Toyota 4runner 2010 Instruction Manual page 628

6-1. Specifications
Tire related term
Extra load tire
Groove
Innerliner
Innerliner separation
Intended outboard
sidewall
Light truck (LT) tire
Load rating
Maximum load rating
Maximum permissible
inflation pressure
Measuring rim
Open splice
Outer diameter
634
A tire designed to operate at higher loads and
at higher inflation pressures than the corre-
sponding standard tire
The space between two adjacent tread ribs
The layer(s) forming the inside surface of a
tubeless tire that contains the inflating medium
within the tire
The parting of the innerliner from cord material
in the carcass
(a)The sidewall that contains a whitewall, bears
white lettering, or bears manufacturer, brand,
and/or model name molding that is higher or
deeper than the same molding on the other
sidewall of the tire, or
(b)The outward facing sidewall of an asymmet-
rical tire that has a particular side that must
always face outward when mounted on a vehi-
cle
A tire designated by its manufacturer as prima-
rily intended for use on lightweight trucks or
multipurpose passenger vehicles
The maximum load that a tire is rated to carry
for a given inflation pressure
The load rating for a tire at the maximum per-
missible inflation pressure for that tire
The maximum cold inflation pressure to which
a tire may be inflated
The rim on which a tire is fitted for physical
dimension requirements
Any parting at any junction of tread, sidewall, or
innerliner that extends to cord material
The overall diameter of an inflated new tire
Meaning