Installing Child Restraints Using A Seat Belt; Rear-Facing/Infant Seat/Convertible Seat - Toyota RAV 4 2015 Service Manual

66
1-1. For safe use
Installing child restraints using a seat belt (child restraint lock
function belt)
Rear-facing  Infant seat/convertible seat
■
Adjust the seatback to the
1
8th lock position from the
fully reclined position.
(P. 138)
Fully reclined position
1
8th lock position
2
If your child restraint system interferes with a head restraint and
cannot be installed properly, install the child restraint system after
removing the head restraint. (P. 146)
Place the child restraint sys-
2
tem on the rear seat facing
the rear of the vehicle.
Run the seat belt through the
3
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
RAV4_OM_OM42A78U_(U)
I n f o r ma t i o n P r o v i d e d b y :