may differ depending on the target region. Tachometer Displays the engine speed in revolutions per minute Outside temperature (P.83) Clock (P.84) Multi-information display...
Page 83 ● When “--” or “E” is displayed, the an accident resulting in death or system may be malfunctioning. injury. Take your vehicle to your Toyota dealer. ● Displays the outside temperature NOTICE within the range of -40°F (-40°C) ■...
Page 84 2-1. Instrument cluster levels when the tail lights are on and Using the “ODO TRIP” off can be adjusted individually. switch However, when the surroundings are bright (daytime, etc.), turning on the tail lights will not change the Switches the items of the odom- instrument cluster brightness.
Page 85: Gauges And Meters (With 7-Inch Display)
2-1. Instrument cluster Gauges and meters (with 7-inch display) The meters display various drive information. Meter display The display of the speedometer can be selected from two types, analog or digital. (P.94) Analog speedometer  The units used on the meter and display may differ depending on the target region.
Page 86 2-1. Instrument cluster Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently. Outside temperature (P.87) Multi-information display Presents the driver with a variety of driving-related data (P.89) Displays warning messages if a malfunction occurs (P.633) Shift position and shift range indicator Displays the selected shift position or selected shift range (P.200)
Page 87 When “--” or “E” is displayed, the on the display. This lag could system may be malfunctioning. cause the driver to downshift Take your vehicle to your Toyota again, causing rapid and exces- dealer. sive engine braking and possibly ●...
Page 88 2-1. Instrument cluster NOTICE ■ To prevent damage to the engine and its components ● Do not let the indicator needle of the tachometer enter the red zone, which indicates the maxi- mum engine speed. ● The engine may be overheating if the engine coolant tempera- ture gauge is in the red zone Brighter...
Page 89: Multi-Information Display
2-1. Instrument cluster • Dynamic radar cruise control with Multi-information dis- full-speed range (P.252) play Menu icons (P.90) The multi-information dis- Information display area play is used to display fuel A variety of information can be dis- efficiency related informa- played by selecting a menu icon.
Page 90 2-1. Instrument cluster history display (if equipped) ■ The multi-information display is Linked with the hands-free displayed when system, sending or receiving The engine switch is in ON. call is displayed. For details ■ When changing driving mode regarding the hands-free sys- ●...
Page 91 2-1. Instrument cluster Fuel Economy ■ Icon Display Following information is dis- Driving information dis- played. play (P.91) Driving support system information display (P.93) Audio system-linked dis- play (P.93) Vehicle information dis- play (P.93) Distance to empty Settings display (P.94) Displays the driving range with remaining fuel.
Page 92 2-1. Instrument cluster Eco Driving Indicator/Dis- Display ■ tance to empty Suggests the Zone of Eco driving with current Eco driving ratio based Display contents  on acceleration. Eco driving ratio based on acceleration If the acceleration exceeds Zone of Eco driving, the right side of Eco Driving Indicator Zone Display will illuminate.
Page 93 2-1. Instrument cluster changes according to the “Drive Driving support system Info Type” setting (since the sys- information display tem was started or between resets). (P.94) Driving support system ■ information display Use the displayed information as a reference only. Select to display the operational status of the following systems: Following items will be displayed.
Page 94 2-1. Instrument cluster AWD system display (AWD Setting procedure ■ ■ models) Operate of the meter control switches and select Operate of the meter control switches and select the desired item. • If the function is turned on and off or the volume, etc. is changed on the setting Torque distribution display screen, the setting is changed...
Page 95 2-1. Instrument cluster  “Sensitivity” (Intuitive parking ■ assist) (if equipped) Select to set the lane departure alert sensitivity. (P.272)  “Sway Warning” Select to set up the following items. Select to enable/disable the vehicle sway warning.  Intuitive parking assist on/off ...
Page 96 • “Kick Sensor” set of tire pressure warning system sensor ID codes must be registered Select to enable/disable the kick by a Toyota dealer. For information sensor. regarding changing the registered • “Opening Adjustment” ID code set, contact your Toyota Select the open position when dealer.
Page 97 2-1. Instrument cluster  “Units” • Intersection guidance display of the navigation system-linked sys- Select to change the units of mea- tem (if equipped) sure displayed. • Incoming call display of the  “Meter Type” (7-inch display) hands-free phone system Select to change the speedometer •...
Page 98 2-1. Instrument cluster dark, a suggestion message will WARNING be displayed. ■ Cautions during setting up Suggestion to turn off the ■ the display headlights As the engine needs to be run- ning during setting up the display, If the headlights are left on for a ensure that the vehicle is parked certain amount of time after the in a place with adequate ventila-...
Page 99: Fuel Consumption Information
2-1. Instrument cluster Select “ECO” on the “Infor- Fuel consumption mation” screen. information If the “History” screen is displayed, select “Trip information”. : If equipped The image is an example only, and The fuel consumption infor- may vary slightly from actual condi- mation can be displayed on tions.
Page 100 2-1. Instrument cluster History Plus: ■ Displays the daily average fuel con- Entune Audio or Entune  sumption. (Instead of the date, “Trip Audio Plus (vehicles without 1” through “Trip 5” will be dis- Data Communication Module) played.) Press the “MENU” button. •...
Page 101: Before Driving
Before driving 3-1. Key information Keys ......3-2. Opening, closing and locking the doors Side doors....Back door....Smart key system ..3-3. Adjusting the seats Front seats ....Rear seats....Driving position memory ........Head restraints.... 3-4. Adjusting the steering wheel and mirrors Steering wheel ....
Page 102: Key Information Keys
3-1. Key information Keys 3-1.Key information Key number plate ■ When riding in an aircraft Key types When bringing a key with wireless remote control function onto an air- The following keys are provided craft, make sure you do not press with the vehicle.
Page 103 The number of keys already regis- You can replace the battery by your- tered to the vehicle can be con- self (P.594). However, as there is firmed. Ask your Toyota dealer for a danger that the electronic key may details. be damaged, it is recommended ■...
Page 104: Wireless Remote Control
(P.109) with the key, causing the key to : This setting must be customized not function properly. at your Toyota dealer. ■ In case of a smart key system Vehicles with smart key sys- malfunction or other key- ...
Page 105 3-1. Key information Opens and closes the power back door (P.119) Sounds the alarm (P.105) : These settings must be custom- ized at your Toyota dealer. : If equipped ■ Conditions affecting operation Vehicles without smart key system  ■...
Page 106 3-1. Key information ■ Certification for wireless remote control...
Page 107 3-1. Key information position while pressing the button. Using the master key (vehicles without smart Using the mechanical key key system) (vehicles with smart key system) To take out the mechanical key, slide the release lever take the key out. The mechanical key can only be inserted in one direction, as the key only has grooves on one side.
Page 108 3-1. Key information key battery is depleted or the entry function does not operate properly, you will need the mechanical key. (P.647) ■ If you lose your keys P.646 ■ If a wrong key is used The key cylinder rotates freely to isolate inside mechanism.
Page 109 : This setting must be customized Grip the front passenger’s at your Toyota dealer. door handle or rear door han- dle (some models) to unlock all the doors Make sure to touch the sensor on the back of the handle.
Page 110 Turn and hold to open the side win- dows. : These settings must be custom- ized at your Toyota dealer. Vehicles with smart key sys-  The doors can also be locked Locks all the doors...
Page 111 3-2. Opening, closing and locking the doors are operating using the wireless Multi-informa- Unlocking func- remote control. tion dis- tion ■ Security feature play/Beep Vehicles without smart key system  Holding the If a door is not opened within driver’s door han- approximately 60 seconds after the dle unlocks only vehicle is unlocked using the wire-...
Page 112 3-2. Opening, closing and locking the doors vehicle once more. Do not pull the inside handle of ● the doors while driving. ■ Setting the alarm (if equipped) Be especially careful for the Locking the doors will set the alarm front doors, as the doors may system.
Page 113 3-2. Opening, closing and locking the doors Vehicles with smart key system  Unlocking and locking the The door cannot be locked if the doors from the inside engine switch is in ACC or ON, or the electronic key is left inside the Using the door lock switch ■...
Page 114 3-2. Opening, closing and locking the doors Function Operation All doors are automatically Speed linked locked when door locking vehicle speed is function approximately 12mph (20 km/h) or higher. All doors are automatically Shift position locked when linked door lock- shifting the shift ing function lever to position...
Page 115: Back Door
3-2. Opening, closing and locking the doors Back door Never let anyone sit in the lug- ● gage compartment. In the event of sudden braking, The back door can be sudden swerving or a collision, they are susceptible to death or locked/unlocked and serious injury.
Page 116 When installing an shut if it is not opened fully, accessory part to the back door, while on a steep incline. Make using a genuine Toyota part is sure that the back door is recommended. secured before using the lug- gage compartment.
Page 117: Power Back Door
3-2. Opening, closing and locking the doors electronic key, the key may be detected as being in the vehicle. In this case, vehicle may be unlocked.) Unlocking and locking the back door from the inside Using the door lock switch ■...
Page 118 3-2. Opening, closing and locking the doors Turn the cover. ■ Luggage compartment light The luggage compartment light turns on when the back door is opened with the luggage compart- ment light switch on. When the engine switch is turned to OFF, the light will go off automati- Move the lever.
Page 119 Pressing the switch while the power back door is opening/closing stops ● Do not attach any accessories other than genuine Toyota parts the operation. When the switch is to the back door. pressed again during the halted operation, the back door will per- Do not place your hand on the ●...
Page 120 3-2. Opening, closing and locking the doors opener switch. Using the back door han- ■ dles When the back door is locked: While carrying the electronic key Lower the back door using the on your person, press the back back door handle door opener switch.
Page 121 3-2. Opening, closing and locking the doors (30 to 50 cm) from the rear mal for the operation to occur. bumper. Kick sensor Kick sensor Hands Free Power Back Door operation detection Hands Free Power Back area Door operation detection area When the sensor detects that your foot is pulled back, a...
Page 122 3-2. Opening, closing and locking the doors ■ Back door closer In the event that the back door is left slightly open, the back door closer will automatically close it to the fully closed position. Whatever the state of the engine ■...
Page 123 3-2. Opening, closing and locking the doors the jam protection function, etc., too close to the rear bumper while the back door is automati- ● When an external radio wave cally closing after a door reserve source interferes with the commu- lock operation is performed, the nication between the electronic door reserve lock function is can-...
Page 124 3-2. Opening, closing and locking the doors ● When a small animal or small object, such as a ball, moves under the rear bumper ● When an object is moved from under the rear bumper ● If someone is swinging their legs while sitting on the rear bumper ●...
Page 125 When installing an accessory part to the back door, using a genuine Toyota part is recom- mended.
Page 126 Failure to do so may cause death ● Do not attach heavy accesso- or serious injury. ries to the back door. When attaching, ask your Toyota ● Check the safety of the sur- dealer for details. rounding area to make sure...
Page 127 Do not apply excessive force to sor operates. If it does not oper- the back door while the power ate, have the vehicle inspected back door is operating. by your Toyota dealer. ● Take care not to damage the sensors (installed on the right ●...
Page 128 3-2. Opening, closing and locking the doors that position. Changing settings of the power back door system (vehicles with power back door) The settings of the power back door system can be changed by displaying the “Vehicle Set- tings” - “PBD” screen from the screen of the multi-informa- ■...
Page 129: Smart Key System
3-2. Opening, closing and locking the doors ■ Effective range (areas within Smart key system which the electronic key is detected) : If equipped The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket.
Page 130 3-2. Opening, closing and locking the doors ● When an exterior alarm sounds mechanical key, to unlock the once for 5 seconds doors. ■ Turning an electronic key to Correction pro- Situation battery-saving mode cedure ● When battery-saving mode is set, An attempt was battery depletion is minimized by Close all of the...
Page 131 3-2. Opening, closing and locking the doors tact with, or is covered by the fol- started or engine switch modes lowing metallic objects are changed. • Cards to which aluminum foil is ● Do not leave the electronic key on attached top of the instrument panel or near •...
Page 132 3-2. Opening, closing and locking the doors the effective range, the door may ■ To operate the system properly lock and unlock repeatedly. In that Make sure to carry the electronic case, follow the following correc- key when operating the system. Do tion procedures to wash the vehi- not get the electronic key too close cle:...
Page 133 3-2. Opening, closing and locking the doors ■ Certification for the smart key system For vehicles sold in the U.S.A., Hawaii, American Samoa, Guam, Saipan  and Puerto Rico For vehicles sold in Canada ...
Page 134 (P.129) The radio waves may affect the Ask your Toyota dealer for details operation of such devices. If on disabling the entry function. necessary, the entry function can be disabled. Ask your Toy-...
Page 135: Adjusting The Seats
3-3. Adjusting the seats Power seat (driver’s side Front seats 3-3.Adjusting the seats  only) The seats can be adjusted (longitudinally, vertically, etc.). Adjust the seat to ensure the correct driving posture. Adjustment procedure Manual seat  Seat position adjustment switch Seatback angle adjustment switch...
Page 136: Rear Seats
3-3. Adjusting the seats Rear seats WARNING ● Do not put your hands under the seat or near the moving parts to Reclining adjustments and avoid injury. folding the seatbacks can Fingers or hands may become be done with lever opera- jammed in the seat mechanism.
Page 137 3-3. Adjusting the seats Stow the armrest of the rear WARNING seat if it is pulled out. ● After adjusting the seat, make (P.540) sure that the seat is locked in position. This step is not necessary when operating the left side seat only. If the seatback is not securely locked, the red marking will be Folding down the seat-...
Page 138 3-3. Adjusting the seats Check that the seat belts are ● WARNING not twisted or caught in the Observe the following precau- seatback. tions. Failure to do so may result in death or serious injury. ■ When folding the rear seat- backs down ●...
Page 139: Driving Position Memory
3-3. Adjusting the seats ten. Driving position mem- : If equipped This feature automatically adjusts the driver’s seat to suit your preferences. Your preferred driving posi- tion (the position of the Recall procedure ■ driver’s seat) can be Check that the shift lever is in recorded and recalled by pressing a button.
Page 140 3-3. Adjusting the seats driver’s door. ■ Operating the driving position memory after turning the If 2 or more keys are in the vehi- engine switch to OFF cle, the driving position cannot Recorded seat positions can be be recorded properly. activated up to 180 seconds after the driver’s door is opened and Check that the shift lever is in...
Page 141: Head Restraints
3-3. Adjusting the seats that has already been recorded, the Head restraints seat will not move. Cancelation procedure ■ Head restraints are provided Carry only the key you want to for all seats. cancel and then close the driver’s door. WARNING If 2 or more keys are in the vehi- ■...
Page 142 3-3. Adjusting the seats Center rear seat ■ Removing the head restraints Pull the head restraint up while pressing the lock release button If the head restraint touches the ceiling, making the removal difficult, change the seat height or angle. (P.135) Pull the head restraints up.
Page 143 3-3. Adjusting the seats Outboard rear seats ■ Align the head restraint with the installation holes and push it down to the lowest lock position.
Page 144: Adjusting The Steering
3-4. Adjusting the steering wheel and mirrors Steering wheel 3-4.Adjusting the steering wheel and mirrors After adjusting the steering ■ wheel Make sure that the steering wheel Adjustment procedure is securely locked. Otherwise, the steering wheel Hold the steering wheel and may move suddenly, possibly causing an accident, and resulting push the lever down.
Page 145: Inside Rear View Mirror
3-4. Adjusting the steering wheel and mirrors Inside rear view mir- Anti-glare function (vehi- cles with manual anti- glare inside rear view mir- : If equipped ror) The rear view mirror’s posi- Reflected light from the head- tion can be adjusted to lights of vehicles behind can be enable sufficient confirma- reduced by operating the lever.
Page 146 3-4. Adjusting the steering wheel and mirrors Vehicles without garage door Vehicles with garage door opener   opener Vehicles with garage door  opener ■ To prevent sensor error (vehi- cles with auto anti-glare inside rear view mirror) To ensure that the sensors operate properly, do not touch or cover them.
Page 147: Digital Rear-View Mirror146
3-4. Adjusting the steering wheel and mirrors Digital Rear-view Mir- • Change to digital mirror mode and adjust the display settings. ● As the range of the image dis- played by the Digital Rear-view : If equipped Mirror is different from that of The Digital Rear-view Mirror the optical mirror, make sure to check this difference before...
Page 148 3-4. Adjusting the steering wheel and mirrors optical mirror mode. shade for the panoramic moon roof (if equipped). ● Any of the following conditions may occur when driving in the dark, such as at night. None of them indicates that a malfunction has occurred.
Page 149 3-4. Adjusting the steering wheel and mirrors Press of the select buttons to select and press the menu/enter button. The icons will disappear. Icons Settings Select to enable/disable the automatic anti-glare func- Display settings (digital mir- ■ tion. ror mode) Responding to the bright- Settings of the display in the dig- ness of the headlights of...
Page 150 3-4. Adjusting the steering wheel and mirrors played. Icons Settings Select to zoom in/out the displayed image. Select to enable/disable the PLS (point light source) mode. The glare from the head- lights of vehicles behind is reduced to help ensure an image on the display in the Press of the...
Page 151 3-4. Adjusting the steering wheel and mirrors ficult to see. Clean the mirror surface gently using a soft dry cloth. Cleaning the camera ■ If the camera lens is dirty, the displayed image may not be clear. In this case, clean it with a WARNING soft cloth dampened with water.
Page 152 If this happens, have the vehicle inspected by your Toyota dealer as soon as possible. If you notice any symptoms If you notice any of the following symptoms, refer to the following table for the likely cause and the solution.
Page 153 3-4. Adjusting the steering wheel and mirrors Symptom Likely cause Solution Clean the mirror surface The mirror surface is gently, using a soft dry dirty. cloth. Change to optical mirror mode. Sunlight or headlights (If the light is coming are shining directly into through the moon roof [if the Digital Rear-view equipped] or panoramic...
Page 154 Toyota dealer. The display is dim and Change to optical mirror The system may be mal- mode and have the vehi- is displayed.
Page 155 Rear-view Mirror will does not disap- turn off.) pear even though the mirror is cool, have the vehicle inspected by your Toyota dealer. Change to optical mirror mode and have the vehi- cle inspected by your Toyota dealer. The lever cannot be...
Page 156: Outside Rear View Mirrors
3-4. Adjusting the steering wheel and mirrors Outside rear view mir- Adjustment procedure rors To select a mirror to adjust, press the switch. The rear view mirror’s posi- tion can be adjusted to enable sufficient confirma- tion of the rear view. ■...
Page 157 3-4. Adjusting the steering wheel and mirrors WARNING ■ When a mirror is moving To avoid personal injury and mir- ror malfunction, be careful not to get your hand caught by the mov- ing mirror.
Page 158: Opening, Closing The Win
3-5. Opening, closing the windows and moon roof window frame while the side window Power windows 3-5.Opening, closing the windows and moon roof is closing, side window movement is stopped and the side window is opened slightly. Opening and closing the ■...
Page 159 (P.73) their body in a position where it : These settings must be custom- could be caught when a power ized at your Toyota dealer. window is being operated. ■ Power window open reminder function Vehicles without smart key system ...
Page 160 3-5. Opening, closing the windows and moon roof Preventing accidental WARNING operation (window lock ● When using the wireless remote control, key or mechanical key switch) and operating the power win- dows, operate the power win- This function can be used to dow after checking to make prevent children from acciden- sure that there is no possibility...
Page 161: Moon Roof
Vehicles with alarm: The alarm may be triggered if the alarm is set and the moon roof is closed using the door lock linked moon roof operation function. (P.73) : These settings must be custom- ized at your Toyota dealer.
Page 162 ■ Opening the moon roof cle inspected by your Toyota dealer. ● Do not allow any passengers to ■ If the moon roof does not move put their hands or head outside normally the vehicle while it is moving.
Page 163 3-5. Opening, closing the windows and moon roof The jam protection function may ● WARNING not work if something gets ● Check to make sure that all pas- caught just before the moon sengers do not have any part of roof is fully closed.
Page 164: Panoramic Moon Roof
3-5. Opening, closing the windows and moon roof Panoramic moon roof switch in either direction to stop the electronic sunshade : If equipped partway. Use the overhead switches Tilting the panoramic moon ■ to operate the panoramic roof up and down moon roof and electronic sunshade.
Page 165 (P.73) : These settings must be custom- ■ The panoramic moon roof can ized at your Toyota dealer. be operated when ■ When the panoramic moon roof The engine switch is in ON. or electronic sunshade does ■...
Page 166 ● Do not allow any passengers to cle inspected by your Toyota dealer. put their hands or head outside the vehicle while it is moving. ■ Panoramic moon roof open reminder function ●...
Page 167 3-5. Opening, closing the windows and moon roof Jam protection function ■ WARNING ● Never use any part of your body ● Check to make sure that all pas- to intentionally activate the jam sengers do not have any part of protection function.
Page 168 3-5. Opening, closing the windows and moon roof...
Page 169: Driving
Driving 4-5. Using the driving support 4-1. Before driving systems Driving the vehicle..Toyota Safety Sense 2.0 Cargo and luggage ........Vehicle load limits ..PCS (Pre-Collision System) Trailer towing..........Dinghy towing ..... LTA (Lane Tracing Assist) 4-2. Driving procedures ........
Page 170 Multi-terrain Select (AWD vehicles) ....Snow mode switch ..Downhill assist control sys- tem ......Driving assist systems 4-6. Driving tips Winter driving tips ..Utility vehicle precautions ........
Page 171 4-1. Before driving Set the parking brake Driving the vehicle 4-1.Before driving (P.204), and shift the shift lever to P (P.199). The following procedures Turn the engine switch to should be observed to OFF to stop the engine. ensure safe driving: Lock the door, making sure that you have the key on your Driving procedure...
Page 172 Select. while driving. This is due to auto- matic up-shifting control or down- ■ Breaking in your new Toyota shifting implementation to meet driv- To extend the life of the vehicle, ing conditions. It does not indicate observing the following precautions sudden acceleration.
Page 173 4-1. Before driving During normal driving, do not ● WARNING turn off the engine. Turning the ■ When driving the vehicle engine off while driving will not cause loss of steering or brak- ● Do not drive if you are unfamil- ing control, but the power assist iar with the location of the brake to these systems will be lost.
Page 174 Do not let the vehicle roll back- Have the brake pads checked and ward while the shift lever is in a replaced by your Toyota dealer as driving position, or roll forward soon as possible. while the shift lever is in R.
Page 175 4-1. Before driving When the vehicle is parked ■ WARNING ● Do not leave glasses, cigarette ■ When the vehicle is stopped lighters, spray cans, or soft ● Do not race the engine. drink cans in the vehicle when it If the vehicle is in any gear other is in the sun.
Page 176 4-1. Before driving If the brake booster device does ● WARNING not operate, do not follow other ● Always apply the parking brake, vehicles closely and avoid hills shift the shift lever to P, stop the or sharp turns that require brak- engine and lock the vehicle.
Page 177 4-1. Before driving Changes in quantity and quality ● NOTICE of oil and fluid used for the ■ Avoiding damage to vehicle engine, transaxle, transfer parts (AWD vehicles), rear differen- tial (AWD vehicles), etc. ● Do not turn the steering wheel fully in either direction and hold ●...
