Panasonic WV-SC588 Installation Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Security Camera
  5. WV-SC588
  6. Installation manual
Panasonic WV-SC588 Installation Manual

Panasonic WV-SC588 Installation Manual

Hide thumbs Also See for WV-SC588:
Table of Contents

Advertisement

Quick Links

Installation Guide

Included Installation Instructions

Network Camera

WV-SC588
Model No.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
PGQX1225ZA
Cs0513-0
Printed in China

Advertisement

Table of Contents
loading

Related Manuals for Panasonic WV-SC588

Summary of Contents for Panasonic WV-SC588

  • Page 1: Installation Guide

    Installation Guide Included Installation Instructions Network Camera WV-SC588 Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
  • Page 2 For U.S. and Canada (UL Listed model): You should note the model number and serial number WV-SC588 of this unit in the space provided and retain this book as For Europe and other countries:...

  • Page 3: Table Of Contents

    Contents Important safety instructions ............................. 4 Limitation of liability ................................5 Disclaimer of warranty ............................... 5 Preface ....................................5 Main functions ................................... 6 About the user manuals ..............................6 System requirements for a PC ............................7 Trademarks and registered trademarks..........................8 Copyright ...................................

  • Page 4: Important Safety Instructions

    Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  • Page 5: Limitation Of Liability

    THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW: (1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;...

  • Page 6: Main Functions

    * The accuracy with the auto tracking function depends on the installation location. Make sure that the installation location is appropriate in advance. About the user manuals There are 2 sets of operating instructions for the WV-SC588 as follows. • Installation Guide: Explains how to install and connect devices, as well as how to connect and configure the network. • Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how to operate this camera.

  • Page 7: System Requirements For A Pc

    / Internet Explorer ® versions”. • If using Microsoft Windows XP, screen tearing* may occur when the shooting scene drastically changes (for example, while shooting fast-moving subjects or while controlling panning/tilting) due to the GDI restrictions of the OS. * A phenomenon in which portions of the screen are displayed out of alignment • For information on the operation verification of the supported operating systems and web browsers, refer to our web- site at http://security.panasonic.com/pss/security/support/index.html.

  • Page 8: Trademarks And Registered Trademarks

    Trademarks and registered trademarks • Microsoft, Windows, Windows Vista, Internet Explorer, and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. • Intel and Intel Core are trademarks of Intel Corporation in the U.S. and other countries. • Adobe, Acrobat Reader, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • SDXC Logo is a trademark of SD-3C, LLC. • iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. • Android is a trademark of Google Inc. • All other trademarks identified herein are the property of their respective owners. Copyright Distributing, copying, disassembling, reverse compiling and reverse engineering of the software provided with this product are all expressly prohibited.

  • Page 9: Precautions

    Precautions Refer installation work to the dealer. The exclusively designed mount bracket shall be Installation work requires technique and experience. used. Failure to observe this may cause a drop resulting in injury Failure to observe this may cause fire, electric shock, injury, or damage to the product.
  • Page 10 Do not damage the power cable. Cleaning this product body Do not damage, fabricate, twist, stretch, bundle, or forci- Be sure to turn off the power before cleaning. Failure to bly bend the power cable. Do not place heavy objects on observe this may cause injury.
  • Page 11 Periodically images on the screen appear to be dis- Position refresh torted During the use for a long period of time, the preset posi- When the camera is installed in a location where it is sub- tions may become inaccurate. When “Position refresh” is ject to small vibrations (for example, when it is installed set for the created schedule, the camera position will be near devices that vibrate), images may appear distorted...

  • Page 12: Precautions For Installation

    Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. This camera is designed to be used indoors. Mounting method for this product This product is designed to be used as a pendant mount This product is not operable outdoors.
  • Page 13 Check before installation Compatibility of devices is restricted. Before installation, check the ratings and dimensions of the devices to be used. Contact your dealer for details. Time & date setting It is necessary to set the time & date before putting this product into operation.

  • Page 14: Major Operating Controls

    Major operating controls Camera mount bracket (accessory) Safety wire (fixed with the mount bracket) Decorative cover - upper part (accessory) Decorative cover - lower part (accessory) <Front view> SD memory card slot SD memory card slot cover Live indicator INITIAL SET button Fixed section Unit Dome section...

  • Page 15: Rear View

    <Rear view> 12 V DC power supply terminal Access indicator (blinks when accessing) External I/O terminals Monitor out connector Link indicator for adjustment (lit when linking) Network connector Safety wire holder Audio output connector Microphone/line input connector • Monitor out connector for adjustment The video output is set to NTSC in the default settings of the camera.

  • Page 16: Insert/Remove An Sd Memory Card

    Insert/remove an SD memory card How to insert an SD memory card IMPORTANT: • When inserting an SD memory card, make sure the direction. Step 1 Slide the SD memory card slot cover to the right to SD memory card slot cover expose the slot. Step 2 Insert an SD memory card fully into the SD memory card slot, and then push the memory card straight into the slot until a click is heard.

