282
4-5. Using the driving support systems
The Blind Spot Monitor function is operational when
■
The BSM main switch is set to on
●
Vehicle speed is greater than approximately 10 mph (16 km/h).
●
The Blind Spot Monitor function will detect a vehicle when
■
A vehicle in an adjacent lane overtakes your vehicle.
●
●
Another vehicle enters the detection area when it changes lanes.
Conditions under which the Blind Spot Monitor function will not detect a
■
vehicle
The Blind Spot Monitor function is not designed to detect the following types
of vehicles and/or objects:
Small motorcycles, bicycles, pedestrians, etc.
●
●
Vehicles traveling in the opposite direction
Guardrails, walls, signs, parked vehicles and similar stationary objects
●
Following vehicles that are in the same lane
●
Vehicles driving 2 lanes across from your vehicle
●
*
: Depending on conditions, detection of a vehicle and/or object may occur.
RAV4_OM_OM42A78U_(U)
*
*
*
I n f o r ma t i o n P r o v i d e d b y :
*