Panasonic WV-SW598 Operating Instructions Manual page 13

•
button: Images become darker.
•
button: The adjusted brightness will return to the default brightness (64).
•
button: Images become brighter.
[Preset]
*2
Select a preset position from the pull-down menu and click the [Go] button. The camera will move to the
selected preset position (®page 106). "H" next to the preset position number indicates the home position.
When "Home position" is selected, the camera will move to the home position. (®page 91)
When "Preset ID" is registered for a preset position, the registered preset ID will be displayed next to the
preset position number.
Camera title
The camera title entered for "Camera title" on the [Basic] tab will be displayed. (®page 53)
Alarm occurrence indication button
This button will be displayed and will blink when an alarm has occurred. When this button is clicked, the
alarm output terminal will be reset and this button will disappear. (®page 30)
Full screen button
Images will be displayed on a full screen. To return to the "Live" page, press the [Esc] key. The aspect ratio
of displayed images will be adjusted in accordance with the monitor.
Snap shot button
Click this button to take a picture (a still picture). The picture will be displayed on a newly opened window.
When right-clicking on the displayed image, the pop-up menu will be displayed. It is possible to save the
image on the PC by selecting "Save" from the displayed pop-up menu.
When "Print" is selected, printer output is enabled.
Note
•
For the case of using Windows 8, Windows 7 or Windows Vista, the following settings may be
required.
Open Internet Explorer, click [Tools] ® [Internet Options] ® [Security] ® [Trusted Sites] ®
[Sites]. Register the camera address on [Website] of the displayed trusted widows.
Mic input button
*3
Turns on/off the audio reception (hear audio from the camera on a PC). This button will be displayed only
when "Mic input", "Interactive(Full-duplex)" or "Interactive(Half-duplex)" is selected for "Audio transmission/
reception" on the setup menu. (®page 125)
When this button is clicked, the button will turn into the
heard on the PC.
Audio volume can be adjusted (Low/ Middle/ High) by moving the volume cursor
Note
•
The volume cursor is not displayed when "Audio recording" or "Audio detection" is used.
Audio output button
*3
Turns on/off the audio transmission (play audio from the PC on the unit speaker). This button will be
displayed only when "Audio output", "Interactive(Full-duplex)" or "Interactive(Half-duplex)" is selected for
"Audio transmission/reception" on the setup menu. (®page 125)
The button will blink during the audio transmission.
When this button is clicked, the button will turn into the
Audio output volume can be adjusted (Low/Middle/High) by moving the volume cursor
Note
•
When a user is using the audio transmission function with "Interactive(Half-duplex)" selected, the
receiver button and the transmission button will be inoperable for the other users. When
"Interactive(Full-duplex)" is selected, the transmission button is inoperable for other users.
*2
button and audio from the camera will not be
button and audio from the PC will not be heard.
1 Monitor images on a PC
.
.
Operating Instructions 13