Page 178: Cargo And Luggage
4-1. Before driving Cargo and luggage Secure all items in the occupant ● compartment. ● When you fold down the rear Take notice of the following seats, long items should not be information about storage placed directly behind the front precautions, cargo capacity seats.
Page 179 4-1. Before driving For example, if the “XXX” Calculation formula for amount equals 1400 lbs. and your vehicle there will be five 150 lb passen- gers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400 - 750 (5 ...
Page 180 4-1. Before driving load If driving for a long distance, on ● rough roads, or at high speeds, As shown in the example above, stop the vehicle now and then if the number of occupants during the trip to make sure the increases, the cargo and lug- cargo remains in its place.
Page 181: Vehicle Load Limits
4-1. Before driving Vehicle load limits WARNING ■ Overloading the vehicle Vehicle load limits include Do not overload the vehicle. It may not only cause damage to total load capacity, seating the tires, but also degrade steer- capacity, TWR (Trailer ing and braking ability, resulting in Weight Rating) and cargo an accident.
Page 182: Trailer Towing
Tow- ing a trailer can have an Contact your Toyota dealer for adverse impact on handling, further information about addi- performance, braking, dura- tional requirements such as a bility, and fuel consumption.
Page 183 ● If the gross trailer weight your vehicle speed under the exceeds unbraked TWR, trailer speed of which you experience brakes are required. Toyota rec- the instability. ommends trailers with brakes that conform to all applicable ● Do not make jerky, abrupt or federal and state/provincial reg- sharp turns.
Page 184 4-1. Before driving Vehicles with towing package  WARNING ● Never tap into your vehicle’s hydraulic system, as this will lower the vehicle’s braking effectiveness. ● Never tow a trailer without using a safety chain securely attached to both the trailer and the vehi- cle.
Page 185 4-1. Before driving Vehicles with towing package Vehicles with towing package   GAWR (Gross Axle Weight ■ Rating) The maximum allowable gross axle weight. The gross axle Front GAWR weight is the load placed on each axle (front and rear). Rear GAWR Vehicles without towing pack- ...
Page 186 4-1. Before driving Vehicles without towing pack- Tongue Weight ■  The load placed on the trailer hitch ball. (P.188) Vehicles without towing pack-  (With brakes) Vehicles with towing package  Vehicles with towing package  (With brakes) Unbraked TWR (Unbraked ■...
Page 187 4-1. Before driving weight, gross vehicle weight, Vectoring AWD system: 6110 lb. (2770 kg) gross axle weight and tongue weight are all within the limits. Vehicles with Dynamic Torque Vec- toring AWD system: 6205 lb. (2815 GCWR ■ Without towing package ...
Page 188 Vehicles without towing pack-  vehicle. For details, contact your Toyota dealer.  If you wish to install a trailer hitch, contact your Toyota dealer.  Use only a hitch that con- forms to the gross trailer weight requirement of your vehicle.
Page 189 ■ When installing a trailer hitch 1 7/8 in. Use only the position recom- mended by your Toyota dealer. Do not install the trailer hitch on Positions for towing hitch the bumper; this may cause body receiver and hitch ball damage.
Page 190: Trailer Towing Tips
 Speed limits for towing a trailer vary by state or prov- ince. Do not exceed the posted towing speed limit.  Toyota recommends that the vehicle-trailer speed limit is 65 mph (104 km/h) on a flat, straight, dry road. Do not...
Page 191 4-1. Before driving left. Move your hand to the  Take care when passing other right to move the trailer to vehicles. Passing requires right. (This is generally oppo- considerable distance. After site to reversing without a passing a vehicle, do not for- trailer attached.) Avoid sharp get the length of your trailer, or prolonged turning.
Page 192 (such as an engine, transmis- able, do so only after sion, differential or wheel bearing), performing the following: Toyota recommends that you do not tow a trailer until the vehicle has Apply the brakes and keep been driven for over 500 miles (800 them applied.
Page 193: Dinghy Towing
4-1. Before driving Do not increase speed. Do not Dinghy towing apply vehicle brakes. If you make no extreme correction Your vehicle is not designed with the steering or brakes, your to be dinghy towed (with 4 vehicle and trailer should stabilize (if enabled, Trailer Sway Control can wheels on the ground) also help to stabilize the vehicle and...
Page 194 4-1. Before driving NOTICE AWD models: Never tow this vehi- cle with any of the wheels on the ground. This may cause serious damage to the transmission and AWD system.
Page 195: Driving Procedures
If the engine does not start Toyota dealer immediately. The engine immobilizer system may not have been deactivated. (P.70) Changing the engine Contact your Toyota dealer. switch positions ■ When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in OFF.
Page 196: Engine (Ignition) Switch (Vehicles With Smart Key System)
4-2. Driving procedures as the audio system can be used. Engine (ignition) switch (vehicles with ON (“ON” position) smart key system) All electrical components can be used. START (“START” position) Performing the following operations when carrying For starting the engine. the electronic key on your person starts the engine or ■...
Page 197 ■ If the battery is discharged be malfunctioning. Have the vehicle inspected by your Toyota dealer The engine cannot be started using immediately. the smart key system. Refer to P.649 to restart the engine.
Page 198: Stopping The Engine
● If the engine switch is operated sticking slightly, there may be a while the vehicle is running, a malfunction. Contact your Toyota warning message will be shown dealer immediately. on the multi-information display and a buzzer sounds.
Page 199 4-2. Driving procedures Changing engine switch ■ Auto power off function modes If the vehicle is left in ACC for more than 20 minutes or ON (the engine Modes can be changed by is not running) for more than an hour with the shift lever in P, the pressing the engine switch with engine switch will automatically turn...
Page 200: Automatic Transmission199
4-2. Driving procedures press the engine switch Automatic transmis- shortly and firmly. sion Check that “ACCESSORY” or “IGNITION ON” on the Select the shift position multi-information display is depending on your purpose off. and situation. NOTICE Shift position purpose ■ To prevent battery discharge and functions Do not stop the engine when the...
Page 201 When the warning message goes out, the vehicle can be driven again. If the warning message does not go out after waiting a while, have your vehicle inspected by your Toyota While the engine switch dealer. is in ON and the brake pedal ■...
Page 202 Have brake pedal when the shift lock the vehicle inspected by your Toyota override button is pressed and the dealer immediately. shift lever is shifted out of P, the...
Page 203 S8 will be displayed on the multi- Have the vehicle inspected by your information display. Toyota dealer immediately. (In this situation, the transmission will oper- The initial shift range in S mode ate in the same manner as when the is set automatically to 4, 5 or 6 shift lever is in D.)
Page 204: Turn Signal Lever
4-2. Driving procedures burned out. Turn signal lever ■ If the turn signals stop flashing before a lane change has been Operating instructions performed Operate the lever again. ■ To discontinue flashing of the turn signals during a lane change Operate the lever in the opposite direction.
Page 205: Parking Brake
4-2. Driving procedures The parking brake indicator light Parking brake and parking brake lamp will turn on. Pull and hold the parking brake The parking brake can be switch if an emergency occurs and set or released automati- it is necessary to operate the park- cally or manually.
Page 206 Operate the parking brake switch. If the message does not disappear after operating the switch several times, the system may be malfunc- tioning. Have the vehicle inspected by your Toyota dealer. ■ Parking brake operation sound When the parking brake operates, a ■...
Page 207 4-2. Driving procedures Not in ON: Stays on for approxi- NOTICE mately 15 seconds. ■ When parking the vehicle ● When the engine switch is turned off with the parking brake set, the Before you leave the vehicle, shift parking brake indicator light will the shift position to P, set the park- stay on for about 15 seconds.
Page 208: Brake Hold
4-2. Driving procedures ● The driver is not wearing the seat Brake Hold belt. If any of the conditions above are The brake hold system detected when the brake hold sys- tem is enabled, the system will turn keeps the brake applied off and the brake hold standby indi- when the shift lever is in D, cator light will go off.
Page 209 Have NOTICE the vehicle inspected at your Toyota ■ When parking the vehicle dealer. The brake hold system is not ■...
Page 210: 4-3. Operating The Lights And Wipers
4-3. Operating the lights and wipers on and off automatically. Headlight switch 4-3.Operating the lights and wipers (U.S.A.) Off (Can- ada) The daytime running The headlights can be oper- lights turn on. (P.209) ated manually or automati- cally. Type B ...
Page 211 4-3. Operating the lights and wipers the low beam headlight lights, and illuminate dimmer than the low beam headlight lights. ● Vehicles with projector head- lights: The daytime running lights illuminate using the same lights as the parking lights and illuminate brighter than the parking lights.
Page 212 You can flash the high beams with the headlights on or off. The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer. ■ Customization Settings (e.g. light sensor sensitiv- ity) can be changed. (Customizable features: P.687) NOTICE ■...
Page 213: Automatic High Beam
4-3. Operating the lights and wipers Push the lever away from Automatic High Beam you with the headlight switch in the position. The Automatic High Beam uses an in-vehicle camera The Automatic High Beam indicator will come on when the system is sensor to assess the bright- operating.
Page 214 4-3. Operating the lights and wipers • When the vehicle is cut in front of • The windshield is obscured by by another vehicle fog, mist, ice, dirt, etc. • When vehicles ahead are hidden • The windshield is cracked or dam- from sight due to repeated curves, aged road dividers or roadside trees...
Page 215 If “Headlight System Malfunc- tion Visit Your Dealer” is dis- played on the multi-information display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer. ■ Temporarily lowering sensor sensitivity The sensitivity of the sensor can be temporarily lowered.
Page 216: Fog Light Switch
4-3. Operating the lights and wipers Fog light switch Windshield wipers and washer : If equipped The fog lights offer Operating the lever can improved visibility in diffi- switch between automatic cult driving conditions, operation and manual oper- such as in rain and fog. ation, or can use the washer.
Page 217 4-3. Operating the lights and wipers Rain-sensing windshield wip-  High speed operation Temporary operation : For the U.S.A. : For Canada If equipped, wiper intervals can be adjusted when intermittent operation is selected. Rain-sensing opera- tion Low speed Increases the intermittent operation windshield wiper frequency High speed...
Page 218 4-3. Operating the lights and wipers ● If the wiper switch is turned to the “AUTO” position while the engine switch is in ON, the wipers will Increases the sensitivity operate once to show that “AUTO” Decreases the sensitivity mode is activated. ●...
Page 219: Rear Window Wiper And Washer
■ When a nozzle becomes Operating the switch blocked operates the rear wiper as fol- In this case, contact your Toyota lows: dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 220 Washer/wiper dual ■ When a nozzle becomes operation blocked In this case, contact your Toyota Pushing the lever operates the dealer. wiper and washer. Do not try to clear it with a pin or The wiper will automatically operate other object.
Page 221: Refueling
4-4. Refueling Opening the fuel tank 4-4.Refueling WARNING ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure Perform the following steps to do so may result in death or to open the fuel tank cap: serious injury.
Page 222 4-4. Refueling Turn the fuel tank cap slowly WARNING to open it and put it into the ■ When refueling holder on the fuel filler door. Observe the following precautions to prevent fuel overflowing from the fuel tank: ● Securely insert the fuel nozzle into the fuel filler neck.
Page 223 WARNING ■ When replacing the fuel tank Do not use anything but a genu- ine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or seri- ous injury.
Page 224: 4-5. Using The Driving Support Systems
Toyota Safety Sense 4-5.Using the driving support systems WARNING ■ Toyota Safety Sense 2.0 The Toyota Safety Sense 2.0 is designed to operate under the The Toyota Safety Sense 2.0 assumption that the driver will consists of the following drive safely, and is designed to...
Page 225 If the radar sensor, front grille, or front bumper needs to be Observe the following precau- removed and installed, or tions. replaced, contact your Toyota Otherwise, the radar sensor may dealer. not operate properly, possibly leading to an accident resulting in ■...
Page 226 ● Do not attach objects, such as If the windshield needs to be stickers, transparent stickers, replaced, contact your Toyota etc., to the outer side of the dealer. windshield in front of the front camera (shaded area in the ●...
Page 227 4-5. Using the driving support systems ■ Certification For vehicles sold in the U.S.A., Hawaii, American Samoa, Guam, Saipan  and Puerto Rico For vehicles sold in Canada ...
Page 228 4-5. Using the driving support systems...
Page 229 If the message does not disappear, contact your Toyota dealer. camera. If a sunshade Situation Actions was used when To clean the part...
Page 230: Pcs (Pre-Collision System)
If the system If the message does not disappear, determines that the possi- contact your Toyota dealer. bility of a frontal collision • When the temperature around the with an object is extremely radar sensor is outside of the...
Page 231 4-5. Using the driving support systems System functions WARNING ■ Limitations of the pre-colli- Pre-collision warning ■ sion system When the system determines ● The driver is solely responsible for safe driving. Always drive that the possibility of a frontal safely, taking care to observe collision is high, a buzzer will your surroundings.
Page 232 4-5. Using the driving support systems When your vehicle is towing ● WARNING another vehicle ■ Pre-collision braking ● When transporting the vehicle ● When the pre-collision braking via truck, boat, train or similar function is operating, a large means of transportation amount of braking force will be applied.
Page 233 4-5. Using the driving support systems can be changed on the Changing settings of the screen (P.94) of the multi- pre-collision system information display. Enabling/disabling the pre- ■ The warning timing setting is collision system retained when the engine switch is turned to OFF.
Page 234 4-5. Using the driving support systems ● Pre-collision warning Relative speed between Detectable objects Vehicle speed your vehicle and object Approx. 7 to 110 mph Approx. 7 to 110 mph Vehicles (10 to 180 km/h) (10 to 180 km/h) Bicyclists and pedestri- Approx.
Page 235 4-5. Using the driving support systems the pre-collision braking function is in front of your vehicle that may be operating, it will be canceled: mistaken for a detectable object • When the front of your vehicle is ● The accelerator pedal is hit by water, snow, dust, etc.
Page 236 4-5. Using the driving support systems • When approaching an electric toll gate barrier, parking area barrier, or other barrier that opens and closes • When using an automatic car wash • When driving through or under objects that may contact your vehicle, such as thick grass, tree branches, or a banner •...
Page 237 4-5. Using the driving support systems smoke • When the surrounding area is dim, such as at dawn or dusk, or while at night or in a tunnel, making a detectable object appear to be nearly the same color as its sur- roundings •...
Page 238: Lta (Lane Tracing Assist)
4-5. Using the driving support systems pressure, etc.) LTA (Lane Tracing • When the vehicle is being driven Assist) on a gravel road or other slippery surface ■ If VSC is disabled When driving on highways If VSC is disabled (P.363), the ●...
Page 239 Failure to do so may lead to an bars, kangaroo bar, etc.). accident, resulting in death or serious injury. ● If your windshield needs repairs, contact your Toyota ● Vehicle is driven on a road sur- dealer. face which is slippery due to rainy weather, fallen snow, ■...
Page 240 4-5. Using the driving support systems Objects or patterns that could ● WARNING be mistaken for white (yellow) ● When the follow-up cruising dis- lines are present on the side of play is displayed (P.244) and the road (guardrails, curbs, the preceding vehicle changes reflective poles, etc.).
Page 241 4-5. Using the driving support systems The vehicle is driven on an ● WARNING unpaved or rough road. ● The vehicle is driven in an area without white (yellow) lines, ● The traffic lane is excessively such as in front of a tollgate or narrow or wide.
Page 242 4-5. Using the driving support systems from its lane or course , a warn- from its lane or course , the sys- ing is displayed on the multi- tem provides assistance as nec- information display, and a warn- essary by operating the steering ing buzzer will sound to alert the wheel in small amounts for a driver.
Page 243 4-5. Using the driving support systems Vehicle sway warning func- Lane centering function ■ ■ tion This function is linked with When the vehicle is swaying dynamic radar cruise control within a lane, the warning with full-speed range and pro- buzzer will sound and a mes- vides the required assistance by sage will be displayed on the...
Page 244 4-5. Using the driving support systems the multi-information display and the function is temporarily can- celed. Indications on multi-infor- mation display Turning LTA system on LTA indicator Press the LTA switch to turn the The illumination condition of the indicator informs the driver of the LTA system on.
Page 245 4-5. Using the driving support systems Inside of displayed lines is or lane centering function is operat-  ing. white Both outer sides of the lane are dis- played: Indicates that steering wheel assist of the lane centering function is operating. One outer side of the lane is dis- played: Indicates that steering wheel assist of the steering assist...
Page 246 4-5. Using the driving support systems • LTA is turned on. This function operates when all of • Vehicle speed is approximately 32 the following conditions are met. mph (50 km/h) or more. • Setting for “Sway Warning” in the •...
Page 247 4-5. Using the driving support systems ■ Temporary cancelation of func- ■ Hands off steering wheel warn- tions ● When operation conditions are no In the following situations, a warning longer met, a function may be message urging the driver to hold temporarily canceled.
Page 248 ● “LTA Malfunction Visit Your Dealer” The system may not be operating properly. Have the vehicle inspected by your Toyota dealer. “LTA Unavailable” ● The system is temporarily canceled...
Page 249: Rsa (Road Sign Assist)
4-5. Using the driving support systems nizes a sign, the sign will be dis- RSA (Road Sign played on the multi-information Assist) display. : If equipped  When the driving support sys- tem information display is The RSA system recognizes selected, a maximum of 3 specific road signs using signs can be displayed.
Page 250: Warning Display
4-5. Using the driving support systems speed unit) may be detected Supported types of road incorrectly and a warning dis- signs play may not operate properly. The following types of road ■ Setting procedure signs are recognized. P.94 A non-official or a recently intro- ■...
Page 251: Dynamic Radar Cruise Control With Full-Speed Range
ON. If “RSA Malfunction Visit Your ■ Dealer” is shown The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer. ■ Customization Some functions can be customized. (P.94) Multi-information display Set speed...
Page 252: Dynamic Radar Cruise Control With Full-Speed Range
4-5. Using the driving support systems Indicators WARNING Operation switches ■ ● The dynamic radar cruise con- trol with full-speed range pro- vides driving assistance to reduce the driver’s burden. However, there are limitations to the assistance provided. Read the following conditions carefully.
Page 253 4-5. Using the driving support systems Cautions regarding the driv- ■ WARNING ing assist systems ● Assisting the driver to operate Observe the following precau- the vehicle tions, as there are limitations to The dynamic radar cruise control the assistance provided by the system.
Page 254 4-5. Using the driving support systems When weather conditions are ● bad enough that they may pre- vent the sensors from detecting correctly (fog, snow, sand- storm, heavy rain, etc.) ● When there is rain, snow, etc. on the front surface of the radar or front camera ●...
Page 255 4-5. Using the driving support systems When there are no vehicles ahead The vehicle travels at the speed set by the driver. Example of deceleration cruising and follow-up cruising When a preceding vehicle driving slower than the set speed appears When a vehicle is detected running ahead of you, the system automatically decelerates your vehicle.
Page 256 4-5. Using the driving support systems mately 20 mph [30 km/h]) and release when the desired speed is reached. and press the “-SET” switch to set the speed. In the vehicle-to-vehicle dis- tance control mode, the set Cruise control “SET” indicator will come on.
Page 257 4-5. Using the driving support systems dance with vehicle speed. When Changing the vehicle-to- the vehicle is stopped by system vehicle distance (vehicle- control, the vehicle stops at a to-vehicle distance con- certain vehicle-to-vehicle dis- trol mode) tance depending on the situa- tion.
Page 258: Control Mode
4-5. Using the driving support systems Canceling and resuming the speed control Warnings may not occur ■ when In the following instances, warn- Pressing the cancel switch ings may not occur even when cancels the speed control. the vehicle-to-vehicle distance is The speed control is also canceled small.
Page 259 4-5. Using the driving support systems With the cruise control off, setting: P.258 press and hold the cruise control main switch for 1.5 seconds or more. Immediately after the switch is pressed, the dynamic radar cruise control indicator will come on. After- wards, it switches to the cruise con- trol indicator.
Page 260 Contact your Toyota dealer. As the sensor may not be able to ■ Automatic cancelation of con- correctly detect these types of vehi-...
Page 261 4-5. Using the driving support systems ● Motorcycles traveling in the same ● When steering wheel operation or lane your position in the lane is unsta- ● When water or snow thrown up by the surrounding vehicles hinders the detecting of the sensor ●...
Page 262: Bsm (Blind Spot Monitor)
4-5. Using the driving support systems BSM (Blind Spot Moni- WARNING tor) ■ Cautions regarding the use of the RCTA function : If equipped The driver is solely responsible for safe driving. Always drive safely, The Blind Spot Monitor is a taking care to observe your sur- system that has 2 functions: roundings.
Page 263 There may be a sensor malfunction from behind the rear seat. or misaligned. Have the vehicle inspected at a Toyota dealer. ■ Customization Some functions can be customized. (P.94)
Page 264 4-5. Using the driving support systems ■ Certification for the Blind Spot Monitor For vehicles sold in the U.S.A., Hawaii, American Samoa, Guam, Saipan  and Puerto Rico For vehicles sold in Canada ...
Page 265 If a sensor or the rear bumper needs to be removed/installed ● Keep the sensors and the sur- or replaced, contact your Toyota rounding areas on the rear dealer. bumper clean at all times. If a sensor or its surrounding ●...
Page 266 4-5. Using the driving support systems The Blind Spot Monitor function Vehicles that can be detected by the Blind Spot Monitor ■ The BSM function uses radar sensors to detect the following vehi- cles traveling in adjacent lanes and advises the driver of the pres- ence of such vehicles via the indicators on the outside rear view mirrors.
Page 267 4-5. Using the driving support systems Approximately 9.8 ft. (3 m) to 197 ft. (60 m) from the rear bumper The greater the difference in speed between your vehicle and the detected vehicle is, the farther away the vehicle will be detected, causing the outside rear view mirror indicator to illuminate or flash.
Page 268 (if • When the vehicle throws up water equipped) or multimedia sys- or snow behind. tem (if equipped) screen.  When the Toyota parking assist monitor (if equipped) is displayed...
Page 269 4-5. Using the driving support systems Approxi- Approach- Speed mate ing vehicle alert dis- tance 18 mph 65 ft. (20 Fast (28 km/h) 5 mph (8 18 ft. (5.5 Slow km/h)  When the panoramic view monitor (if equipped) is dis- played ■...
Page 270 4-5. Using the driving support systems ● Guardrails, walls, signs, parked vehicles and similar stationary objects ● Small motorcycles, bicycles, pedestrians, etc. ● Vehicles moving away from your vehicle • When backing out of a shallow angle parking spot ● Vehicles approaching from the parking spaces next to your vehi- : Depending on conditions, detec-...
Page 271: Intuitive Parking Assist
4-5. Using the driving support systems Intuitive parking assist : If equipped The distance from your vehicle to objects, such as a wall, when parallel parking • When the distance between your or maneuvering into a vehicle and metal objects, such as a guardrail, wall, sigh, or parked garage is measured by the vehicle, which may reflect electri-...
Page 272: Intuitive Parking Assist
(if equipped) or multimedia system (if equipped) screen depending on the positionand distance to the object.  When the Toyota parking assist monitor (if equipped) is displayed...
Page 273 4-5. Using the driving support systems Except panoramic view  WARNING ■ Intuitive parking assist pre- cautions Observe the following precau- tions. Failing to do so may result in the vehicle being unable to be driven safely and possibly cause an acci- dent.
Page 274 Once the ice melts, the sys- tem will return to normal. If a warning message is displayed even if the sensor is clean, there may be a sensor malfunction. Have the vehicle inspected by your Toyota...
