Configuration Of The Settings Relating To The E-Mail Notification [Notification] - Panasonic WV-SW598 Operating Instructions Manual

13.9 Configuration of the settings relating to the
E-mail notification [Notification]
Click the [Notification] tab on the "Alarm" page. (®page 47, page 49)
The settings relating to the alarm E-mail can be configured. It is necessary to configure the settings of the
E-mail server to perform the E-mail notification. (®page 156)
E-mail notification
[E-mail server >>]
When "E-mail server >>" is clicked, the [E-mail] tab of the "Server" page will be displayed. (®page 156)
[E-mail notification]
Select "On" or "Off" to determine whether or not to provide notification by E-mail according to the settings for
the "Alarm" and "Diag." checkboxes of "Destination of notification" below.
–
When an alarm is detected ("Alarm")
–
When a notification of the remaining capacity of the SD memory card has been provided ("Diag.")
–
When the SD memory card has become full ("Diag.")
–
When the SD memory card cannot be recognized ("Diag.")
•
Default: Off
[Alarm image attachment]
Select "On" or "Off" to determine whether or not to attach an image to the E-mail to be sent when an alarm is
detected.
•
Default: Off
Note
•
The settings for "Image capture size" of the "Alarm image" section on the [Alarm] tab (®page 134) will
be applied to the size of the image to be attached.
13 Configure the alarm settings [Alarm]
Operating Instructions 145