Customizing The Startup And Screen Off Images; Transferring Images - Toyota RAV 4 2015 Service Manual

396
5-3. Using the audio system (Entune Audio)
Customizing the startup and screen off images (if equipped)
An image can be copied from a USB memory and used as the startup
and screen off Images.
When the engine switch is in the "ACC" or "ON" position (vehicles
without a smart key system) or ACCESSORY or IGNITION ON mode
(vehicles with a smart key system), the initial screen will be displayed.
When "Screen Off" on the "Setup" screen is selected, the screen is
turned off and the desired screen off image that is set is displayed.
(To turn the screen off: P. 394)

Transferring images

■
Open the cover and connect
1
a USB memory.
Turn on the power of the USB
memory if it is not turned on.
Press the "MENU" button.
2
Select "Setup".
3
Select "General".
4
Select "Customize Startup Image" or "Customize Screen Off
5
Image".
Select "Transfer".
6
Select "Yes".
7
● When saving the images to a USB, name the folder that the star-
tup image is saved to "StartupImage" and name the folder that
the screen off image is saved to "DisplayOffImage". If these
folder names are not used, the audio system cannot download
the images. (The folder names are case sensitive.)
● The compatible file extensions are JPG and JPEG.
● Image files of 5 MB or less can be transferred.
● Up to 3 images can be transferred to the audio system.
RAV4_OM_OM42A78U_(U)
I n f o r ma t i o n P r o v i d e d b y :