Repair and replacement
■
It is recommended that genuine Toyota parts be used for repairs to ensure
performance of each system. If non-Toyota parts are used in replacement or if
a repair shop other than a Toyota dealer performs repairs, confirm the war-
ranty coverage.
Resetting the maintenance required reminder light (U.S.A. only)
■
After the required maintenance is performed according to the maintenance
schedule, please reset the reminder light.
To reset the data, follow the procedure described below:
Vehicles without a smart key system
Switch the display to the trip meter A (P. 88) and then turn the engine
1
switch to the "LOCK" position.
While pressing the "DISP" button (P. 88), turn the engine switch to the
2
"ON" position (do not start the engine because reset mode will be can-
celed).
Continue to press and hold the button until the trip meter displays "000000".
3
Vehicles with a smart key system
Switch the display to the trip meter A (P. 88) and then turn the engine
1
switch off.
While pressing the "DISP" button (P. 88), turn the engine switch to IGNI-
2
TION ON mode (do not start the engine because reset mode will be can-
celed).
Continue to press and hold the button until the trip meter displays "000000".
3
Allow inspection and repairs to be performed by a Toyota dealer
■
Toyota technicians are well-trained specialists and are kept up to date with
●
the latest service information. They are well informed about the operations
of all systems on your vehicle.
Keep a copy of the repair order. It proves that the maintenance that has
●
been performed is under warranty coverage. If any problem should arise
while your vehicle is under warranty, your Toyota dealer will promptly take
care of it.
RAV4_OM_OM42A78U_(U)
6-2. Maintenance
I n f o r ma t i o n P r o v i d e d b y :
521
6