Page 275 4-5. Using the driving support systems dealer. a sensor is extremely hot or cold. ● On an extremely bumpy road, on ■ Sensor detection information an incline, on gravel, or on grass. ● The sensor’s detection areas are ● The vicinity of the vehicle is noisy limited to the areas around the due to vehicle horns, motorcycle vehicle’...
Page 276 4-5. Using the driving support systems Approximately 3.3 ft. (100 Sensor detection display, object distance Approximately 4.9 ft. (150 Detection range of the sen- ■ sors Approximately 2.1 ft. (63 cm) The diagram shows the detection range of the sensors. Note that the sensors cannot detect objects that are extremely close to the vehicle.
Page 277 4-5. Using the driving support systems Multi-information display Navigation or multimedia system screen  Approximate distance to object: 1.6 ft. (48 cm) to 1.1 ft. (34 cm) Multi-information display Navigation or multimedia system screen  Approximate distance to object: 1.1 ft. (34 cm) to 0.5 ft. (15 cm) Navigation or multimedia system screen Multi-information display : The distance segments will blink slowly.
Page 278: Pksb (Parking Support Brake)
4-5. Using the driving support systems PKSB (Parking Sup- ■ Muting the buzzer sound port Brake) ● Automatic buzzer mute function Even when the sensors are operat- : If equipped ing, the buzzer will be muted in the The Parking Support Brake following situations: •...
Page 279: Pksb (Parking Support Brake)
4-5. Using the driving support systems WARNING NOTICE ■ Limitations of the Parking ■ If “Parking Support Brake Support Brake system Unavailable” is displayed on the multi-information display Do not overly rely on the system, and the PKSB OFF indicator as doing so may lead to an acci- is flashing dent.
Page 280: Brake
4-5. Using the driving support systems The system has determined that Display and buzzer for stronger-than-normal brake opera- engine output restriction tion is necessary. control and brake control Navigation system (if equipped) or multimedia system (if equipped) If the engine output restriction screen: “BRAKE!”...
Page 281 4-5. Using the driving support systems restrain any increase in the vehicle speed. (Engine output restriction control: See figure 2.) Additionally, if the accelerator pedal continues to be depressed, the brakes will be applied automatically to reduce the vehicle speed. (Brake control: See figure 3.) ...
Page 282 Re-enabling the Parking Sup- displayed even after initialization, port Brake have the vehicle inspected by To re-enable the Parking Support your Toyota dealer. Brake when it is disabled due to operation of the Parking Support ■ If a battery terminal has been...
Page 283: Parking Support Brake Function (Static Objects)
4-5. Using the driving support systems Parking Support Brake function (static objects) : If equipped If the sensors detect a static object, such as a wall, in the trav- eling direction of the vehicle and the system determines that a collision may occur due to the vehicle suddenly moving for- ward due to an accidental accelerator pedal operation, the vehicle moving the unintended direction due to the wrong...
Page 284 4-5. Using the driving support systems When the accelerator pedal is depressed excessively ■ When the vehicle moves in the unintended direction due to ■ the wrong shift position being selected Types of sensors WARNING To ensure the Parking Sup- ■...
Page 285 ● When using steam to clean the function. Have the vehicle vehicle, do not direct steam too inspected by your Toyota close to the sensors as doing so dealer. may cause a sensor to malfunc- tion.
Page 286 4-5. Using the driving support systems brake control. ■ The Parking Support Brake • The static object is no longer 6 to function (static object) will 13 ft. (2 to 4 m) away from the operate when vehicle or in the traveling direction of the vehicle.
Page 287 4-5. Using the driving support systems control and engine output restric- drainage ditches tion control are performed, the intui- • When driving up or down a steep tive parking assist buzzer will sound slope to notify the driver of the approxi- •...
Page 288 4-5. Using the driving support systems been changed due to a collision or an incline, on gravel, or on grass. other impact • The objects draw too close to the sensor. ■ Situations in which the Parking ● Other sonic waves sources Support Brake function (static •...
Page 289: Parking Support Brake Function (Rear-Crossing * Vehicles)
4-5. Using the driving support systems Parking Support Brake function (rear-crossing vehicles) : If equipped If a rear radar sensor detects a vehicle approaching from the right or left at the rear of the vehicle and the system deter- mines that the possibility of a collision is high, this function will perform brake control to reduce the likelihood of an impact with the approaching vehicle.
Page 290: Parking Support Brake Func- Tion (Rear-Crossing Vehicles)
• A vehicle is no longer approaching operate properly due to a sen- from the right or left at the rear of sor malfunction. Have the vehi- the vehicle. cle inspected by your Toyota dealer. ● Brake control • The Parking Support Brake is dis- ●...
Page 291 4-5. Using the driving support systems types of vehicles and/or objects: ■ Situations in which the system may operate even though there ● Vehicles approaching from directly is no possibility of a collision behind In some situations such as the fol- ●...
Page 292 4-5. Using the driving support systems antenna is installed near a radar sensor ● If the orientation of a radar sensor has been changed ● When multiple vehicles are approaching with only a small gap between each vehicle ● If a vehicle is approaching the rear ●...
Page 293: Rear View Monitor System
4-5. Using the driving support systems Rear view monitor sys- : If equipped The rear view monitor sys- tem assists the driver by displaying an image of the view behind the vehicle with fixed guide lines on the screen while backing up, for example while parking.
Page 294: Rear View Monitor System
4-5. Using the driving support systems In low temperatures, the screen ● WARNING may darken or the image may ● Never depend on the rear view become faint. The image could monitor system entirely when distort when the vehicle is mov- backing up.
Page 295 4-5. Using the driving support systems This line indicates the estimated vehicle center on the ground. Distance guide line Shows distance behind the vehicle. • Displays a point approximately 1.5 ft. (0.5 m) (red) from the edge of the bumper. Distance guide line Shows distance behind the vehicle.
Page 296 Do not expose the camera to strong impact as this could cause a malfunction. If this hap- pens, have the vehicle inspected by your Toyota dealer as soon as possible. Differences between the screen and the actual road  The distance guide lines and...
Page 297 4-5. Using the driving support systems may not actually be parallel with the dividing lines of the parking space, even when they appear to be so. Be sure to check visually.  The distances between the vehicle width guide lines and the left and right dividing lines of the parking space may not be equal, even when they...
Page 298 4-5. Using the driving support systems When approaching three- dimensional objects The distance guide lines are dis- played according to flat surfaced objects (such as the road). It is not possible to determine the position of three-dimensional objects (such as vehicles) using the vehicle width guide lines and distance guide lines.
Page 299 If you notice any symptoms If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer.
Page 300 4-5. Using the driving support systems Symptom Likely cause Solution  The vehicle is in a dark area  The temperature around the lens is Back up while visually either high or low checking the vehicle’s  The outside tempera- surroundings.
Page 301: Toyota Parking Assist Monitor
4-5. Using the driving support systems Toyota parking assist WARNING monitor ● Never depend on the parking assist monitor entirely when backing up. The image and the : If equipped position of the guide lines dis- The parking assist monitor played on the screen may differ from the actual state.
Page 302: Toyota Parking Assist Monitor
4-5. Using the driving support systems Display mode switching but- WARNING ● In low temperatures, the screen may darken or the image may Each time the button is selected, become faint. The image could the rear view mode and the wide distort when the vehicle is mov- rear view mode are switched.
Page 303 4-5. Using the driving support systems Display mode switching but- Canceling Toyota parking assist monitor Each time the button is selected, The parking assist monitor is the rear view mode and the wide canceled when the shift lever is rear view mode are switched.
Page 304 4-5. Using the driving support systems those who are comfortable with Estimated course line dis- parking the vehicle without the play mode aid of the estimated course lines. Screen description Rear view  Distance guide line display  mode (P.306) Distance guide lines only are Vehicle width guide line displayed.
Page 305: Display Mode
If the steering wheel is straight and the vehicle width guide lines and the estimated course lines are not in alignment, have the vehicle inspected by your Toyota dealer. Parking assist guide line display mode Vehicle width guide line Displays a guide path when the Screen description vehicle is being backed straight up.
Page 306 4-5. Using the driving support systems Wide rear view  Distance guide line dis- play mode Screen description Rear view  Vehicle width guide line Displays a guide path when the vehicle is being backed straight up. • The displayed width is wider than the actual vehicle width.
Page 307 (0.5 m) (red) from the edge of the bumper will not be displayed. the bumper. Wide rear view  Toyota parking assist monitor precautions Area displayed on screen The parking assist monitor dis- plays an image of the view from the bumper of the rear area of the vehicle.
Page 308 Do not expose the camera to strong impact as this could cause a malfunction. If this hap- pens, have the vehicle inspected by your Toyota dealer as soon as possible. Differences between the screen and the actual road  The distance guide lines and...
Page 309 4-5. Using the driving support systems may not actually be parallel with the dividing lines of the parking space, even when they appear to be so. Be sure to check visually.  The distances between the vehicle width guide lines and the left and right dividing lines of the parking space may not be equal, even when they...
Page 310 4-5. Using the driving support systems When approaching three- dimensional objects The estimated course lines tar- get flat surfaced objects (such as the road). It is not possible to determine the position of three- dimensional objects (such as vehicles) using the estimated course lines and distance guide lines.
Page 311 If you notice any symptoms If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer.
Page 312 4-5. Using the driving support systems Symptom Likely cause Solution  The vehicle is in a dark area  The temperature around the lens is Back up while visually either high or low checking the vehicle’s  The outside tempera- surroundings.
Page 313 If this does not resolve Guide lines are not dis- The back door is open. the symptom, have the played vehicle inspected by your Toyota dealer.  Battery has been rein- stalled.  The steering wheel Stop the vehicle, and has been moved while...
Page 314: Panoramic View Monitor
4-5. Using the driving support systems may hit another vehicle or possi- Panoramic view moni- bly cause an accident. Pay attention to the following : If equipped precautions when using the panoramic view monitor. Panoramic view monitor assists the driver in viewing WARNING the surroundings, when ●...
Page 315: Panoramic View Monitor
4-5. Using the driving support systems WARNING NOTICE ● Do not use the panoramic view ● In panoramic view/moving monitor system in the following view/see-through view, the sys- cases: tem combines images taken from the front, back, left and • On icy or slick road surfaces, or right side cameras into a single in snow image.
Page 316 4-5. Using the driving support systems NOTICE ● People and other three-dimen- sional obstacles may appear differently when displayed on the panoramic view monitor. (These differences include, among others, cases in which displayed objects appear to have fallen over, disappear near image processing areas, appear from image processing areas, or when the actual distance to...
Page 317: How To Switch The Display
4-5. Using the driving support systems Checking the front and When folding the outside around the vehicle rear view mirrors Wide front view & panoramic Wide front view & side views   view Side views  Checking the rear and around the vehicle Rear view &...
Page 318 4-5. Using the driving support systems When the shift lever is in the “P” position Map screen, audio screen, etc. Moving view See-through view When the shift lever is in the “D” or “N” position Map screen, audio screen, etc. Wide front view &...
Page 319 4-5. Using the driving support systems When the shift lever is in the “R” position Rear view & panoramic view Wide rear view Rear view enabled. Checking around the vehicle Screen display The moving view screen and the Moving view ...
Page 320 4-5. Using the driving support systems screen. Select to change the display mode To resume rotation, select between the moving view and the Body color setting switch see-through view. Select to display the body color set- Rotation pause switch ting screen and change the color of Select to pause the rotation of the the vehicle displayed on the pan- screen.
Page 321 4-5. Using the driving support systems Screen display Wide front view & panoramic view  Distance guide lines Shows distance in front of the vehicle. • Display points approximately 3 ft. (1 m) from the edge of the bumper. Intuitive parking assist When a sensor detects an obstacle, the direction of and the approximate distance to the obstacle are displayed and the buzzer sounds.
Page 322 4-5. Using the driving support systems WARNING ● When a sensor indicator on the intuitive parking assist display illumi- nates in red or a buzzer sounds continuously, be sure to check the area around the vehicle immediately and do not proceed any further until safety has been ensured, otherwise an unexpected accident may occur.
Page 323 4-5. Using the driving support systems driver in safe driving in situations such as when driving on a narrow road, by allowing them to check the areas around the sides of the vehicle. To display the screen, press the camera switch when the shift lever is in the “D”, or “N”...
Page 324 4-5. Using the driving support systems ● The side views can be displayed even when the outside rear view mirrors are retracted. WARNING ● When a sensor indicator on the intuitive parking assist display illumi- nates in red or a buzzer sounds continuously, be sure to check the area around the vehicle immediately and do not proceed any further until safety has been ensured, otherwise an unexpected accident may occur.
Page 325 4-5. Using the driving support systems target object.  Ensure that the vehicle width guide line is parallel to the tar- get object.  Pull over to the curb as shown in the illustration above, tak- ing care not to let the vehicle width guide line overlap the Checking the rear and around the vehicle The rear view &...
Page 326 4-5. Using the driving support systems Rear view & panoramic view  Intuitive parking assist When a sensor detects an obstacle, the direction of and the approximate distance to the obstacle are displayed and the buzzer sounds. Rear Cross Traffic Alert When a sensor detects an obstacle, the direction of obstacle is displayed and the buzzer sounds.
Page 327 4-5. Using the driving support systems Rear Cross Traffic Alert When a sensor detects an obstacle, the direction of obstacle is displayed and the buzzer sounds. Guide line switching button Select to switch the guide line mode. (P.328) Display mode switching button Each time the display mode switching button is selected, the mode will change between the rear view &...
Page 328 4-5. Using the driving support systems ● The monitor is cancelled when the shift lever is shifted into any position other than the “R” position. ● For details about the intuitive parking assist (P.271), Rear Cross Traffic Alert function (P.268) and Parking Support Brake function. (P.278) ●...
Page 329 4-5. Using the driving support systems • The guide lines move in conjunction with the estimated course lines. • The guide lines display points approximately 1.5 ft. (0.5 m) (red) and approximately 3 ft. (1 m) (yellow) from the center of the edge of the bumper.
Page 330 If the steering wheel is straight and the vehicle width guide lines and the estimated course lines are not in alignment, have the vehicle inspected by your Toyota dealer. ● Do not use the system if the display is incorrect due to an uneven (hilly)
Page 331 4-5. Using the driving support systems width guide lines are within Parking the left and right dividing lines of the parking space. Using the estimated course line When parking in a space which is in the reverse direction to the space described in the proce- dure below, the steering direc- tions will be reversed.
Page 332: Rear View Mirrors
4-5. Using the driving support systems Shift the shift lever to the “R” When folding the outside position. rear view mirrors Back up until the parking Even when outside rear view assist guide line meets the mirrors are stored, the monitor edge of the dividing line of can display various images of the parking space.
Page 333 4-5. Using the driving support systems touch the panoramic view dis- WARNING play again. ● When a sensor indicator on the intuitive parking assist display ● The magnifying function is illuminates in red or a buzzer enabled when all of the following sounds continuously, be sure to conditions are met: check the area around the vehi-...
Page 334 4-5. Using the driving support systems Select the desired color. Displays the next page Panoramic view monitor precautions Area displayed on screen Area of image of panoramic view The panoramic view monitor displays an image of the surrounding view of the vehicle. Since the panoramic view processes and displays images based on flat road surfaces, it cannot depict the position of three-dimension objects (such as vehicle bumpers, etc.) that are in positions higher...
Page 335 4-5. Using the driving support systems Parts of objects which extend above a certain height cannot be displayed on the screen. ● As the images obtained from four cameras are processed and displayed on the standard of a flat road surface; the panoramic view/moving view/see through view may be displayed as follows.
Page 336 4-5. Using the driving support systems WARNING ● When a sensor indicator on the intuitive parking assist display illumi- nates in red or a buzzer sounds continuously, be sure to check the area around the vehicle immediately and do not proceed any further until safety has been ensured, otherwise an unexpected accident may occur.
Page 337 4-5. Using the driving support systems displayed. ● Black masking is done for dis- tance detection differences to the front of the vehicle. ● The area covered by the camera is limited. Objects which are close to either corner of the bumper or under the bumper cannot be seen on the screen.
Page 338 Do not expose the camera to strong impacts as this could cause a malfunction. If this hap- pens, have the vehicle inspected by your Toyota dealer as soon as possible. Difference between the screen and the actual road  The distance guide lines and...
Page 339 4-5. Using the driving support systems may not actually be parallel with the dividing lines of the parking space, even when they appear to be so. Be sure to check visually.  The distances between the vehicle width guide lines and the left and right dividing lines of the parking space may not be equal, even when they...
Page 340 4-5. Using the driving support systems When any part of the vehicle sags When any part of the vehicle sags due to the number of pas- sengers or the distribution of the load, there is a margin of error between the guide lines on the screen and the actual dis- tance/course on the road.
Page 341 4-5. Using the driving support systems WARNING ● When a sensor indicator on the intuitive parking assist display illumi- nates in red or a buzzer sounds continuously, be sure to check the area around the vehicle immediately and do not proceed any further until safety has been ensured, otherwise an unexpected accident may occur.
Page 342 4-5. Using the driving support systems Visually check the surroundings Estimated course line and the area behind the vehicle. Three-dimensional objects In the case shown below, the (such as the overhang of a wall truck appears to be outside of or loading platform of a truck) in the estimated course lines and high positions may not be pro-...
Page 343 If you notice any symptoms If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer.
Page 344 4-5. Using the driving support systems Symptom Likely cause Solution  The vehicle is in a dark area  The temperature around the lens is Back up while visually either high or low checking the vehicle’s  The outside tempera- surroundings.
Page 345 If this does not resolve Guide lines are not dis- The back door is open. the symptom, have the played vehicle inspected by your Toyota dealer.  Battery has been rein- stalled.  The steering wheel has been moved while the battery was being Have the vehicle reinstalled.
Page 346: Stop & Start System
4-5. Using the driving support systems When the brake hold sys- ■ Stop & Start system tem is operating : If equipped  When the engine is stopped by the Stop & Start system, if The Stop & Start system the brake pedal is released stops and starts the engine the engine will remain...
Page 347: Stop & Start System
● Installation and removal of electri- started. cal components and wireless devices may affect the Stop & Start system. Contact your Toyota Hill-start assist control dealer for details. ● When stopping the vehicle for a When the engine is stopped by longer period of time, turn the the Stop &...
Page 348 4-5. Using the driving support systems ing wheel may temporarily feel • When the elapsed time since the heavy. engine was restarted is short. • When the vehicle is stopped fre- ■ Operating conditions quently, such as when in a traffic ●...
Page 349 4-5. Using the driving support systems the Stop & Start system, the (P.505, 505) engine may restart automatically If the windshield fogs up frequently, in the following situations: (To press the Stop & Start cancel switch enable the engine to be stopped to disable the Stop &...
Page 350 (more than 60 minutes) booster vacuum reaches a predeter-  The battery may be deteriorated. mined level. Contact your Toyota dealer for details. “For Climate Control” “Stop & Start System • The air conditioning system has been turned on or is being used.
Page 351 • The battery charge may be low. The engine is restarted to priori- The system may be malfunctioning. Have the vehicle inspected by your tize battery charging. After the Toyota dealer. engine runs for a certain amount of time, the system will be enabled. WARNING ■...
Page 352: Driving Mode Select Switch
4-5. Using the driving support systems Driving mode select NOTICE switch ● Even though the driver’s seat belt is not fastened, the driver’s and front passenger’s seat belt The driving modes can be reminder light does not illumi- selected to suit the driving nate.
Page 353: Driving Mode Select Switch
4-5. Using the driving support systems Eco drive mode indicator illumi- economy by more smoothly gener- nates on the multi-information dis- ating torque in response to acceler- play. ator pedal operations compared to normal mode and restraining air Normal mode conditioning system operations Suitable for normal driving.
Page 354: Multi-Terrain Select (Awd Vehicles)
4-5. Using the driving support systems ■ Air conditioning system opera- Multi-terrain Select tion in Eco drive mode (AWD vehicles) In Eco drive mode, heating/cooling operations and the fan speed is con- trolled to improve fuel efficiency. Multi-terrain Select is a sys- Perform the following procedures to tem that improves drivabil- increase the air conditioning perfor-...
Page 355: Multi-Terrain Select (Awd Vehicles)
4-5. Using the driving support systems Changing the mode WARNING ● The road conditions listed in Dynamic Torque Control ■ “Guidelines for selecting each AWD vehicles mode” are for reference only. There is a chance that the func- tion may not be the most appro- priate in terms of road conditions such as pitch, slip- periness, undulation, etc.
Page 356 4-5. Using the driving support systems Rock & Dirt mode not in Rock & Dirt mode, the sys- tem switches to Rock & Dirt mode When the switch is turned to the and the Rock & Dirt mode indicator right while not in Rock & Dirt mode, illuminates on the multi-information the system switches to Rock &...
Page 357 If Mud & Sand or Rock & Dirt mode tem may be malfunctioning. Have is continuously used for a long the vehicle inspected by your Toyota period of time, the brakes may over- dealer immediately. heat, and Multi-terrain Select brake ●...
Page 358: Snow Mode Switch
4-5. Using the driving support systems When the switch is pressed again, Snow mode switch the snow mode indicator turns off. : If equipped Snow mode can be selected to suit the conditions when driving on slippery road sur- faces, such as on snow. System operation Dynamic Torque Control AWD ...
Page 359: Snow Mode Switch
4-5. Using the driving support systems Downhill assist con- trol system : If equipped The downhill assist control system helps to prevent excessive speed on steep downhill slopes. The system will operate Turning off the system when the vehicle is traveling under 25 km/h (15 mph) with Press the “DAC”...
Page 360: Downhill Assist Control Sys- Tem
• A motor sound may be heard after the vehicle comes to a stop. ■ System malfunction In the following cases, have your vehicle checked by your Toyota dealer. ● The downhill assist control system indicator does not come on when the engine switch is turned to ON.
Page 361: Driving Assist Systems
4-5. Using the driving support systems Enhanced VSC (Enhanced ■ Driving assist systems Vehicle Stability Control) Provides cooperative control of To keep driving safety and the ABS, TRAC, VSC and EPS. performance, the following systems operate automati- Helps to maintain directional cally in response to various stability when swerving on slip- driving situations.
Page 362: Driving Assist Systems
