Temporarily Lowering Sensor Sensitivity; And Wipers - Toyota RAV 4 2015 Service Manual

226
4-3. Operating the lights and wipers

Temporarily lowering sensor sensitivity

■
The sensitivity of the sensor can be temporarily lowered.
Vehicles without a smart key system: Turn the engine switch to the
1
"LOCK" position while the following conditions are met.
Vehicles with a smart key system: Turn the engine switch off while the fol-
lowing conditions are met.
• The headlight switch is in
• The headlight switch lever is in high beam position.
Vehicles without a smart key system: Turn the engine switch to the "ON"
2
position.
Vehicles with a smart key system: Turn the engine switch to IGNITION
ON mode.
Within 5 seconds after
3
original position then pushing it to the high beam position quickly 9 times,
then leave the lever in high beam position.
Automatic High Beam (headlights) may turn on even the vehicle is stopped.
If the Automatic High Beam indicator turns to yellow...
■
It may indicate a malfunction in the system. Contact your Toyota dealer.
Customization
■
The Automatic High Beam can be turned off.
(Customizable features: P. 687)
CAUTION
Limitations of the Automatic High Beam
■
Do not rely on the Automatic High Beam. Always drive safely, taking care to
observe your surroundings and turning high beam on or off manually if nec-
essary.
RAV4_OM_OM42A78U_(U)
.
, repeat pulling the headlight switch lever to the
2
I n f o r ma t i o n P r o v i d e d b y :