How To Initialize The Tire Pressure Warning System - Toyota Prius 2010 User Manual

■

How to initialize the tire pressure warning system

STEP 1
Park the vehicle in safe place and turn the "POWER" switch
OFF.
While the vehicle is moving, initialization is not performed.
STEP 2
Adjust the tire inflation pressure to the specified cold tire infla-
tion pressure level. (→P. 565)
Make sure to adjust the tire pressure to the specified cold tire
inflation pressure level. The tire pressure warning system will
operate based on this pressure level.
STEP 3
Turn the "POWER" switch to ON mode.
STEP 4
STEP 5
Wait for a few minutes with the ON mode, and then turn
"POWER" switch OFF.
4-3. Do-it-yourself maintenance
Push and hold the tire pressure
warning reset switch until the tire
pressure warning light blinks
slowly 3 times.
4
443