4-5. Using the driving support systems Hill-start assist control between the front and rear ■ wheels and between the rear left Helps to reduce the backward and right wheels is precisely movement of the vehicle when controlled to improve drivability starting on an uphill and stability.
Page 363 TRAC is temporary deactivated. If • The brake pedal may pulsate the information continues to show, slightly after the ABS is activated. contact your Toyota dealer. • The brake pedal may move down slightly after the ABS is activated. ■...
Page 364 4-5. Using the driving support systems ■ Active Cornering Assist opera- approximately 6 mph (10 km/h) tion sounds and vibrations ● A certain amount of time elapses When Active Cornering Assist is during operation operated, operation sounds and ● The accelerator pedal is vibrations may be generated from depressed a large amount the brake system, but this is not a...
Page 365 “AWD System Malfunc- A malfunction occurred in the AWD system. tion 2WD Mode  Have your vehicle checked by your Toyota Engaged Visit Your dealer immediately. Dealer” : Dynamic Torque Control AWD vehicles only. After stopping the vehicle, do...
Page 366 4-5. Using the driving support systems When Active Cornering Assist ● WARNING frequently operates, Active Cor- ■ The ABS does not operate nering Assist may temporarily effectively when stop operating to ensure proper operation of the brakes, TRAC, ● The limits of tire gripping perfor- VSC.
Page 367 If you make no extreme correction function correctly if different tires with the steering or brakes, your are installed on the vehicle. Contact your Toyota dealer for fur- vehicle and trailer should stabi- ther information when replacing lize. (P.181) tires or wheels.
Page 368: 4-6. Driving Tips
4-6. Driving tips Winter driving tips 4-6.Driving tips WARNING ■ Driving with snow tires Carry out the necessary Observe the following precautions to reduce the risk of accidents. preparations and inspec- Failure to do so may result in a tions before driving the loss of vehicle control and cause vehicle in winter.
Page 369: Winter Driving Tips
Request repairs or replacement of snow tires from your Toyota drive at a reduced speed suit- dealer or legitimate tire retailers. able to road conditions. This is because the removal and...
Page 370 P, Vehicles with 235/55R19  there may be a problem with the 101V tires shift lock system. Have the vehi- cle inspected by your Toyota Tire chains cannot be mounted. dealer immediately. Snow tires should be used WARNING instead.
Page 371: Utility Vehicle Precautions
4-6. Driving tips Utility vehicle precau- WARNING tions ■ Utility vehicle precautions Always observe the following pre- cautions to minimize the risk of This vehicle belongs to the death, serious injury or damage to utility vehicle class, which your vehicle: has higher ground clear- ●...
Page 372: Utility Vehicle Precautions
4-6. Driving tips road, please observe the follow- • State and Local Parks and Recre- ation Departments ing precautions to ensure your • State Motor Vehicle Bureau driving enjoyment and to help • Recreational Vehicle Clubs • U.S. Forest Service and Bureau of prevent the closure of areas to Land Management off-road vehicles:...
Page 373 4-6. Driving tips Inspection after off-road driv- ■ WARNING ● When driving off-road or in rug- ● Sand and mud that has accu- ged terrain, do not drive at mulated around brake discs excessive speeds, jump, make may affect braking efficiency sharp turns, strike objects, etc.
Page 374 4-6. Driving tips...
Page 375: Entune Audio
Entune audio 5-1. Basic function 5-5. Using the audio/visual system Buttons overview..Quick reference ... Menu screen ....Some basics....Status icon ....5-6. Radio operation “Setup” screen .... AM/FM radio....5-2. Basic information before operation Internet radio ....Initial screen ....5-7.
Page 376: Free System For Cellular Phones)
5-18.Entune settings 5-13.Phone operation (Hands- free system for cellular Toyota Entune App Suite phones) Connect settings..Quick reference... Some basics ....Placing a call using the Blue- ® tooth hands-free system ........Receiving a call using the ® Bluetooth hands-free sys- tem ......
Page 377: Basic Function Buttons Overview
When an Apple CarPlay connection is established, press to dis- *1, 2 play the Phone app screen. Press to display the Toyota Entune App Suite Connect screen. (P.496) Turn to change the radio station or skip to the next or previous track/file.
Page 378 5-1. Basic function 418) When an Apple CarPlay connection is established, press to dis- *1, 2 play the Maps app screen. Press to display the audio/visual system screen. (417, 418) Press to display the “Menu” screen. (P.379) Press to display the home screen. (P.386) : For details about Apple CarPlay: P.408 : This function is not made available in some countries or areas.
Page 379: Menu Screen
5-1. Basic function Menu screen Menu screen operation Press the “MENU” button to display the “Menu” screen. Displays the clock. Select to display the clock settings screen. (P.412) Select to display the audio control screen. (P.417) Select to display the hands-free operation screen. (P.458) When an Apple CarPlay connection is established, select to dis- play the Phone app screen.
Page 380: Status Icon
5-1. Basic function : This function is not made avail- Status icon able in some countries or areas. Status icons are displayed ● The number of status icons that can be displayed differs depend- at the top of the screen. ing on the displayed screen.
Page 381 5-1. Basic function While using Data Communi-  ® Bluetooth connection cation Module (DCM) condition display Reception Level Indicators ® An antenna for the Bluetooth Poor connection is built into the instrument panel. Excellent ® The condition of the Bluetooth ®...
Page 382: Setup" Screen
*1, 2 tion settings. (P.404) Press the “MENU” button, then select “Setup” to display the Select to set Toyota Entune “Setup” screen. The items App Suite Connect settings. shown on the “Setup” screen (P.500) can be set. : Vehicles equipped with DCM : This function is not made avail- able in some countries or areas.
Page 383: Basic Information Before Operation
5-2. Basic information before operation Initial screen 5-2.Basic information before operation When the engine switch is turned to ACC or ON, the initial screen will be dis- played and the system will begin operating. Caution screen After a few seconds, the caution screen will be displayed.
Page 384: Touch Screen
5-2. Basic information before operation Touch screen Touch screen gestures Operations are performed by touching the touch screen directly with your finger. Operation method Outline Main use  Touch  Selecting an item Quickly touch and on the screen release once. ...
Page 385: Touch Screen Operation
5-2. Basic information before operation Touch screen operation NOTICE ● To prevent damaging the This system is operated screen, lightly touch the screen buttons with your finger. mainly by the buttons on ● Do not use objects other than the screen. (Referred to as your finger to touch the screen.
Page 386: Home Screen
5-2. Basic information before operation ate properly: Home screen • Magnetic isolation cards • Metallic foil, such as the inner On the home screen, multi- packaging of a cigarette box ple screens, such as the audio/visual system screen, • Metallic wallets or bags hands-free screen and clock •...
Page 387: Entering Letters And Numbers/List Screen Operation
5-2. Basic information before operation Entering letters and Customizing the home numbers/list screen screen operation The display information/area on the home screen and the home Entering letters and num- screen layout can be changed. bers Press the “MENU” button. Select “Setup”. When searching by a name or entering data, letters and num- ...
Page 388: List Screen
5-2. Basic information before operation Input text. Select to change character types. (P.388) Select the desired candidate. Select to make a space on cursor. ● Keyboard layout can be changed. (P.411) Changing character type Select “Change Type”.  To select a candidate that is not displayed, select , and then select the desired predic-...
Page 389 5-2. Basic information before operation Input text. To scroll up/down the list, flick the list up/down. Select to skip to the next or previous page. Select and hold to scroll through the displayed list. Indicates the position of the displayed entries in the entire Select “Search”.
Page 390: Screen Adjustment
5-2. Basic information before operation ton. Screen adjustment Select to turn day mode on/off. (P.390) The contrast and brightness of the screen display and Select to adjust the screen the image of the camera dis- display. (P.390) play can be adjusted. The Select to adjust the camera screen can also be turned display.
Page 391: Linking Multi-Informa- Tion Display And The System
5-2. Basic information before operation  “Display (General)” screen Linking multi-informa- only: Select “<” or “>” to select tion display and the the desired display. system • “Contrast” “+”: Select to strengthen the con- The following functions of trast of the screen. the system are linked with “-”: Select to weaken the contrast of the multi-information dis-...
Page 392: 5-3. Connectivity Settings
5-3. Connectivity settings Press the “MENU” button. Registering/Connect- 5-3.Connectivity settings ® ing a Bluetooth device To use the hands-free sys- tem, it is necessary to regis- ® ter a Bluetooth phone with the system. Once the phone has been Select “Phone”. registered, it is possible to ...
Page 393: Bluetooth ® Device
5-3. Connectivity settings screen. (P.394) established but registration is not yet complete). ® Register the Bluetooth device using your Blue- ® tooth device.  The system is connecting to the registered device. ®  At this stage, the Bluetooth  For details about operating functions are not yet avail- ®...
Page 394 5-3. Connectivity settings Registering from phone devices. Depending on the ■ ® Select “If you cannot find…”. type of Bluetooth device being connected, a message confirming registration may be displayed on the Blue- ® tooth device’s screen. Respond and operate the ®...
Page 395  SPP (Serial Port Profile) Rec- ommended: Ver. 1.2 Follow the steps in “Register- ® • This is a profile to use the “Toyota ing a Bluetooth phone for the first time” from step 5. Entune” function. (P.392) ...
Page 396: Setting Bluetooth Details
® Bluetooth device function may not work properly. ● Refer to http://www.toyota.com/Entune/ in the United States, http://www.toyota.ca/entune in Canada, and http://www.toyotapr.com/entune in Select “Setup”. Puerto Rico, to find approved ®...
Page 397 : Phone on the screen to try again. : Audio player ● It may take time if the device con- : Phone/“Toyota Entune” service nection is carried out during Blue- ® tooth audio playback.  The profile icon for a currently...
Page 398 5-3. Connectivity settings ● Depending on the type of Blue- ® Bluetooth phone available, ® tooth device being connected, it the system will automatically may be necessary to perform ® additional steps on the device. connect to the Bluetooth phone with the highest prior- ®...
Page 399 5-3. Connectivity settings This operation cannot be per- Select the desired device. formed while driving. ® Display the Bluetooth set- tings screen. (P.396) Select “Add New Device”. ® When another Bluetooth  device is connected ®  To disconnect the Bluetooth Select “Yes”...
Page 400 5-3. Connectivity settings Select “Device Info”. ® the Bluetooth phone and cannot be changed. Compatibility profile is unique ® to the Bluetooth device and cannot be changed. Select to reset all setup items. Confirm and change the ® ● If 2 Bluetooth devices have been ®...
Page 401 5-3. Connectivity settings Select the desired connec- Select the desired item to be tion method. set. “Vehicle”: Select to connect the ® Select to set Bluetooth con- audio player from the vehicle’s nection on/off. (P.401) audio/visual system. “Device”: Select to connect the Select to change the auto- vehicle’s audio/visual system from matic connection priority of...
Page 402 5-3. Connectivity settings ® Select the desired Bluetooth Setting automatic connec- device and select “Move Up” tion priority or “Move Down” to change The automatic connection prior- the preferred order. ® ity of the registered Bluetooth devices can be changed. Select “Preferred Device Set- tings”.
Page 403: Wi-Fi Hotspot
Hotspot service sub- scription from Verizon Wire- Select to set the connection less is required. Contact status display of the phone your Toyota dealer for on/off. details. Select to set the connection  This function is not made status display of the audio available in some countries player on/off.
Page 404 5-3. Connectivity settings Operate the device to con- ® Changing the Wi-Fi set- nect it to the vehicle access tings point.  To check the vehicle access Press the “MENU” button. point password, check “Pass- word”. (P.404) ● Hints for connecting to the vehicle ®...
Page 405 (P.405) application has not been Select to display hints for installed, install the application.) connecting to the vehicle via Contact your Toyota dealer for ® Wi-Fi details about the Toyota Entune Select to make the access App Suite Connect application.
Page 406 5-3. Connectivity settings cracked by a third party: ® Selecting a Wi-Fi connec- • Use an 8-character or longer tion channel password consisting of letters and numbers. (Non-ASCII char- Select “Channel”. acters will not be recognized by Check that the following the system.) screen is displayed.
Page 407 5-3. Connectivity settings tion appears on the right upper ® via the Wi-Fi Hotspot will not be possible. side of the screen. (P.380) ® ● If a Bluetooth device is used while a device is connected using Specifications ® the Wi-Fi Hotspot function, the communication speed may ...
Page 408: Apple Carplay
5-3. Connectivity settings  If “Do Not Enable” is selected, Apple CarPlay an Apple CarPlay connection will not be established. In this Apple CarPlay allows some case, the device can be oper- applications, such as Map, ated as a normal Apple Phone, and Music, to be device, such as an iPod.
Page 409: Troubleshooting
® • Bluetooth phone regulatory standards. Please note • Toyota Entune App Suite Connect that the use of this product with ● Siri guidance volume level can be iPhone or iPod may affect wire- changed on the voice settings less performance.
Page 410 5-3. Connectivity settings Symptom Solution Check if the device supports Apple CarPlay. Check if Apple CarPlay is enabled on the con- nected device. For details, refer to https://www.apple.com/ios/carplay/. Check if “Apple CarPlay” on the general set- tings screen is set to on. (P.411) An Apple CarPlay connec- Check if the Lightning cable being used is certi- tion cannot be estab-...
Page 411: Other Settings
5-4. Other settings the clock, etc. (P.412) General settings 5-4.Other settings  “Language” Select to change the language. The Settings are available for language setting of Apple CarPlay clock, operation sounds, can only be changed on the con- etc. nected iPhone. ...
Page 412: Clock Settings
 “Delete Personal Data” Select to delete personal data. (P.413)  “Software Update” Select to update software versions. For details, contact your Toyota dealer. Select to change the time zone. (P.412)  “Software Update Setting” Select to set software update set- Select to set daylight saving ting.
Page 413 5-4. Other settings Adjust the clock manually. Select “Enable This Feature”. Select “+” to set the time for- Manually select linked set- ward one hour and “-” to set tings the time back one hour. Select “Manually Select Select “+” to set the time for- Linked Settings”.
Page 414: Voice Settings
: This function is not made avail- able in some countries or areas. When the automatic update check function is enabled, if a software update is available from the Toyota Entune center, a message will be displayed. Display the general settings Select “Setup”. screen. (P.411) Select “Voice”.
Page 415: Vehicle Settings
5-4. Other settings tion. Vehicle settings The voice command system adapts the user accent. Settings are available for Select to start the voice rec- vehicle customization, etc. ognition tutorial. Select to set the voice Displaying the vehicle prompt interrupt on/off. settings screen Select to reset all setup Press the “MENU”...
Page 416 (4-digit number) standby screen is displayed. ● If the 4-digit personal code is for- gotten, please contact your Toyota dealer. If the valet mode has been activated Enter the 4-digit personal code and select “OK”.
Page 417: Using The Audio/Visual System
5-5. Using the audio/visual system Quick reference 5-5.Using the audio/visual system Functional overview The audio control screen can be reached by the following methods: From the “AUDIO” button  Press the “AUDIO” button. From the “MENU” button  Press the “MENU” button, then select “Audio”. •...
Page 418: Some Basics
• iPod (Audio Playback) • USB audio/USB video ® • Bluetooth audio • Toyota Entune App Suite Connect : This function is not made avail- able in some countries or areas. “POWER VOLUME” knob: Press to turn the audio/visual Reordering the audio system on and off.
Page 419: Sound Settings
5-5. Using the audio/visual system Select the desired audio Select the desired item to be set. source then to reor- der. Select “OK”. USB/AUX port Connect a device. Select to set the tre- ble/mid/bass. (P.419) Select to set the fader/bal- ance.
Page 420 5-5. Using the audio/visual system according to vehicle speed to Select “+” or “-” to adjust mid- compensate for increased road pitched tones. noise, wind noise, or other Select “+” or “-” to adjust low- noises while driving. pitched tones. Select “Automatic Sound Fader/Balance ■...
Page 421 5-5. Using the audio/visual system and vertically.  The voice command system and its list of commands can Contrast and brightness ■ be operated. (P.450) adjustment The contrast and brightness of the screen can be adjusted. Press the “MENU” button. Select “Setup”.
Page 422: 5-6. Radio Operation
5-6. Radio operation AM/FM radio 5-6.Radio operation Control panel Overview The radio operation screen can be reached by the following methods: P.418 Control screen Press to seek for stations in the relevant program type. Press and hold for continu- ous seek. Turn to step up/down fre- quencies.
Page 423 5-6. Radio operation Select and hold “(Add New)”. muted during refresh operation. ● In some situations, it may take some time to update the station list. Radio options Select “Options”. Select the desired item to be set.  When “(Add New)” is selected, a confirmation mes- sage appears.
Page 424: Internet Radio
5-6. Radio operation nal station Internet radio RBDS features are available only when listening to an FM One of Toyota Entune App station that broadcasts RBDS Suite Connect features is information and the “FM Info” the ability to listen to inter- function is on.
Page 425 5-6. Radio operation http://www.toyotapr.com/entune or call 1-877-855-8377 in Puerto Rico.
Page 426: 5-7. Media Operation
5-7. Media operation (P.427) USB memory 5-7.Media operation Select to change the file/track. Overview Select and hold to fast The USB memory operation rewind. screen can be reached by the Select to play/pause. following methods: P.418 Select to change the ...
Page 427 5-7. Media operation sound. Select to display the play ● If tag information exists, the mode selection screen. file/folder names will be changed to track/album names. Select to display the sound setting screen. (P.419) Repeating Select to change the file. Select and hold to fast The file/track or folder/album rewind.
Page 428: Ipod/Iphone
5-7. Media operation iPod/iPhone NOTICE ● Do not leave your portable player in the car. In particular, Overview high temperatures inside the vehicle may damage the porta- The iPod/iPhone operation ble player. screen can be reached by the ● Do not push down on or apply following methods: P.418 unnecessary pressure to the portable player while it is con-...
Page 429 Bluetooth and USB at the same time, system operation may become unstable. For known phone compatibility information, refer to http://www.toyota.com/Entune/. ● Tracks selected by operating a connected iPod/iPhone may not be recognized or displayed prop- Press to change the track.
Page 430 5-7. Media operation properly if a conversion adapter is Do not push down on or apply ● used to connect a device. unnecessary pressure to the portable player while it is con- nected as this may damage the Repeating portable player or its terminal. The track currently being lis- ●...
Page 431: Bluetooth ® Audio
5-7. Media operation ® able in some countries or areas. Bluetooth audio Control screen ® The Bluetooth audio sys- tem enables users to enjoy listening to music that is played on a portable player on the vehicle speakers via wireless communication. This audio/visual system ®...
Page 432 5-7. Media operation selected. Select to change the album. Select Displays cover art ● Each time is selected, the Control panel mode changes as follows: • random (1 album random)  album random (all album random)  off ® ● Depending on the Bluetooth device that is connected to the system, the music may start play-...
Page 433 5-7. Media operation nected on purpose, such as it was ® ● Before using Bluetooth turned off, this does not happen. devices, users of any electrical Reconnect the portable player medical device other than manually. implantable cardiac pacemak- ® ● Bluetooth device information is ers, cardiac resynchronization...
Page 434: Aux
5-7. Media operation Follow the steps in “Register- ® ing a Bluetooth phone for the first time” from step 5. Overview (P.392) The AUX operation screen can Selecting a registered device  be reached by the following ® Display the Bluetooth audio methods: P.418 control screen.
Page 435 5-7. Media operation NOTICE ● Do not push down on or apply unnecessary pressure to the portable audio device while it is connected as this may damage the portable audio device or its terminal. ● Do not insert foreign objects into the port as this may damage the portable audio device or its ter- minal.
Page 436: 5-8. Audio/Visual Remote Controls
5-8. Audio/visual remote controls Steering switches 5-8.Audio/visual remote controls , iPod/iPhone, Blue-  ® tooth audio , APPS • Press: Change audio modes Steering switch operation • Press and hold (0.8 sec. or Some parts of the audio/visual more): Pause (Press and hold system can be adjusted using again to resume the play the switches on the steering...
Page 437: Audio Settings
5-9. Audio settings Setup 5-9.Audio settings Common settings Display the audio settings Detailed audio settings can screen. be programmed. P.437 Select “Common”. Displaying the audio set- Select the desired items to tings screen be set. Press the “MENU” button. Select to set the cover art display on/off.
Page 438: Audio/Visual System
5-10. Tips for operating the audio/visual system FM is about 25 miles (40 km). Operating information 5-10.Tips for operating the audio/visual system Once outside this range, you may notice fading and drifting, ● The use of a cellular phone inside which increase with the distance or near the vehicle may cause a from the radio transmitter.
Page 439 5-10. Tips for operating the audio/visual system Station interference: When a device or its compliance with safety and regulatory stan- reflected signal and a signal received directly from a radio dards. Please note that the use of this accessory with an station are very nearly the same frequency, they can interfere Apple product may affect...
Page 440 5-10. Tips for operating the audio/visual system High-resolution sound Item source Compatible file MP4/AVI/WMV format (video) This device supports high-reso- lution sound sources. Folders in the Maximum device 3000 The definition of high-resolution Files in the Maximum is based on the standards of device 9999 groups such as the CTA (Con-...
Page 441 5-10. Tips for operating the audio/visual system File type Frequency (kHz) Quantization bit File type rate (bit) 8/11.025/12/16/ 22.05/24/32/ WAV (LPCM) ALAC 44.1/48/64/ files 88.2/96 16/24 FLAC 8/11.025/16/ ALAC 22.05/32/44.1/ OGG Vorbis Compatible channel modes : Only compatible with Windows Media Audio Standard File type Channel mode...
Page 442 5-10. Tips for operating the audio/visual system  When naming an  The player is compatible with VBR (Variable Bit Rate). MP3/WMA/AAC file, add an appropriate file extension  When playing back files (.mp3/.wma/.m4a). recorded as VBR (Variable Bit  This system plays back files Rate) files, the play time will not be correctly displayed if with .mp3/.wma/.m4a file...
Page 443 5-10. Tips for operating the audio/visual system Compatible video format Format Codec Video codec:  H.264/MPEG- 4 AVC  MPEG4 Audio codec:  AAC  The order changes depending  MP3 on the personal computer and MPEG-4 Corresponding MP3/WMA/AAC encoding screen size: software you use.
Page 444 5-10. Tips for operating the audio/visual system ding track-related information Format Codec in an MP3 file. This embed- Video codec: ded information can include  H.264/MPEG- the track number, track title, 4 AVC the artist’s name, the album  MPEG4 title, the music genre, the year ...
Page 445: Error Messages
USB mem- ory. ● If the malfunction is not rectified: Take your vehicle to your Toyota This indicates dealer. that no video “No video files files are included found.” in the USB mem-...
Page 446 5-10. Tips for operating the audio/visual system Certification For vehicles sold in the U.S.A., Hawaii, Guam, Saipan, American  Samoa and Puerto Rico...
Page 447 5-10. Tips for operating the audio/visual system For vehicles sold in Canada ...
Page 448 5-10. Tips for operating the audio/visual system Gracenote ...
Page 449 5-10. Tips for operating the audio/visual system For U.S. owners ...
Page 450: 5-11.Voice Command System
5-11. Voice command system operation Microphone ■ Voice command sys- 5-11.Voice command system operation The voice command sys- tem enables the radio, phone dialing, etc. to be operated using voice com- mands. Refer to the com- mand list for samples of voice commands.
Page 451 5-11. Voice command system operation After hearing a beep, say a NOTICE supported command. ● Do not touch and put a sharp  To display sample commands object to the microphone. It may cause failure. of the desired function, say the desired function or select Voice command system the desired function button.
Page 452 5-11. Voice command system operation voice command operation, screen. (P.414) select “Resume” or press the Press the talk switch. talk switch. Select the desired item to be set. ● If the system does not respond or the confirmation screen does not disappear, press the talk switch and try again.
Page 453: Command List
