Voice Command System; Using The Voice Command System - Toyota RAV 4 2015 Service Manual

Voice command system

The voice command system enables the hands-free system to
be operated using voice commands.

Using the voice command system

Press the talk switch.
1
To cancel the voice command sys-
tem, press and hold the talk switch.
After a beep sounds, say the desired command.
2
On the list screen, you can select the desired command.
Microphone
■
P. 443
When using the microphone
■
It is unnecessary to speak directly into the microphone when giving a com-
●
mand.
Voice commands may not be recognized if:
●
• They are spoken too quickly.
• They are spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while voice commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned towards the microphone.
In the following conditions, the system may not recognize the command
●
properly and using voice commands may not be possible:
• The command is incorrect or unclear. Note that certain words, accents or
speech patterns may be difficult for the system to recognize.
• There is excessive background noise, such as wind noise.
RAV4_OM_OM42A78U_(U)
5-3. Using the audio system (Entune Audio)
I n f o r ma t i o n P r o v i d e d b y :
483
5