  • Page 17: Installations/Connections

    Installations/Connections Caution: • A READILY ACCESSIBLE DISCONNECT DEVICE SHALL BE INCORPORATED TO THE EQUIPMENT POWERED BY 12 V DC POWER SUPPLY. • FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1). Before installation, prepare the following There are 4 methods to install the camera to a ceiling or wall as described below. Prepare the required devices and cables for each installation method before starting the installation.
  • Page 18 Examples of when using the optional brackets to install the camera Ceiling mount bracket Ceiling embedding bracket Wall mount bracket WV-Q105 WV-Q126A WV-Q119 IMPORTANT: • Before starting the installation/connection, prepare the required devices and cables. Before starting the connection, turn off the power of the devices including the camera and the PC or disconnect from the 12 V DC power supply. • Remove the cover film from the lens after the installation is complete.
  • Page 19 Installing the camera on a ceiling The following are descriptions of how to install the camera on a ceiling using the camera mount bracket (accessory). There are 2 methods; wiring through a hole in the ceiling (☞ page 19) and wiring through a cable guide (unnecessary to make a hole in the ceiling) (☞...
  • Page 20 • ALARM OUT, AUX OUT Step 6 Output specification: Open collector output Connect cables to the External I/O terminals, microphone/ (maximum applied voltage: 20 V DC) line input connector, audio output connector and the Open: 4 V - 5 V DC by internal pull-up monitor out connector for adjustment.
  • Page 21 Step 7 Step 9 Mount the camera onto the camera mount bracket Connect a LAN cable and power cable to the camera. (accessory). Fit the lock plate of the camera onto the <When using a PoE device> guide part of the camera mount bracket, and rotate the Connect a LAN cable to the camera.
  • Page 22 • 12 V DC power supply terminal Step 10 q Loosen the screw of the power cable plug (accesso- After completing the cable connections, attach the upper ry). and lower parts of the decorative cover (accessory). w Connect the output cable to the power cable plug. Strip 3 mm to 7 mm {1/8 inches to 9/32 inches} from q Match the “❘”...
  • Page 23 Wire without making a hole in the r Turn the decorative cover a further 16 ° in the direc- tion of the arrow (clockwise) as illustrated to secure ceiling the cover. t Make sure that all of the end part of the locking arm has come out from the hole in the decorative cover.

  • Page 24: Connection Example

    Connection example When connecting with a PC directly Powered speaker LAN cable Microphone (category 5 or better, cross) Power supply (12 V DC) Recommended total extended cable length* <Required cable> Recommended cable length from the speaker: less than 10 m {32.8 feet} LAN cable (category 5 or better, cross) Recommended cable length from the microphone: less than 1 m {3.28 feet} When connecting to a network using a PoE hub...

  • Page 25: Detach The Camera

    Detach the camera The camera is fixed on the camera mount bracket using the fixing screw. Remove the camera by following the instructions below. IMPORTANT: • Do not detach the camera in a different way from the one described below. It may damage the camera. Step 1 Step 3 Remove the fixing screw (M3, accessory) that is fixing the Detach the decorative cover from the camera by following camera on the camera mount bracket (accessory).

  • Page 26: Configure The Network Settings

    • T he License Agreement will be displayed. Read the Agreement and choose “I accept the term in the license agreement”, and click [OK]. • T he launcher window will be displayed. If the launcher window is not displayed, double click the “CDLauncher. exe” file on the CD-ROM. Note: • R efer to “Using the CD-ROM” in the Operating Instructions on the provided CD-ROM for further information about CDLauncher. Click the [Run] button next to [IP Setting Software]. [Panasonic IP Setting] screen will be displayed. Click the [Network Settings] button after selecting the MAC address/IP address of the camera to be configured. Select the camera you want to configure, and click [Access Camera]. Note: • When cameras are displayed in [Panasonic IP Setting] screen, click the camera with same MAC address as the MAC address printed on the camera that you want to configure.
  • Page 27 Password: 12345 • W hen changing settings related to the network settings, such as connection mode, IP address, and subnet mask, click the [Network Settings] button in [Panasonic IP Setting] screen as shown in step 3, then change each setting. • Due to security enhancements in “IP Setting Software”, “Network settings” of the camera to be configured cannot be changed when around 20 minutes have passed after turning on the power of the camera. (When the effective period is set to “20 min”...

  • Page 28: Troubleshooting

    Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Reference Symptom Cause/solution pages When using DC power supply...
  • Page 29 Or install the software to format the SD memory card on the PC. Live indicator lights red. (included in Refer to our website the CD-ROM) (http://security.panasonic.com/pss/security/support/info.html) for further information about the supported software. • Isn't the inserted SD memory card faulty? Replace the card with a normal one. • Check the following.
  • Page 30 About the live indicator The live indicator will light or blink as follows depending on the camera status. Operation status Indicator status When the power is turned on Before the network Lights orange → Lights off → Blinks orange connection is established →...

  • Page 31: Specifications

    Specifications Basic • Power source: 12 V DC±10 %, PoE (IEEE802.3af compliant) Power consumption: DC power supply: 12 V DC/ 1.0 A/ 12 W PoE device: 48 V DC/ 250 mA/ Approx. 12 W (Class 0 device) * FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1).
  • Page 32 Adaptive black stretch: On/ Off Back light compensation (BLC): On/ Off Fog compensation: On/ Off Light control mode setting: Outdoor scene/ Indoor scene (50 Hz)/ Indoor scene (60 Hz)/ Fix shutter Shutter speed: Off (1/30), 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 Auto slow shutter: Off (1/30 s), max.
  • Page 33 Up to 16 camera images can be displayed simultaneously on a multi-screen. (Including the camera itself) Compatible SDXC/SDHC/ Manufactured by Panasonic (SD speed class 4 or higher) SD memory card: SDXC memory card: 64 GB SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB...

  • Page 34: Standard Accessories

    Standard accessories Installation Guide (this document) ........1 pc. Warranty card ..............1 set CD-ROM* ...............1 pc. Code label* ..............1 pc. *1 The CD-ROM contains the operating instructions and different kinds of tool software programs. *2 This label may be required for network management. The network administrator shall retain the code label. The following parts are used during installation procedures.
  • Page 40 Unit of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Panasonic System Networks Co., Ltd. Three Panasonic Way, Secaucus, New Jersey 07094 U.S.A. Fukuoka, Japan Panasonic Canada Inc. Authorised Representative in EU: 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada...

Table of Contents