5-11. Voice command system operation Command list Command Action Returns to top “Start over” Command list overview menu screen Temporarily Recognizable voice commands pauses a voice and their actions are shown session until it is “Pause” below. resumed by pressing the talk ...
Page 454 5-11. Voice command system operation : When an Apple CarPlay connec- Command Action tion is established, this voice Places a call to commands will be unavailable. “Dial <phone the specified While incoming message number>” ■ phone number *1, 2 notification is displayed Places a call to the phone num- Command...
Page 455 Plays the selected track <name>” Command Action Plays tracks Activates the “Play Album “Launch <appli- from the Toyota Entune <name>” selected album App Suite Con- cation name>” nect application Plays tracks “Play Genre from the : When an Apple CarPlay connec- <name>”...
Page 456: Mobile Assistant
5-12. Mobile Assistant operation Mobile Assistant 5-12.Mobile Assistant operation Mobile Assistant opera- tion The Mobile Assistant func- Type A  tion is a voice input assist Press and hold the talk function. Mobile Assist sup- switch on the steering wheel ports the Siri Eyes Free until Mobile Assistant screen Mode and Google App.
Page 457 5-12. Mobile Assistant operation The Mobile Assistant can be Mobile Assistant and phone used only when the following call volumes are synchro- screen is displayed. nized. ● While a phone call is active, the Mobile Assistant cannot be used. ● If using the navigation feature of the cellular phone, ensure the ®...
Page 458: Quick Reference
5-13. Phone operation (Hands-free system for cellular phones) Quick reference 5-13.Phone operation (Hands-free system for cellular phones) Message function The following function can be Phone screen operation used on message function: The phone screen can be ®  Using the Bluetooth phone reached by the following meth- message function (P.469)
Page 459: Some Basics
5-13. Phone operation (Hands-free system for cellular phones) ● When using the hands-free sys- Some basics ® tem or Bluetooth audio and ® Wi-Fi Hotspot functions at the The hands-free system same time, the following problems may occur: enables calls to be made ®...
Page 460 5-13. Phone operation (Hands-free system for cellular phones) ® Connecting a Bluetooth ■ WARNING device ● Your audio unit is fitted with ® Registering an additional Bluetooth antennas. People  with implantable cardiac pace- device makers, cardiac resynchroniza- Display the phone top tion therapy-pacemakers or implantable cardioverter defibril- screen.
Page 461: Using The Phone
5-13. Phone operation (Hands-free system for cellular phones) (P.380) talking on the phone. Using the phone switch/microphone Steering switch ■ By pressing the phone switch, a call can be received or ended without taking your hands off the steering wheel. ●...
Page 462 5-13. Phone operation (Hands-free system for cellular phones) tered when the hands-free sys- Voice command system tem is used. When selling or Press this switch to operate the disposing of the vehicle, initial- voice command system. ize the data. (P.413) ...
Page 463: Placing A Call Using The Blue- Tooth Hands-Free System
5-13. Phone operation (Hands-free system for cellular phones) Placing a call using By call history ® the Bluetooth hands- Up to 30 of the latest call history free system items (missed, incoming and outgoing) can be selected. ® After a Bluetooth phone Display the phone top has been registered, a call...
Page 464 5-13. Phone operation (Hands-free system for cellular phones) Select the desired number. as follows: John (2) By favorites list Calls can be made using regis- tered contacts which can be selected from a contact list. (P.464) Display the phone top screen.
Page 465 5-13. Phone operation (Hands-free system for cellular phones) For PBAP compatible Blue- tacts from the connected cel- ■ lular phone. ® tooth phones when “Auto- Transfer the contact data to matic Transfer” is set to off the system using a Blue- (P.476) ®...
Page 466: Receiving A Call Using The Bluetooth Hands-Free Sys- Tem
5-13. Phone operation (Hands-free system for cellular phones) ® Receiving a call using tooth phone being connected, it may be necessary to perform ® the Bluetooth hands- additional steps on the phone. free system By home screen When a call is received, the Display the home screen.
Page 467: Talking On The Bluetooth
5-13. Phone operation (Hands-free system for cellular phones) ® Talking on the Blue- Bluetooth phone, both the sys- ® ® tooth hands-free sys- tem and Bluetooth phone may ring simultaneously when there is an incoming call. (P.474) While talking on the phone, the following screen is dis- played.
Page 468 5-13. Phone operation (Hands-free system for cellular phones) To cancel this function, select ● A continuous tone signal is a char- “Activate”. acter string that consists of num- bers and the characters “p” or “w”. Select to hang up the phone. (e.g.
Page 469: Bluetooth ® Phone Message Function
5-13. Phone operation (Hands-free system for cellular phones) ® current call is placed on hold. Bluetooth phone message function  When there is no current call, but there is a call on hold: “Activate” is displayed. When Received messages can be selected, the system switches forwarded from the con- to the call that was on hold.
Page 470 5-13. Phone operation (Hands-free system for cellular phones) screen. ● Depending on the type of Blue-  Account names are the ® tooth phone used for receiving names of the accounts that messages, or its registration sta- tus with the system, some infor- exist on the currently con- mation may not be displayed.
Page 471 5-13. Phone operation (Hands-free system for cellular phones) SMS case. Select to call the message ● E-mail only: Select “Mark Unread” sender. or “Mark Read” to mark mail unread or read on the message Select to have messages screen. read out. This function is available when To cancel this function, select “Update Message Read Status on...
Page 472 5-13. Phone operation (Hands-free system for cellular phones) Select “OK” when editing is Replying to a message completed. (quick reply) ● To reset the edited quick reply 15 messages have already messages, select “Default”. been stored. Display the message screen. Calling the message (P.469) sender...
Page 473 5-13. Phone operation (Hands-free system for cellular phones) Select the text area.  Identified phone numbers contained in the message are displayed in blue text. Select the desired number. Check that the dialing screen is displayed. ● A series of numbers may be rec- ognized as a phone number.
Page 474: Setup
5-14. Phone settings (P.476) Setup 5-14.Phone settings Message settings (P.482) Displaying the phone set- : This operation cannot be per- tings screen formed while driving. Press the “MENU” button. Sounds settings screen The call and ringtone volume can be adjusted. A ringtone can be selected.
Page 475 5-14. Phone settings Select the desired item to be Select to set the desired set. incoming e-mail tone. Select to set the desired incoming SMS/MMS tone. Select “-” or “+” to adjust the incoming SMS/MMS tone volume. Select “-” or “+” to adjust the incoming e-mail tone volume.
Page 476 5-14. Phone settings screen. Select the desired item to be set. Select to set the e-mail notifi- cation pop-up on/off. Select to change the incom- ing e-mail display. “Full Screen”: When an e- mail is received, the incoming e-mail display screen is dis- played and can be operated on the screen.
Page 477 5-14. Phone settings contact list. (P.479) Select to set automatic con- tact/history transfer on/off. Select to delete contacts When set to on, the phone’s from the contact list. contact data and history are (P.480) automatically transferred. Select to set the voice tags. Select to update contacts (P.481) from the connected phone.
Page 478 5-14. Phone settings the phone.  To cancel this function, select “Cancel”. Updating the contacts in a ■ different way (from the call Check that a confirmation screen is displayed when the history screen) operation is complete. Display the phone top When the contact is regis- screen.
Page 479 5-14. Phone settings phone is removed before down- ® Bluetooth phone to this sys- loading is complete. tem. Connect a USB device. Registering a new contact (P.419) to the contacts list Select “Transfer Contacts New contact data can be regis- from Device”.
Page 480 5-14. Phone settings Registering the contacts in ■ Editing the contact data the favorites list For PBAP compatible Blue- Select “Add Favorite”. ® tooth phones, this function is Select the desired contact to available when “Automatic add to the favorites list. Transfer”...
Page 481 5-14. Phone settings Deleting the contacts in the Select the desired item to be ■ set. favorites list Select “Remove Favorite”. Select the desired contacts and select “Remove”. Select “Yes” when the confir- mation screen appears. Check that a confirmation screen is displayed when the operation is complete.
Page 482 5-14. Phone settings Deleting the voice tag When set to on, messaging ■ account names used on the Select “Delete”. cellular phone will be dis- Select the desired contact played. and select “Delete”. Select to set adding the vehi- Select “Yes” when the confir- cle signature to outgoing mation screen appears.
Page 483 5-14. Phone settings Enter desired signature with using keyboard. Select “OK”. Select “OK” on the confirma- tion screen, or select “Edit Again” when it needs to amend.
Page 484: 5-15.What To Do If
® Bluetooth device, first firmed on this check the table below. system, check with your Toyota dealer or the fol- Troubleshooting The connected lowing website: device may not http://www. When using the hands-free be a compatible toyota.com/...
Page 485 ® 5-15. What to do if... (Bluetooth Likely cause Solution Likely cause Solution An incorrect Set automatic Enter the correct passcode was Automatic Blue- ® Bluetooth con- passcode on the entered on the ® tooth connec- nection on this cellular phone. cellular phone.
Page 486 (P.477) system, check ® When using the Bluetooth with your Toyota The profile ver- message function ■ dealer or the fol- sion of the con- lowing website: Messages cannot be viewed.
Page 487 ® 5-15. What to do if... (Bluetooth screen each time the engine Likely cause Solution switch is in ACC or ON. Turn the cellular phone off, Likely cause Solution remove and rein- To turn off the stall the battery Connection con- display, set con- pack, and then firmation display...
Page 488: Toyota Entune
5-16.Toyota Entune overview ● Each function is available in the following areas: Toyota Entune is a service • Toyota Entune App Suite Connect is available in the contiguous that includes Toyota Entune United States, Washington D.C., App Suite Connect, Toyota Alaska, Hawaii, Puerto Rico and Canada.
Page 489: Type A: Function Achieved By Using A Smartphone Or Dcm
• Toyota Entune App Suite Connect enables applicable apps installed on the system to be displayed on and operated from the screen. A few settings must be performed before Toyota Entune App Suite Connect can be used. (P.490) By using a smartphone or DCM Content provider Provides contents to the application server.
Page 490 5-16. Toyota Entune overview Application server Provides applications to the system or a smartphone. Smartphone Using the Toyota Entune App Suite Connect, communication is relayed between the system, application server and contents pro- vider. The smartphone cannot be operated while communicating. Applications Display usable content from the content providers on the screen using the data connection of the connected smartphone or DCM.
Page 491 Puerto Rico. the system. ● These functions are not made In order to use Toyota Entune App available in some countries or Suite Connect, the following must areas. Availability of functions of first be performed: the Toyota Entune App Suite Con- ®...
Page 492: Type B: Function Achieved By Using Dcm And The System
These services are available by subscription on select, telematics hardware-equipped vehicles and supported by the Toyota Entune center, which operates 24 hours a day, 7 days a week. ® For details about Wi-Fi Hotspot:P.403...
Page 493: Type C: Function Achieved By Using Dcm
ANSI Standard The functionality of Safety (C95.1). Connect is made possible ● The design of Toyota Entune sys- by the use of a DCM. tem complies with the FCC guide- lines in addition to those For details, (P.65) standards.
Page 494 5-16. Toyota Entune overview For vehicles sold in the U.S.A., Canada and Puerto Rico ...
Page 495: Type D: Function Achieved By Using Dcm And A Smart- Phone
P.65), download the view of the user when operating Toyota Entune Remote Connect. Toyota Entune Remote Con- In some states, use of Toyota nect app from your smart- Entune Remote Connect may vio- phone’s app store, and late state or local laws. Before...
Page 496 5-16. Toyota Entune overview above approximately -22 °F (-30 °C). This specification is related to the Toyota Entune Remote Con- nect operation, but is dependent on the vehicle’s operating tem- perature range which may be dif- ferent. ● Content is subject to change with- out notice.
Page 497: 5-17.Toyota Entune Operation
5-17. Toyota Entune operation Select “Apps”. Toyota Entune App 5-17.Toyota Entune operation Suite Connect Follow the steps in “From the “APPS” button” from step 3. (P.496) App Suite is a function that enables certain apps From the “APPS” button ...
Page 498 Check that installing is your phone.” started. The Toyota Entune App Suite Con- “Install in Background”: Select to nect application cannot be con- operate other functions while installing.
Page 499 888-869-6828 in Canada, and by changing to the application 1-877-855-8377 in Puerto screen and pressing the “Install” Rico.” switch. The Toyota Entune App Suite Con-  “Application download error. nect application cannot be con- Please try again later.” ® SPP.
Page 500 5-17. Toyota Entune operation board or voice recognition func- Press the talk switch. (P.450) tion. For details about the functions and services provided Say the desired keyword. by each application, refer to  Completion of the keyword http://www.toyota.com/Entune/ will be detected automatically.
Page 501: 5-18.Entune Settings
(P.500) Toyota Entune App 5-18.Entune settings Suite Connect settings Select to detect iPhone app automatically on/off. The settings of Toyota Select to turn on/off the Entune App Suite Connect enhanced USB connection can be changed. mode. • When an iPhone is connected while this setting is “On”, commu-...
Page 502 5-18. Entune settings Display the Toyota Entune App Suite Connect settings screen. (P.500) Select “Data Usage Mes- sage”. Change the setting as desired.
Page 503: Interior Features
Interior features 6-1. Using the air conditioning system and defogger Manual air conditioning sys- tem ......Automatic air conditioning system....... Heated steering wheel/seat heaters/seat ventilators ........6-2. Using the interior lights Interior lights list ..6-3. Using the storage features List of storage features Luggage compartment fea- tures ......
Page 504: Using The Air Conditioning System And Defogger Manual Air Conditioning Sys- Tem
6-1. Using the air conditioning system and defogger Manual air conditioning system 6-1.Using the air conditioning system and defogger : If equipped Air conditioning controls Fan speed control switch Temperature control switch On/off switch Windshield defogger switch Rear window defogger and outside rear view mirror defoggers switch Airflow mode control switch Outside/recirculated air mode switch...
Page 505 6-1. Using the air conditioning system and defogger Set cooling and dehumidifi- fan. ■ cation function Change the airflow mode ■ Press the “A/C” switch. Press the airflow mode control switch. When the function is on, the indica- tor illuminates on the “A/C” switch. The airflow mode changes as fol- lows each time the switch is Defogging the windshield...
Page 506 6-1. Using the air conditioning system and defogger gers switch is on, the indicator illu- as tunnels or in heavy traffic, set the outside/recirculated air mode switch minates on the rear window to the recirculated air mode. This is defogger and outside rear view mir- effective in preventing outside air ror defoggers switch.
Page 507: Tem
6-1. Using the air conditioning system and defogger off, press the Stop & Start cancel NOTICE switch to deactivate the system. ■ To prevent battery discharge ■ When the windshield is fogged up and the engine is stopped Do not leave the air conditioning due to the Stop &...
Page 508 6-1. Using the air conditioning system and defogger Close the vent Rear (if equipped)  Direct air flow to the left or right, up or down Open the vent Close the vent WARNING ■ To not interrupt the wind- shield defogger from operat- Do not place anything on the instrument panel which may cover the air outlets.
Page 509: Automatic Air Conditioning System
6-1. Using the air conditioning system and defogger Automatic air conditioning system Air outlets and fan speed are automatically adjusted accord- ing to the temperature setting. Air conditioning controls Automatic mode switch Left-hand side temperature control knob Right-hand side temperature control knob “SYNC”...
Page 510 6-1. Using the air conditioning system and defogger decreases the temperature. The air conditioning system switches between individual and simultaneous modes each time the “SYNC” switch is pressed. Simultaneous mode (the indicator on the “SYNC” switch is on): The driver’s side temperature con- trol dial can be used to adjust the temperature for the driver’s and passenger’s side.
Page 511 6-1. Using the air conditioning system and defogger tized such as reducing fan S-FLOW mode. speed, etc. Depending on the set tempera- Press the eco air conditioning ture, operation in S-FLOW mode switch. mode may not change as described above. When the eco air conditioning mode is on, the indicator illumi- When certain conditions are met...
Page 512 6-1. Using the air conditioning system and defogger mode when opening and closing a gers switch is on, the indicator illu- rear door, switch to automatic S- minates on the rear window FLOW mode. (P.513) defogger and outside rear view mir- ror defoggers switch.
Page 513: System
6-1. Using the air conditioning system and defogger After only the front passenger side Eco driving mode, the air condi- tioning eco mode will be turned on door is opened and closed, when automatically. Even in this case, the vehicle is driven at 12 mph (20 the air conditioning eco mode can km/h) or more, the system deter- be turned off by pressing the Eco...
Page 514 6-1. Using the air conditioning system and defogger temperature etc. or air blowing When the outside rear view ■ stops. To stop the air conditioning mirror defoggers are operat- system from turning off, press the ing (if equipped) Stop & Start cancel switch and Do not touch the rear view mirror refrain from using the Stop &...
Page 515 6-1. Using the air conditioning system and defogger Windshield wiper de-icer (if equipped) This feature is used to prevent ice from building up on the wind- shield and wiper blades. Press the switch to turn the sys- tem on/off. The indicator comes on when If equipped the system is on.
Page 516: Heated Steering Wheel * /Seat Heat- * Ers * /Seat Ventilators
6-1. Using the air conditioning system and defogger right, up or down Heated steering Open the vent wheel /seat heat- /seat ventilators Close the vent WARNING : If equipped ■ To not interrupt the wind-  Heated steering wheel shield defogger from operat- Warm up the grip of the steer- Do not place anything on the ing wheel...
Page 517 6-1. Using the air conditioning system and defogger NOTICE ■ To prevent damage to the seat heaters and seat ventila- tors Do not put heavy objects that have an uneven surface on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.
Page 518 6-1. Using the air conditioning system and defogger ■ Air conditioning system-linked WARNING control mode ■ To prevent causes of over- When a seat ventilator is set to Hi, heating and minor burn inju- the fan speed of the seat ventilator ries may increase according to the fan speed of the air conditioning sys-...
Page 519: Using The Interior Lights
6-2. Using the interior lights Interior lights list 6-2.Using the interior lights Location of the interior lights Rear interior light (P.520) Front interior lights/personal lights (P.519, 520) Open tray lights (if equipped) Footwell lights (if equipped) Front cup holder lights (if equipped) : These lights turn on when a door is unlocked.
Page 520: Rear Interior Light
6-2. Using the interior lights Turns the door position on ■ Illuminated entry system When a door is opened while the The lights automatically turn on/off door position is on, the lights turn according to the engine switch mode, the presence of the elec- tronic key, whether the doors are Turns the lights off locked/unlocked, and whether the...
Page 521 6-2. Using the interior lights NOTICE ■ To prevent battery discharge Do not leave the lights on longer than necessary when the engine is not running.
Page 522: 6-3. Using The Storage Features
6-3. Using the storage features List of storage features 6-3.Using the storage features Location of the storage features Open tray (P.525) Auxiliary boxes (P.524) Bottle holders (P.524) Console box (P.523) Cup holders (P.523) Glove box (P.522) ● Lighters or spray cans may WARNING explode.
Page 523: Cup Holders
6-3. Using the storage features WARNING ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking. Cup holders Front  WARNING ■ Caution while driving Keep the glove box closed. In the event of sudden braking or sud- den swerving, an accident may occur due to an occupant being...
Page 524: Bottle Holders
6-3. Using the storage features WARNING WARNING ■ Items unsuitable for the cup ■ Items unsuitable for the bottle holders holders Do not place anything other than Do not place anything other than cups or beverage cans in the cup a bottle in the bottle holders.
Page 525: Open Tray
6-3. Using the storage features Front of console  WARNING ■ Caution while driving Do not leave the auxiliary box (type A) open while driving. Injuries may result in the event of an accident or sudden braking. ■ Items unsuitable for storing (type A) Do not store items heavier than 0.4 lb.
Page 526: Luggage Compartment Fea- Tures
6-3. Using the storage features Setting the deck board ■ Luggage compart- underside (resin side) up ment features Cargo hooks Raise the hook to use. The cargo hooks are provided for securing loose items. Original position Underside (resin side) WARNING Changing the deck board ■...
Page 527 6-3. Using the storage features Pull up the tab to raise the place the rear edge into the deck board and move it holes. toward you to remove WARNING ■ When operating the deck board Do not place anything on the deck board when operating the board.
Page 528 6-3. Using the storage features Removing the luggage ■ ■ Removing the partition plate cover Release the cover from the left and right anchors and allow it to retract. Disengage the claws Luggage cover (if equipped) Installing the luggage cover ■...
Page 529 6-3. Using the storage features Place the both ends of the luggage cover into the holder. WARNING ■ Luggage cover ● When installing/stowing the lug- gage cover, make sure that the luggage cover is securely installed/stowed. Failure to do so may result in serious injury in the event of sudden braking or a collision.
Page 530: 6-4. Using The Other Interior Features
6-4. Using the other interior features the engine switch is turned to OFF, Other interior features 6-4.Using the other interior features the lights will go off automatically after 20 minutes. Sun visors NOTICE ■ To prevent battery discharge Do not leave the vanity lights on for extended periods while the engine is off.
Page 531 6-4. Using the other interior features Rear (if equipped)  ■ The power outlet can be used Open the lid. when 12 V  The engine switch is in ACC or ON. 120 VAC  The engine switch is in ON. ■...
Page 532 6-4. Using the other interior features Using the USB charging ■ NOTICE ports ● 120 VAC Console box  Do not use a 120 VAC appliance that requires more than 100 W. If Open the console box and open a 120 VAC appliance that con- the lid.
Page 533 6-4. Using the other interior features cle has been parked in the sun Wireless charger (if ■ About connected external equipped) devices Depending on the connected exter- A portable device can be nal device, charging may occasion- charged by just placing Qi stan- ally be suspended and then start dard wireless charge compatible again.
Page 534 6-4. Using the other interior features Name for all parts cator light (orange) comes on. ■ If charging is not occurring, try plac- ing the portable device as close to the center of the charging area as possible. When charging is complete, the operation indicator light (green) comes on.
Page 535 Vehicle to char- Contact your ger communica- Toyota dealer. ■ The wireless charger can be tion failure. operated when The engine switch is in ACC or ON. ■ Usable portable devices...
Page 536 6-4. Using the other interior features ■ When covers and accessories ■ Important points of the wire- are attached to portable devices less charger Do not charge in situations where ● If the electronic key cannot be cover and accessories not able to detected within the vehicle inte- handle Qi are attached to the porta- rior, charging cannot be done.
Page 537 6-4. Using the other interior features...
Page 538 6-4. Using the other interior features...
Page 539 6-4. Using the other interior features WARNING NOTICE ■ Caution while driving ■ Conditions in which the func- tion may not operate cor- When charging a portable device, rectly for safety reasons, the driver should not operate the main part In the following conditions, it may of the portable device while driv- not operate correctly...
Page 540: Assist Grips
NOTICE tioning. Contact authorized Toyota ■ To prevent damage to the dealer. armrest ■ To prevent failure or damage...
Page 541: Garage Door Opener
6-4. Using the other interior features Garage door opener NOTICE ■ To prevent damage to the : If equipped assist grip The garage door opener can Do not hang any heavy object or put a heavy load on the assist be programmed using the grip.
Page 542 6-4. Using the other interior features operating. ® appears even while the HomeLink is operating. Buttons Garage door operation indi- Vehicles with Digital Rear-  cators view Mirror ® HomeLink indicator light Illuminates above each button selected. Buttons ■ Codes stored in the Home- ®...
Page 543: Programming Homelink
 ■ When support is necessary ■ When operating or program- Visit on the web at www.home- ® ming HomeLink link.com/toyota or call 1-800-355- Never allow a child to operate or 3515. ® play with the HomeLink buttons. WARNING ®...
