Panasonic WV-SW598 Operating Instructions Manual page 64

10 Configure the basic settings of the camera [Basic]
[Image saving interval/Number of images to be saved(Post alarm)] - [Image saving interval]
When "Alarm input" or "Manual" is selected for "Save trigger", select an interval (frame rate) of saving images
on the SD memory card from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
•
Default: 1fps
Note
•
When "1920x1080" is selected for the image capture size of the JPEG images to be saved, "1fps"
cannot be selected.
[Image saving interval/Number of images to be saved(Post alarm)] - [Number of images to be
saved]
Select a number of alarm images to be saved on the SD memory card from the following.
10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/ 300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
•
Default: 100pics
Note
•
When "H.264(1)" or "H.264(2)" is selected for "Recording format", "Pre alarm" and "Post alarm" can be
set on "H.264 recording" of [Alarm] tab.
•
"Number of images to be saved" can be configured only when "Alarm input" is selected for "Save
trigger".
[Image capture size]
When "Manual" is selected for "Save trigger" and "JPEG" is selected for "Recording format", select the image
capture size of the images to be saved on the SD memory card from the following.
When "2 mega pixel [16:9]" is selected for "Image capture mode"
1920x1080/640x360/320x180
When "1.3 mega pixel [16:9]" is selected for "Image capture mode"
1280x720/640x360/320x180
When "1.3 mega pixel [4:3]" is selected for "Image capture mode"
1280x960/VGA/QVGA
•
Default: 640x360
Note
•
When "FTP error" is selected for "Save trigger", images will be saved with the image capture size
selected on the [FTP img. trans.] tab of the "Network" page.
•
When "H.264(1)" or "H.264(2)" is selected for "Recording format", select the image capture size for "H.
264 recording" - "Image capture size" on the [SD memory card] tab.
•
When "Alarm input" is selected for "Save trigger", images will be saved with the image capture size
selected on the [Alarm] tab of the "Alarm" page.
H.264 recording
This setting is available only when "H.264(1)" or "H.264(2)" is selected for "Recording format" of the SD memory
card.
When the [Set] button is clicked after selecting "H.264(1)" or "H.264(2)" in "Recording format", "H.264
recording" is displayed on the lower part of the screen.
[Image capture size]
Select the image capture size from the following.
When "2 mega pixel [16:9]" is selected for "Image capture mode"
–
H.264(1): 1920x1080/640x360/320x180
–
H.264(2): 640x360/320x180
64 Operating Instructions