Panasonic WV-SW598 Operating Instructions Manual page 102

11 Configure the settings relating to images and audio [Image/Audio]
•
Default: High
[Stabilizer]
Select "On" or "Off" to determine whether or not to activate the image stabilizer.
•
Default: Off
IMPORTANT
•
If "On" is selected for the image stabilizer, the view angle will become narrower and the resolution
becomes lower. When "On" is selected, check the view angle and resolution at camera installation.
The image stabilizer function may not work for the following photographic subjects:
–
Dark subject
–
Less contrast subject (e.g. white wall)
–
Short cycled image shaking such as mechanical vibration
–
Large amplitude image shaking
•
Image stabilization may not be effective in the following case.
–
When a parameter other than "Off(1/30s)" is selected for "Auto slow shutter"
•
If "On" is selected for the image stabilizer, depending on the subject being viewed, images may shake
slightly due to false detections even when the subject is still.
[Chroma gain level]
Adjusts the chroma level (color density).
When the cursor is moved in the "+" direction, the colors will become thicker. When the cursor is moved in the
"-" direction, the colors will be thinner. Click the [Reset] button to reset the setting to the default.
•
Default: 128
[Aperture level]
Adjust the aperture level (outline compensation).
Images will be sharper when the cursor is moved in the "+" direction, and will be softer when the cursor is
moved in the "-" direction. Click the [Reset] button to reset the setting to the default.
•
Default: 15
[Pedestal level]
Adjust the black level of images by moving the cursor.
When the cursor is moved to the "+" direction, images will become brighter. When the cursor is moved to the
"-" direction, images will be darker. Click the [Reset] button to reset the setting to the default.
•
Default: 128
[Fog compensation]
Select "On" or "Off" to determine whether or not to activate the fog compensation function. When "On" is
selected for "Super Dynamic(SD)" or "Adaptive black stretch", this setting is not available.
The fog compensation function can make dim images that have been affected by fog or other conditions clearer
using digital image processing.
•
On: Activates the fog compensation function.
•
Off: Stops the fog compensation function.
•
Default: Off
[Level]
Adjust the fog compensation level.
The level of fog compensation will increase when the cursor is moved in the "+" direction, and decrease when
the cursor is moved in the "-" direction. Click the [Reset] button to reset to the default setting.
Default: 64
102 Operating Instructions