Page 544 6-4. Using the other interior features  Garage door opener motors Program a device. manufactured after 1995 may be equipped with rolling code protection. If this is the case, you may need a stepladder or other sturdy, safe device to reach the “Learn”...
Page 545 6-4. Using the other interior features door opener motor for details. ®  HomeLink indicator light illu- minates: Programming of a fixed code device has com- pleted. The garage door or other device should operate ® when a HomeLink button is pressed and released.
Page 546 6-4. Using the other interior features pleted. Press a programmed Home- ® Link button to operate a garage door. Within 1 minute of pressing ® the HomeLink button, after the garage door operation has stopped, press the Enabling 2-way communi- ■...
Page 547 6-4. Using the other interior features Vehicles with Digital Rear-  ■ Before programming view Mirror ● Install a new battery in the trans- mitter. ● The battery side of the transmitter must be pointed away from the ® HomeLink buttons.
Page 548 6-4. Using the other interior features (vehicles with auto anti-glare inside rear view mirror), (vehicles with Digital Rear-view Mirror) simultaneously. The last recorded status will be dis- played for 3 seconds. Erasing the entire Home- ® Link memory (all three codes) Press and hold the 2 outside buttons for 10 seconds until the...
Page 549: Maintenance And Care
Maintenance and care 7-1. Maintenance and care Cleaning and protecting the vehicle exterior ..Cleaning and protecting the vehicle interior ... 7-2. Maintenance Maintenance requirements ........General maintenance.. Emission inspection and maintenance (I/M) pro- grams ......7-3. Do-it-yourself mainte- nance Do-it-yourself service pre- cautions.....
Page 550: 7-1. Maintenance And Care
For vehicles with 19-inch matte vehicle. Make sure to extend the painted wheels: The wheels are not maintained in the same way mirrors before driving. as normal aluminum wheels. For ● Brushes used in automatic car details, contact your Toyota...
Page 551 7-1. Maintenance and care dealer. When cleaning the windshield ■ • When washing the vehicle, use (vehicles with rain-sensing water to wash off dirt. If the vehi- windshield wipers) cle is particularly dirty, use a Set the wiper switch to off. diluted neutral detergent and a If the wiper switch is in “AUTO”, sponge or a soft cloth and wash...
Page 552 ● Do not apply wax to the sur- may malfunction. If this occurs, faces of the lights. consult your Toyota dealer. Wax may cause damage to the lenses. NOTICE ■ When using an automatic car wash (vehicles with rain- ■...
Page 553: Cleaning And Protecting The Vehicle Interior
7-1. Maintenance and care Cleaning and protect- NOTICE ing the vehicle interior ● Keep the cleaning nozzle at least 11.9 in. (30 cm) away from the vehicle body. Otherwise Perform cleaning in a man- resin section, such as moldings ner appropriate to each and bumpers, may be deformed and damaged.
Page 554 7-1. Maintenance and care Do not use a polish wax or pol- ● WARNING ish cleaner. The instrument ■ Water in the vehicle panel’s or other interior part’s painted surface may be dam- ● Do not splash or spill liquid in aged.
Page 555 Allow the leather to dry in a shaded and ventilated area. ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior.
Page 556: 7-2. Maintenance
■ Repair and replacement exposure and wash any It is recommended that genuine affected area immediately. Toyota parts be used for repairs to ● Battery posts, terminals and ensure performance of each sys- related accessories contain lead tem. If non-Toyota parts are used in...
Page 557: General Maintenance
Please be aware that do-it-your- self maintenance may affect Check the connec- Battery warranty coverage. tions. (P.571) The use of Toyota Repair Manuals Is the brake fluid at is recommended. Brake fluid the correct level? (P.569) For details about warranty cover- age, refer to the separate “Owner’s...
Page 558 7-2. Maintenance Items Check points Items Check points There should not • The vehicle Exhaust sys- be any fumes or should not pull to strange sounds. one side when the brakes are The radiator and applied. condenser should Radiator/con- • The brakes be free from for- denser should work...
Page 559 7-2. Maintenance Items Check points Items Check points • Do the seat belts • Is the tire infla- operate tion pressure smoothly? correct? Seat belts • The seat belts • The tires should should not be not be damaged damaged. or excessively worn.
Page 560: Emission Inspection And Maintenance (I/M) Programs
I/M test where in the emission control system. Your vehicle may not Contact your Toyota dealer to pass the I/M test and may need prepare the vehicle for re-test- to be repaired. Contact your ing.
Page 561: Do-It-Yourself Service Precautions
7-3. Do-it-yourself maintenance Do-it-yourself service 7-3.Do-it-yourself maintenance Items Parts and tools precautions • “Toyota Super Long Life Cool- ant” or a similar If you perform maintenance high quality eth- by yourself, be sure to fol- ylene glycol-based low the correct procedure as non-silicate, non- given in these sections.
Page 562 7-3. Do-it-yourself maintenance Items Parts and tools Do not leave anything that may ● burn easily, such as paper and • Bulb with same rags, in the engine compart- number and watt- ment. age rating as origi- ● Do not smoke, cause sparks or expose an open flame to fuel or Light bulbs •...
Page 563: Hood
7-3. Do-it-yourself maintenance Hold the hood open by insert- Hood ing the supporting rod into the slot. Release the lock from the inside of the vehicle to open the hood. Opening the hood Pull the hood lock release lever. The hood will pop up slightly. WARNING ■...
Page 564: Positioning A Floor Jack
7-3. Do-it-yourself maintenance Positioning a floor NOTICE jack ■ When closing the hood Be sure to return the support rod to its clip before closing the hood. When using a floor jack, fol- Closing the hood without return- low the instructions in the ing the support rod properly could manual provided with the cause the hood to bend.
Page 565 7-3. Do-it-yourself maintenance Rear ■...
Page 566: Engine Compartment
7-3. Do-it-yourself maintenance Engine compartment Components Fuse box (if equipped) (P.597) Engine oil filler cap (P.566) Engine oil level dipstick (P.566) Battery (P.571) Brake fluid reservoir (P.569) Radiator (P.569) Electric cooling fan Condenser (P.569) Washer fluid tank (P.572) Engine coolant reservoir (P.568) check the oil level on the dip- Checking and adding the stick.
Page 567 7-3. Do-it-yourself maintenance Checking the engine oil Wipe the dipstick and reinsert ■ it fully. Park the vehicle on level ground. After warming up the Checking the oil type and ■ engine and turning off the preparing the items needed engine, wait more than 5 Make sure to check the oil type minutes for the oil to drain...
Page 568 Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recy- cling or disposal.
Page 569: Brake Fluid
If you spill coolant ■ ■ Coolant selection Be sure to wash it off with water to Only use “Toyota Super Long Life prevent it from damaging parts or Coolant” or a similar high quality paint. ethylene glycol based non-silicate,...
Page 570 7-3. Do-it-yourself maintenance Remove the reservoir cap. Adding fluid ■ Slide and lift up the rubber Add brake fluid slowly while strip to partly remove it as checking the fluid level. shown. Make sure to check the fluid type and prepare the necessary item.
Page 571: Checking The Battery
7-3. Do-it-yourself maintenance cables to the battery. NOTICE ■ After recharging/reconnecting ■ If the fluid level is low or high the battery (vehicles with smart key system) It is normal for the brake fluid level to go down slightly as the brake The engine may not start.
Page 572 7-3. Do-it-yourself maintenance If electrolyte gets on your skin ● WARNING Wash the affected area thor- ■ Chemicals in the battery oughly. If you feel pain or burn- ing, get medical attention A battery contains poisonous and immediately. corrosive sulfuric acid and may produce hydrogen gas which is ●...
Page 573: Tires
7-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with mainte- nance schedules and tread- wear. Checking tires WARNING Check if the treadwear indica- ■ When adding washer fluid tors are showing on the tires. Do not add washer fluid when the Also check the tires for uneven engine is hot or running as wear, such as excessive wear...
Page 574 All season tires, how- If you are not sure, consult with your Toyota dealer. ever, do not have adequate traction performance compared with snow ■ Tire life tires in heavy or loose snow.
Page 575: Tire Rotation
Do not mix tires of different makes, models or tread pat- To equalize tire wear and extend terns. tire life, Toyota recommends that Also, do not mix tires of remark- tire rotation is carried out at the ably different treadwear.
Page 576 The illustration used is intended operate properly. as an example, and may differ • If non-genuine Toyota wheels are from the image that is actually used. • A tire has been replaced with a displayed on the multi-informa- tire that is not an OE (Original tion display.
Page 577 7-3. Do-it-yourself maintenance warning valves and transmitters the radio wave conditions. are used. ● When the vehicle is parked, the • If the ID code on the tire pressure time taken for the warning to start warning valves and transmitters is or go off could be extended.
Page 578 Have tire pressure pressure display function warning valve and transmitter ID When new tire pressure warning codes registered by your Toyota valves and transmitters are dealer. installed, new ID codes must be : The country of production is writ-...
Page 579 Adjust the tire inflation pres- warning valves and transmit- sure to the specified cold tire ters, contact your Toyota dealer inflation pressure level. as the tire pressure warning valves and transmitters may be (P.664) damaged if not handled cor- rectly.
Page 580 7-3. Do-it-yourself maintenance Press of the meter Press of the meter control switches, select control switches on the steer- “Vehicle Settings” and then ing wheel and select press Press of the meter control switches, select “TPWS” and then press Press of the meter control switches, select the “Set Pressure”.
Page 581 Initial- sure settings are unsuccessful, ization is performed while driving have the vehicle inspected by your at a vehicle speed of approxi- Toyota dealer. mately 25 mph (40 km/h) or more. ● When operating the tire pressure ●...
Page 582 • If, when the vehicle has been driven for about 20 minutes after ID codes can be registered at performing initialization, the tire your Toyota dealer. When 2 sets pressure warning light blinks for of ID codes have been regis- approximately 1 minute and then illuminates.
Page 583 7-3. Do-it-yourself maintenance Park the vehicle in a safe the multi-information display. place, wait for approximately 20 minutes, and then start the engine. Press of the meter control switches on the steer- ing wheel and select Press of the meter control switches and select Drive the vehicle at approxi- “Vehicle Settings”, and then...
Page 584 If the ID codes cannot be registered even when performing the above ■ If ID codes are not registered procedure, contact your Toyota properly dealer. In the following situations, ID code registration may take longer than usual to be completed or may not be possible.
Page 585: Tire Inflation Pressure
Make sure to maintain the proper tire inflation pres- sure. Tire inflation pressure should be checked at least once per month. However, Toyota recommends that tire inflation pressure be checked once every two weeks. (P.664) Tire valve Checking the specified...
Page 586 ● Uneven wear ● Damage to the drive train If a tire needs frequent inflating, ● Poor handling have it checked by your Toyota dealer. ● Possibility of blowouts resulting from overheated tires ■ Instructions for checking tire inflation pressure ●...
Page 587: Wheels
Replacement wheels are avail- to come off while driving, which able at your Toyota dealer. could lead to an accident result- ing in death or serious injury. : Conventionally referred to as off- set.
Page 588 ■ Use of defective wheels pro- tire chains. hibited  Use only Toyota genuine bal- Do not use cracked or deformed wheels. ance weights or equivalent Doing so could cause the tire to and a plastic or rubber ham-...
Page 589: Air Conditioning Filter
7-3. Do-it-yourself maintenance With the glove box fully open, Air conditioning filter slightly lift up the glove box and pull toward the seat to The air conditioning filter detach the bottom of the must be changed regularly glove box. to maintain air conditioning Do not use excessive force if the efficiency.
Page 590 7-3. Do-it-yourself maintenance Remove the filter case. NOTICE ■ When using the air condition- ing system Make sure that a filter is always installed. Using the air conditioning system without a filter may cause damage to the system. ■ When removing the glove box Always follow the specified proce- Remove the air conditioning dure to remove the glove box...
Page 591: Wiper Insert Replacement
7-3. Do-it-yourself maintenance driver with a rag. Wiper insert replace- ment When replacing the wiper insert, perform the following procedure to operate each wiper. Windshield wipers Slide the wiper blade to remove it from the wiper arm. Windshield wiper blade ■...
Page 592: Rear Window Wiper
7-3. Do-it-yourself maintenance the claw detaches, and then Stopper remove the wiper blade from Claw the wiper arm. Remove the 2 metal plates from the wiper insert pulled out, and install the plates to a new wiper insert. Make sure that the cutout location and warp direction of the metal blades are same as the original.
Page 593 Applying a small amount of washer about replacing the wiper blades or fluid to the wiper insert can make it wiper insert yourself, contact your easier to insert the claws into the Toyota dealer. grooves. NOTICE ■ When lifting the windshield wipers ●...
Page 594: Wireless Remote Control/Elec- Tronic Key Battery
 Small flathead screwdriver  Lithium battery CR2032 ■ Use a CR2032 lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manufacturer.
Page 595 7-3. Do-it-yourself maintenance To prevent damage to the key, cover into the key. cover the tip of the screwdriver with a rag. Install the key cover. Align the key cover with the key Remove the battery cover. and then press it straight into the If the battery cover is difficult to key.
Page 596 7-3. Do-it-yourself maintenance the cover damaged. WARNING To prevent damage to the key, ■ Removed battery and other cover the tip of the flathead screw- parts driver with a rag. These parts are small and if swal- lowed by a child, they can cause choking.
Page 597: Checking And Replacing Fuses
7-3. Do-it-yourself maintenance Engine compartment: Type B Checking and replac-  fuse box ing fuses ) and ( Push claw ( ) to com- pletely release the lock, and then lift If any of the electrical com- up the cover. ponents do not operate, a fuse may have blown.
Page 598 ● Do not modify the fuses or fuse boxes. NOTICE ■ Before replacing fuses Have the cause of electrical over- load determined and repaired by your Toyota dealer as soon as possible. Normal fuse Blown fuse...
Page 599: Light Bulbs
As there is a dan- ger that components may be damaged, we recom- mend that replacement is carried out by your Toyota dealer. Preparing for light bulb replacement Check the wattage of the light bulb to be replaced.
Page 600 LED lights The lights other than the following lights each consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. ● Front turn signal lights Front turn signal/parking ●...
Page 601 7-3. Do-it-yourself maintenance Front side marker lights ■ Replacing light bulb (type A and B) Front turn signal ■ Turn the bulb base counter- lights/parking lights (type A clockwise. and B) Turn the bulb base counter- clockwise. Remove the light bulb. Remove the light bulb.
Page 602 7-3. Do-it-yourself maintenance Fog lights (if equipped) Remove the screws and ■ clips, partly remove the To allow enough working fender liner. space, turn the steering wheel. Remove the screws. Unplug the connector Turn the bulb base counter- clockwise.
Page 603 7-3. Do-it-yourself maintenance Set the new light bulb. Reinstall the fender liner. Align the 3 tabs on the light bulb with the mounting, and insert. Turn it clockwise to set. Set the connector. Shake the bulb base gently to check that it is not loose, turn the front fog lights on once and visually confirm that no light is leaking through the mounting.
Page 604 7-3. Do-it-yourself maintenance Remove the securing screws turning the bulb base clock- and remove the unit. wise. Remove the lamp assembly by pull- ing it directly backward from the rear of the vehicle. Align the grooves on the light unit with the claws, and insert the light unit straight so that Turn the bulb base counter- the pin on the light unit fit into...
Page 605 7-3. Do-it-yourself maintenance Reinstall the cover. before turning the bulb base. Back-up lights ■ Open the back door and remove the cover. To prevent damage to the cover, Remove the light bulb. protect the tip of the screwdriver with a rag. Install a new light bulb.
Page 606 7-3. Do-it-yourself maintenance again after installing the bulb base. not drop the mirror. Reinstall the cover. Disconnect the connectors behind the mirror, and remove the mirror. Make sure to check the connectors, to avoid connecting upside down when reinstalling. Work carefully, ensuring that you do not drop the mirror.
Page 607 7-3. Do-it-yourself maintenance Disconnect the tabs behind not damage the tabs. the mirror cover, and remove the mirror cover. Fold the mirror before remov- ing the light unit. Turn the bulb base counter- clockwise. Remove the cord from the clip before turning the bulb base.
Page 608 7-3. Do-it-yourself maintenance Remove the light bulb. install the two screws. Install a new light bulb then install the bulb base to the light unit by inserting it and turning the bulb base clock- 10Extend the mirror. wise. Secure the cord with the clip back again after installing the bulb base.
Page 609 7-3. Do-it-yourself maintenance 12Reconnect the connectors of WARNING the mirror. ■ Replacing light bulb ● Turn off the light. Do not attempt to replace the bulb immediately after turning off the light. The bulb become very hot and may cause burns. ●...
Page 610 7-3. Do-it-yourself maintenance...
Page 611: When Trouble Arises
When trouble arises If the vehicle becomes stuck 8-1. Essential information ........Emergency flashers ..If your vehicle has to be stopped in an emergency ........If the vehicle is trapped in rising water....8-2. Steps to take in an emer- gency If your vehicle needs to be towed......
Page 612: Emergency Flashers
8-1. Essential information Emergency flashers If your vehicle has to 8-1.Essential information be stopped in an emer- gency The emergency flashers are used to warn other drivers when the vehicle has to be Only in an emergency, such stopped in the road due to a as if it becomes impossible breakdown, etc.
Page 613: If The Vehicle Is Trapped In Rising Water
8-1. Essential information If the vehicle is trapped in rising water In the event the vehicle is submerged in water, remain calm and perform the fol- lowing.  Remove the seat belt first. Vehicles with smart key sys-   If the door can be opened, open the door and exit the Press and hold the engine switch vehicle.
Page 614 However, an emergency hammer can not shat- ter the windshield as it is lami- nated glass. : Contact your Toyota dealer, or aftermarket accessory manu- facturer for further information about an emergency hammer. ■ Escaping the vehicle from the...
Page 615: 8-2. Steps To Take In An Emergency
8-2. Steps to take in an emergency If your vehicle needs 8-2.Steps to take in an emergency When towing the vehicle ■ to be towed 2WD models  Be sure to transport the vehicle with the front wheels raised or If towing is necessary, we with all four wheels raised off the recommend having your...
Page 616 With- before towing out adequate clearance, the vehicle could be damaged while The following may indicate a being towed. problem with your transmission. Contact your Toyota dealer or...
Page 617: Using A Flatbed Truck
8-2. Steps to take in an emergency commercial towing service before towing.  The engine is running but the vehicle does not move.  The vehicle makes an abnor- mal sound. Towing with a sling-type From the rear  truck Use a towing dolly under the Do not tow with a sling-type front wheels.
Page 618 8-2. Steps to take in an emergency downs or the vehicle may be Take out the towing eyelet. (P.637) damaged. Using a flathead screwdriver, remove eyelet cover ( and then remove eyelet cover ( To protect the bodywork, place a rag between the screwdriver and the vehicle body as shown in the illustration.
Page 619 8-2. Steps to take in an emergency Type A Type B   Type B Securely attach cables or  chains to the towing eyelet. Take care not to damage the vehi- cle body. Enter the vehicle being towed and start the engine. Turn off the Parking Support Brake function.
Page 620: If You Think Something Is Wrong
 Loss of brake effectiveness, vehicle probably needs spongy feeling, pedal almost adjustment or repair. Con- touches the floor tact your Toyota dealer as soon as possible. Visible symptoms  Fluid leaks under the vehicle (Water dripping from the air conditioning after use is nor- mal.)
Page 621 8-2. Steps to take in an emergency Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine.
Page 622: If A Warning Light Turns On Or A Warning Buzzer Sounds
(Red) Brake system warning light ■ Warning light Details/Actions Indicates a malfunction in the parking brake sys-  Have the vehicle inspected by your Toyota (Yellow) dealer immediately. Charging system warning light ■ Warning light Details/Actions Indicates a malfunction in the vehicle’s charging system ...
Page 623: Malfunction Indicator Lamp
Indicates a malfunction in:  The electronic engine control system;  The electronic throttle control system; or (U.S.A.)  The emission control system (if equipped)  Have the vehicle inspected by your Toyota dealer immediately. (Canada) SRS warning light ■...
Page 624 ■ Warning light Details/Actions Indicates a malfunction in:  The ABS; or (U.S.A.)  The brake assist system  Have the vehicle inspected by your Toyota dealer immediately. (Canada) Electric power steering system warning light (warning ■ buzzer) Warning light...
Page 625 (P.248) Stop & Start cancel indicator ■ Warning light Details/Actions Indicates a malfunction in the Stop & Start sys-  Have the vehicle inspected by your Toyota (Flashes) dealer immediately. (If equipped) Intuitive parking assist OFF indicator (warning buzzer) ■...
Page 626: Slip Indicator Light
Warning light Details/Actions When a buzzer sounds: Indicates a malfunction in the PKSB (Parking Support Brake) system  Have the vehicle inspected by your Toyota dealer immediately. When a buzzer does not sound: (Flashes) Indicates that the system is temporarily unavail-...
Page 627  Release the accelerator pedal and depress the brake pedal. Indicates a malfunction in the Brake Override System (with warning buzzer)  Have the vehicle inspected by your Toyota dealer immediately. Drive-Start Control Indicates that the shift position was changed and Drive-Start Control was operated while depressing the accelerator pedal.
Page 628: Low Fuel Level Warning Light
8-2. Steps to take in an emergency Parking brake indicator ■ Warning light Details/Actions It is possible that the parking brake is not fully engaged or released  Operate the parking brake switch once (U.S.A.) again. (Flashes) This light comes on when the parking brake is not released.
Page 629: Tire Pressure Warning Light
Details/Actions When the light comes on after blinking for 1 min- ute: Malfunction in the tire pressure warning system  Have the system checked by your Toyota dealer. When the light comes on: Low tire inflation pressure such as (If equipped) ...
Page 630 8-2. Steps to take in an emergency (front), side impact sensors (rear), the vehicle inspected by your Toyota driver’s seat position sensor, dealer immediately. driver’s seat belt buckle switch, front If the tire pressure warning light  passenger occupant classification comes on system (ECU and sensors), “AIR...
Page 631 Check the tires. If a tire is shown on the multi-informa- flat, change it with the spare tire and have the flat tire repaired by tion display the nearest Toyota dealer. Check and follow the message shown on the multi-information ● Avoid abrupt maneuvering and display.
Page 632 8-2. Steps to take in an emergency Your vehicle has also been WARNING equipped with a TPMS (tire pres- As an added safety feature, your sure warning system) malfunc- vehicle has been equipped with a tion indicator to indicate when the tire pressure monitoring system system is not operating properly.
Page 633: If A Warning Message Is Displayed
8-2. Steps to take in an emergency shown while the driving assist sys- If a warning message tems such as PCS (Pre-Collision is displayed system) or the dynamic radar cruise control with full-speed range is oper- The multi-information dis- ating. If a warning message is shown, be sure to decelerate the play shows warnings of sys- vehicle or follow an instruction...
Page 634 Replace” is displayed ■ If a message that indicates the The engine oil level may be low. need for visiting your Toyota Check the level of the engine oil, dealer is displayed and add engine oil if necessary. This The system or part shown on the...
Page 635 ● PCS (Pre-Collision System) Have the vehicle inspected by ● LTA (Lane Tracing Assist) your Toyota dealer. ● Automatic High Beam ● RSA (Road Sign Assist) ● Dynamic radar cruise control with...
Page 636: If You Have A Flat Tire
8-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P.573 WARNING ■ If you have a flat tire Do not continue driving with a flat tire.
Page 637 8-2. Steps to take in an emergency Location of the spare tire, jack and tools Jack Tool bag Jack handle Wheel nut wrench Towing eyelet (if equipped) Spare tire ● Only use the tire jack that WARNING comes with this vehicle for ■...
Page 638 8-2. Steps to take in an emergency Take out the jack. WARNING Do not touch the threaded portion ● Put the jack properly in its jack of the jack as it is greased. point. ● Do not put any part of your body under the vehicle while it is sup- ported by the jack.
Page 639 8-2. Steps to take in an emergency Loosen the center fastener Remove the wheel ornament that secures the spare tire. using the wrench. Vehicles with full wheel ornament: To protect the wheel ornament, place a rag between the wrench and the wheel ornament. WARNING ■...
Page 640 8-2. Steps to take in an emergency cate the jack point positions. scratching the wheel surface. Assemble the jack handle WARNING and the wheel nut wrench as ■ Replacing a flat tire shown in the illustration. ● Do not touch the disc wheels or the area around the brakes immediately after the vehicle has been driven.
Page 641 Toyota loose contact with the disc wheel dealer. seat • When installing the wheel nuts, be sure to install them with the tapered ends facing inward.
Page 642 8-2. Steps to take in an emergency ment with the valve stem as shown. wheel : The wheel ornament cannot be Lower the vehicle. installed on the compact spare tire. Stow the flat tire, tire jack and all tools. ■ The compact spare tire ●...
Page 643 8-2. Steps to take in an emergency Perform the following steps and fit WARNING tire chains to the front tires: Replace a rear tire with the com- ■ When using the compact pact spare tire. spare tire Replace the flat front tire with the ●...
Page 644 • Panoramic view monitor (if pact spare tire compared to when equipped) driving with standard tires. Be • Toyota parking assist monitor (if careful when driving over uneven equipped) road surfaces. • Intuitive parking assist (if ■...
Page 645: If The Engine Will Not Start645
(vehicles with smart key sys- dim, or the horn does not tem). sound or sounds at a low Contact your Toyota dealer if the volume problem cannot be repaired, or if repair procedures are unknown. One of the following may be the cause of the problem: ...
Page 646: If You Lose Your Keys
Emergency start function (vehicles with smart key system) New genuine keys can be made by your Toyota dealer When the engine does not start, using the other key and the the following steps can be used key number stamped on as an interim measure to start your key number plate.
Page 647: If The Electronic Key Does Not Operate Properly (Vehicles With Smart Key System)
(turn and hold) related problems Take your vehicle with all the elec- : If equipped tronic keys provided with your vehicle to your Toyota dealer. : These settings must be custom- ized at your Toyota dealer. Locking and unlocking the doors Use the mechanical key (P.107) in order to perform the...
Page 648 P and depress the brake ■ Alarm (if equipped) pedal. Using the mechanical key to lock Touch the Toyota emblem the doors will not set the alarm sys- side of the electronic key to tem. If a door is unlocked using the the engine switch.
Page 649: If The Vehicle Battery Is Discharged
8-2. Steps to take in an emergency by following the steps below. If the vehicle battery is discharged Vehicles with alarm: Confirm that the electronic key is being carried. The following procedures When connecting the jumper (or may be used to start the booster) cables, depending on the engine if the vehicle’s bat- situation, the alarm may activate...
Page 650 Information stored in the ECU is system: Maintain the engine cleared. When the battery is depleted, have the vehicle speed of the second vehicle inspected at your Toyota dealer. and start the engine of your ● Some systems may require initial- vehicle.
Page 651 8-2. Steps to take in an emergency sible to unlock the doors using the same as the previous one (LN3), 20 smart key system when the bat- hours rate capacity (20HR) is equiv- tery is discharged. Use the wire- alent (65Ah) or greater, and perfor- less remote control or the mance rating (CCA) is equivalent mechanical key to lock or unlock...
Page 652 ■ WARNING For information regarding battery ● Do not allow the other end of replacement, contact your Toyota the jumper cable connected to dealer. the “+” terminal to come into contact with any other parts or metal surfaces in the area, such NOTICE as brackets or unpainted metal.
Page 653: If Your Vehicle Overheats
(radi- ator) for any leaks. The following may indicate If a large amount of coolant leaks, that your vehicle is over- immediately contact your Toyota heating. dealer.  The needle of the engine coolant temperature gauge (P.82, 85) enters the red...
Page 654 When adding engine coolant Stop the engine immediately Add coolant slowly after the engine has cooled down suffi- and contact your Toyota ciently. Adding cool coolant to a dealer. hot engine too quickly can cause If the fan is operating: damage to the engine.
Page 655: If The Vehicle Becomes Stuck
8-2. Steps to take in an emergency If the vehicle becomes WARNING stuck ■ When attempting to free a stuck vehicle If you choose to push the vehicle Carry out the following pro- back and forth to free it, make cedures if the tires spin or sure the surrounding area is clear the vehicle becomes stuck...
Page 656 8-2. Steps to take in an emergency...
Page 657: Vehicle Specifications
Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.)....Fuel information ..Tire information ... 9-2. Customization Customizable features 9-3. Initialization Items to initialize ..
Page 658: Specifications Maintenance Data (Fuel, Oil Level, Etc.)
9-1. Specifications Maintenance data (fuel, oil level, etc.) 9-1.Specifications Dimensions and weights Except ADVEN- TURE grade (for the U.S.A.)/Trail 180.9 in. (4595 mm) grade (for Can- ada) Overall length ADVENTURE grade (for the U.S.A.)/Trail 181.5 in. (4611 mm) grade (for Can- ada) Except ADVEN- TURE grade (for...
Page 659: Vehicle Identification
The vehicle identification num- ber (VIN) is the legal identifier for your vehicle. This is the pri- mary identification number for your Toyota. It is used in regis- tering the ownership of your vehicle. This number is also on the Certi- fication Regulation Label.
Page 660: Lubrication System
Warm up and turn off the engine, wait more than 5 min- utes, and check the oil level on the dipstick. Engine oil selection used in your Toyota vehicle. Use ■ Toyota approved “Toyota Genu- “Toyota Genuine Motor Oil” is...
Page 661 9-1. Specifications ine Motor Oil” or equivalent to viscosity (one with a higher value) may be better suited if satisfy the following grade and viscosity. the vehicle is operated at high speeds, or under extreme Oil grade: load conditions. API SN/RC multigrade engine How to read oil container labels: Recommended viscosity: API registered marks is added...
Page 662: Cooling System
Do not use plain water alone. : The coolant capacity is the quantity of reference. If replacement is necessary, contact your Toyota dealer. Ignition system (spark plug) Make DENSO FC16HR-Q8 0.031 in. (0.8 mm) NOTICE ■...
Page 663 : The fluid capacity is the quantity of reference. If replacement is necessary, contact your Toyota dealer. NOTICE ■ Transmission fluid type Using transmission fluid other than “Toyota Genuine ATF WS” may ulti- mately damage the transmission of your vehicle. Transfer (AWD models) Dynamic Torque Control AWD 0.48 qt.
Page 664: Tires And Wheels
9-1. Specifications Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent of matching quality to satisfy the above specification. Please contact your Toyota dealer for further details.
Page 665 9-1. Specifications Vehicles with 17-inch wheels (type B)  225/65R17 102H, T165/80R17 104M Tire size (spare) Front: 36 psi (250 kPa, 2.5 kgf/cm or bar) Tire inflation pressure (Recom- Rear: mended cold tire inflation pres- 36 psi (250 kPa, 2.5 kgf/cm or bar) sure) Spare:...
Page 666 9-1. Specifications Vehicles with 17-inch wheels (type D)  225/65R17 102H, T165/80D17 104M Tire size (spare) Front: 35 psi (240 kPa, 2.4 kgf/cm or bar) Tire inflation pressure (Recom- Rear: mended cold tire inflation pres- 35 psi (240 kPa, 2.4 kgf/cm or bar) sure) Spare:...
Page 667 9-1. Specifications Vehicles with 19-inch wheels (type A)  235/55R19 101V, T165/90D18 107M Tire size (spare) Front: 33 psi (230 kPa, 2.3 kgf/cm or bar) Tire inflation pressure (Recom- Rear: mended cold tire inflation pres- 33 psi (230 kPa, 2.3 kgf/cm or bar) sure) Spare:...
Page 668 9-1. Specifications Light bulbs Light bulbs Bulb No. Type Front side marker lights  Fog lights Front turn signal/parking lights 7444NA 28/8 (bulb type) Exterior Rear turn signal lights WY21W Back-up lights W16W  Outer foot lights Vanity lights  Interior lights (front)/personal lights ...
Page 669: Fuel Information
Some gasoline contains an octane line. For more information on Top enhancing additive called MMT Tier Detergent Gasoline and a list (Methylcyclopentadienyl Manga- of marketers, please go to the offi- nese Tricarbonyl). cial website www.toptiergas.com. Toyota does not recommend the use...
Page 670 The malfunction indicator lamp on the instrument cluster may come on. If this happens, contact your Toyota dealer for service. ■ If your engine knocks ● Consult your Toyota dealer.
Page 671: Tire Information
9-1. Specifications Tire information Typical tire symbols Full-size tire  Compact spare tire  Tire size (P.673) DOT and Tire Identification Number (TIN) (P.672) Location of treadwear indicators (P.573) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
Page 672: Identification Number
9-1. Specifications Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL” is a bias-ply tire. TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly put into the tire. A tube type tire has a tube inside the tire and the tube maintains the air pres- sure.
Page 673 9-1. Specifications Type B (P = Passenger car,  T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 dig- DOT symbol its) Tire Identification Number...
Page 674: Uniform Tire Quality
Your Toyota dealer will help answer and concrete. any questions you may have as you read this information. A tire marked C may have poor DOT quality grades ■...
Page 675: Glossary Of Tire Terminology
9-1. Specifications Temperature A, B, C performance which all passenger ■ car tires must meet under the Fed- The temperature grades are A eral Motor Vehicle Safety Standard (the highest), B, and C, repre- No. 109. senting the tire’s resistance to Grades B and A represent higher the generation of heat and its levels of performance on the labo-...
Page 676 9-1. Specifications Tire related term Meaning The sum of: (a) Curb weight Maximum loaded vehicle (b) Accessory weight weight (c) Vehicle capacity weight (d) Production options weight 150 lb. (68 kg) times the number of occupants Normal occupant weight specified in the second column of Table 1 that follows Distribution of occupants in a vehicle as speci-...
Page 677 9-1. Specifications Tire related term Meaning The surface area of the rim not covered by the Weather side inflated tire The part of the tire that is made of steel wires, Bead wrapped or reinforced by ply cords and that is shaped to fit the rim A breakdown of the bond between components Bead separation...
Page 678 9-1. Specifications Tire related term Meaning (a)The sidewall that contains a whitewall, bears white lettering, or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same molding on the other Intended outboard side- sidewall of the tire, or wall (b)The outward facing sidewall of an asymmetri- cal tire that has a particular side that must...
Page 679 9-1. Specifications Tire related term Meaning A mechanical device made of rubber, chemi- cals, fabric and steel or other materials, that, Pneumatic tire when mounted on an automotive wheel, pro- vides the traction and contains the gas or fluid that sustains the load A pneumatic tire in which the ply cords that Radial ply tire extend to the beads are laid at substantially 90...
Page 680 9-1. Specifications Tire related term Meaning The projections within the principal grooves Treadwear indicators designed to give a visual indication of the (TWI) degrees of wear of the tread The fixture used to hold the wheel and tire Wheel-holding fixture assembly securely during testing : Table 1 ...
Page 681: Customization
Toyota ting screen. dealer. The method of performing detailed Some function settings are setting differs for each screen. changed simultaneously with Please refer to the advice sentence displayed on the screen.
Page 682 Customizable Features Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Vehicles with navigation system or multimedia system: Settings that can be changed using the navigation system or multimedia sys-...
Page 683 9-2. Customization Default Customized Function setting setting Drive information type Trip Total – – Average Drive information items (first Speed Distance – – item) Total Time Average Drive information items (sec- Speed Total Time – – ond item) Distance Pop-up display –...
Page 684 9-2. Customization Default Customized Function setting setting Shift position Driver’s door Automatic door unlocking linked door – linked door function unlocking unlocking operation operation Smart key system and wireless remote control (P.104, 129) ■ Default Customized Function setting setting Operation signal (emer- –...
Page 685 9-2. Customization to “Driver’s door”. Wireless remote control (P.104) ■ Default Customized Function setting setting Wireless remote control – – Driver’s door unlocked in All doors first step, all Unlocking operation unlocked in – doors first step unlocked in second step Theft deterrent panic mode –...
Page 686 9-2. Customization Default Customized Function setting setting 1 to 4 Opening angle – – User setting Power back door open oper- ation when the opener switch – – is pressed with the back door fully closed *1, 4 – Kick Sensor : If equipped : The operation buzzer that sounds when the back door begins to operate cannot be turned off.
Page 687 9-2. Customization Default Customized Function setting setting Wireless remote control linked operation signal – – (buzzer) Side windows open warning – – function Sliding roof open warning – – function : If equipped Turn signal lever (P.204) ■ Default Customized Function setting setting...
Page 688 9-2. Customization Default Customized Function setting setting Time elapsed before head- lights automatically turn off 30 seconds 60 seconds – after doors are closed 90 seconds Windshield wiper linked – – headlight illumination : If equipped Rear window wiper (P.219) ■...
Page 689 9-2. Customization Default Customized Function setting setting Vehicle sway warning sensi- Standard – – tivity High RSA (Road Sign Assist) (P.249) ■ Default Customized Function setting setting RSA (Road Sign Assist) – – No notification Excess speed notification Display only –...
Page 690 9-2. Customization BSM (Blind Spot Monitor) (P.262) ■ Default Customized Function setting setting BSM (Blind Spot Monitor) – – Outside rear view mirror indi- Bright – – cator brightness Early Late Alert timing for presence of approaching vehicle (sensi- Intermediate Only when –...
Page 691 9-2. Customization traffic alert) function. PKSB (Parking Support Brake) (P.279) ■ Default Customized Function setting setting PKSB (Parking Support – – Brake) function : If equipped Stop & Start system (P.347) ■ Default Customized Function setting setting Change the Stop & Start sys- tem duration when the A/C is Standard Extended...
Page 692 9-2. Customization Default Customized Function setting setting Operation when you approach the vehicle with the – – electronic key on your per- – – Footwell lighting : Vehicles with smart key system only : If equipped ■ Vehicle customization ● When the speed linked door locking function and shift position linked door locking function are both on, the door lock operates as follows.
Page 693: Initialization
• When rotating the tires Tire pressure warning sys- • When changing the tire P.579 • After registering the ID codes Toyota parking assist moni- • After reconnecting or chang- P.312 ing the battery P.344 • After changing a fuse...
Page 694 9-3. Initialization...
Page 695: For Owners
For owners 10-1.For owners Reporting safety defects for U.S. owners....Seat belt instructions for Canadian owners (in French)...... SRS airbag instructions for Canadian owners (in French)......
Page 696: 10-1.For Owners
National Highway Traffic other information about Safety Administration motor vehicle safety from (NHTSA) in addition to noti- http://www.safercar.gov. fying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800- 331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds...
Page 697: Seat Belt Instructions For Canadian Owners (In French)
10-1. For owners Seat belt instructions Entretien et soin for Canadian owners Manipulation des ceintures ■ (in French) de sécurité Avec un chiffon ou une éponge, The following is a French nettoyez à l’aide d’un savon explanation of seat belt doux et de l’eau tiède.
Page 698: Srs Airbag Instructions For Canadian Owners (In French)
10-1. For owners SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instruc- tions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English.
Page 699 10-1. For owners Coussins gonflables SRS latéraux et en rideau  Coussins gonflables SRS latéraux Peuvent aider à protéger le torse des occupants des sièges avant Coussins gonflables SRS en rideau • Peuvent aider à protéger principalement la tête des occupants des sièges latéraux •...
Page 700 10-1. For owners Contacteur de boucle de ceinture de sécurité du passager avant Capteurs d’impact latéral (arrière) Contacteur de boucle de ceinture de sécurité du conducteur Capteur de position du siège du conducteur Coussin gonflable du conducteur Système de classification de l’occupant du siège du passager avant (ECU et capteurs) Coussin gonflable de protection des genoux Lampe témoin SRS...
Page 701 10-1. For owners • Inclinez légèrement le dossier AVERTISSEMENT du siège. ■ Précautions relatives aux Bien que les véhicules soient coussins gonflables SRS conçus différemment, la plupart des conducteurs peuvent main- Observez les précautions suiva- tenir une distance de 10 in. ntes en ce qui concerne les cous- (250 mm), même si leur siège sins gonflables SRS.
Page 702 être correctement les coussins gonflables SRS retenu à l’aide d’un dispositif de avant considéreront que le con- retenue pour enfants. Toyota ducteur et le passager avant recommande vivement de portent tout de même leur cein- placer et d’attacher correcte- ture de sécurité...
Page 703 10-1. For owners Ne fixez et n’appuyez rien sur ● AVERTISSEMENT des zones telles que la planche ● Ne laissez pas un enfant se de bord, le tampon de volant ou tenir face au coussin gonflable encore la partie inférieure du SRS du passager avant ni tableau de bord.
Page 704 10-1. For owners N’utilisez pas d’accessoires ● AVERTISSEMENT recouvrant les parties du siège ● Véhicules non dotés du sys- où les coussins gonflables SRS tème Smart key : N’accrochez latéraux et le coussin gonflable pas d’objets lourds, pointus ou SRS du coussin de siège se durs, par exemple des clés ou déploient, car ces accessoires des accessoires, à...
Page 705 SRS Ne mettez pas votre véhicule au rebut et n’effectuez aucune des modifications suivantes sans d’abord consulter votre conces- sionnaire Toyota. Les coussins gonflables SRS pourraient fonctionner de manière incor- recte ou se déployer (gonfler) accidentellement, ce qui serait susceptible d’occasionner des...
Page 706 10-1. For owners...
Page 707: Index
Index What to do if... (Trouble- shooting) ....Alphabetical Index ..
Page 708: What To Do If
 Is the child-protector lock set? can be made by your Toyota The rear door cannot be dealer. (P.646) opened from inside the vehi- cle when the lock is set. Open ...
Page 709 What to do if... (Troubleshooting) switch while firmly depress- tem: ing the brake pedal? It is locked automatically to prevent theft of the vehicle. (P.196) (P.197)  Is the shift lever in P? (P.196) The windows do not open or close by operating the ...
Page 710 What to do if... (Troubleshooting) other types of warning buzzer with the spare tire. (P.636) may also sound. (P.622, 633) The vehicle becomes stuck An alarm is activated and horn sounds equipped)  Try the procedure for when  Did anyone inside the vehicle the vehicle becomes stuck in open a door during setting the mud, dirt, or snow.
Page 711: Alphabetical Index
Alphabetical Index Alphabetical Index SRS airbag instructions for Canadian owners ....698 A/C ........504, 509 SRS airbags ......33 Air conditioning filter.....589 SRS warning light ....623 Automatic air conditioning sys- Air conditioning filter .....589 tem ........509 Air conditioning system.504, 509 Eco air conditioning mode..510 Air conditioning filter .....589 Manual air conditioning system Automatic air conditioning sys-...
Page 712 Alphabetical Index Audio settings ......437 ® Bluetooth audio ....431 Common settings ....437 Registering/Connecting a Blue- Radio settings ......437 ® tooth device ......433 Audio source ......418 ® Bluetooth button (Setup Automatic air conditioning sys- screen)........382 tem.........509 ® Bluetooth details settings ...396 Air conditioning filter.....589 ®...
Page 713 Alphabetical Index Brake assist ......362 tions........166 Brake Hold ......208 Power window lock switch ..160 Break-in tips ......172 Power window precautions...159 Brightness control Rear door child-protectors ..113 Instrument panel light control84, Removed key battery precau- tions........596 BSM (Blind Spot Monitor)..262 Seat belt extender precautions Blind Spot Monitor function ..266 ..........30 Rear Cross Traffic Alert function...
Page 714 Alphabetical Index Deck board......526 Driver’s seat belt reminder light Defogger ..........628 Outside rear view mirrors ...505, Driver’s seat position memory ..........139 Rear window ....505, 512 Driving position memory ..139 Windshield....505, 512 Memory recall function ..140 Differential ......663 Drive-start control ....172 Digital Rear-view Mirror ..147 Driving Dimensions ......658...
Page 715 Alphabetical Index Electronic sunshade ....164 Overheating ......653 Jam protection function ..165 Tachometer.......82, 85 Operation ......164 Engine coolant Emergency, in case of Capacity .......662 If a warning buzzer sounds ..622 Checking ......568 If a warning light turns on ..622 Preparing and checking before If a warning message is dis- winter........369 played.........633...
Page 716 Alphabetical Index Fuel pump shut off system ...621 Gas station information ..728 Flat tire ........636 Information ......669 Tire pressure warning system Refueling ......221 ...........576 Type......660, 669 Floor mats .........26 Warning light......628 Fluid Fuel consumption information99 Automatic transmission ..663 Average fuel economy....91 Brake......569, 664 Current fuel consumption ..99 Washer .........572...
Page 717 Alphabetical Index Manual air conditioning system Power windows ....158 ...........504 Tire pressure warning system Outside rear view mirrors ...505, ...........579 Initial screen......383 Seat heaters......516 Caution screen .....383 High mounted stoplight Restarting the system...383 Replacing light bulbs ....599 Inside rear view mirror ...145, 147 Hill-start assist control ..363 Instrument panel light control84, HOME button ......386...
Page 718 Alphabetical Index Key number plate ....102 Lock steering column ....197 Keyless entry....104, 129 LTA (Lane Tracing Assist) ..238 Mechanical key ....107 Operation......238 Replacing the battery ...594 Warning messages....248 Warning buzzer ....129 Luggage compartment light 118, Wireless remote control key.104 Knee airbags......33 Wattage ........668 Luggage cover ......528 Lane Tracing Assist (LTA)..238...
Page 719 Alphabetical Index Vanity mirrors .......530 Mobile Assistant.....456 Navigation system-linked display Connectable devices and avail- ..........93 able functions .....456 Noise from under vehicle...8 Mobile Assistant operation ...456 Normal mode....353, 356 Moon roof Door lock linked moon roof oper- ation ........161 Jam protection function ..161 Odometer......82, 85 Operation ......161 Odometer and trip meter display...
Page 720 Alphabetical Index Checking the front and around Warning light......624 the vehicle ......321 Warning message..229, 635 Checking the rear and around Personal lights......520 the vehicle ......326 Switch ........520 Checking the sides of the vehicle Wattage ........668 ...........323 Phone........458 Customizing the panoramic view About the contacts in the contact monitor .......334 list ........462...
Page 721 Alphabetical Index Power outlets......530 Rear seat heaters....516 Power steering (Electric Power Rear side marker lights Steering system) ....363 Light switch......210 Warning light ......624 Replacing light bulbs ....599 POWER VOLUME knob..418 Rear turn signal lights Power windows Replacing light bulbs ....599 Door lock linked window opera- Turn signal lever ....204 tion ........159...
Page 722 Rain-sensing windshield wipers seat belt........30 ...........218 Pregnant women, proper seat RCTA ........265 belt use.........29 Toyota Safety Sense 2.0 ..224 Reminder light and buzzer .628, Service reminder message ..557 Setup button (Menu screen) 379, Seat belt extender ....30 Seat belt instructions for Cana- Setup screen ......382...
Page 723 Alphabetical Index Wattage ........668 Storage precautions....522 Side mirrors ......156 Stuck Adjustment ......156 If the vehicle becomes stuck 655 BSM (Blind Spot Monitor)..263 Suggestion function....98 Folding .........156 Sunglass holder......524 Heaters......505, 512 Sunshade ......161, 164 Side turn signal lights Sun visors .......530 Replacing light bulbs ....599 Switches Turn signal lever....204...
Page 724 Alphabetical Index ...........280 Tire inflation pressure Power back door opener switch Maintenance data ....664 ........... 119 Tire inflation pressure display Power door lock switch ..113 function.......576 Power window switch ...158 Warning light......629 RCTA........264 Tire information ......671 Rear window and outside rear Glossary .......675 view mirror defoggers switch Size ........673...
Page 725 Toyota Entune......488 In other situations ....486 Toyota Entune App Suite When making/receiving a call Entering keyword ....499 ...........485 Toyota Entune App Suite Con- When registering/connecting a nect........497 cellular phone .....484 Toyota Entune App Suite Con- ® When using the Bluetooth mes- nect settings ......501...
Page 726 Alphabetical Index Valet mode setting....416 RCTA OFF indicator .....626 Vehicle settings screen ..415 Seat belt reminder ..628, 629 Vehicle Stability Control (VSC) Vehicle sway warning ...243 ..........362 Warning lights Ventilators (seat ventilators) .516 ABS ........624 Voice button (Setup screen) 382, Brake hold operated indicator ...........627 Voice command system..450...
Page 727 · Navigation system Power windows ....158 · Audio system Window lock switch ....160 · Rear view monitor system Windows · Toyota parking assist monitor Power windows ....158 · Panoramic view monitor Rear window defogger .505, 512 Washer ......216, 219 Windshield defogger..505, 512 Windshield wiper de-icer ..515...
Page 728 GAS STATION INFORMATION Auxiliary catch lever (P.563) Back door opener switch (P.119) Fuel filler door (P.222) Hood lock release lever (P.563) Tire inflation pressure (P.664) : Vehicles with power back door Fuel tank capacity 14.5 gal. (55 L, 12.1 Imp.gal.) (Reference) Fuel type Unleaded gasoline only...

Toyota RAV 4 2019 Manual

Table of Contents

25 For Safety and Security 1

1-1. for Safe Use

Child Safety

Emergency Assistance

1-4. Theft Deterrent System

75 Vehicle Status Informa- 2

2 Vehicle Status Information

2-1. Instrument Cluster

101 Before Driving 3

Opening, Closing and Locking the Doors Side Doors

Adjusting the Steering Wheel and Mirrors Steering Wheel

Opening, Closing the Win- Dows and Moon Roof Power Windows

Key Information Keys

Adjusting the Seats

Adjusting the Steering

Opening, Closing the Win

169 Driving 4

Before Driving Driving the Vehicle

Driving Procedures

4-3. Operating the Lights and Wipers

Refueling

4-5. Using the Driving Support Systems

4-6. Driving Tips

375 Entune Audio 5

Free System for Cellular Phones)

Basic Function Buttons Overview

Basic Function

Basic Information before Operation

5-3. Connectivity Settings

Other Settings

Using the Audio/Visual System

5-6. Radio Operation

5-7. Media Operation

5-8. Audio/Visual Remote Controls

Audio Settings

Audio/Visual System

5-11.Voice Command System

5-12.Mobile Assistant Opera- Tion

5-14.Phone Settings

5-15.What to Do if

5-17.Toyota Entune Operation

5-18.Entune Settings

503 Interior Features 6

Using the Air Conditioning System and Defogger Manual Air Conditioning Sys- Tem

Using the Interior Lights

6-3. Using the Storage Features

6-4. Using the Other Interior Features

549 Maintenance and Care 7

Maintenance and Care Cleaning and Protecting the Vehicle Exterior

7-1. Maintenance and Care

7-2. Maintenance

Do-It-Yourself Maintenance

7-3. Do-It-Yourself Maintenance

611 When Trouble Arises 8

8-2. Steps to Take in an Emergency

9 Vehicle Specifications

Specifications Maintenance Data (Fuel, Oil Level, Etc.)

Customization

Initialization

10 For Owners

10-1.For Owners

Index

Quick Links

Chapters

Troubleshooting

Related Manuals for Toyota RAV 4 2019

Summary of Contents for Toyota RAV 4 2019