Turn Signal Lever - Toyota 4runner 2010 Instruction Manual

2-1. Driving procedures

Turn signal lever

The turn signal lever can be used to show the following intentions
of the driver:
Turn signals can be operated when
■
Vehicles without a smart key system: The engine switch is in the "ON" posi-
tion.
Vehicles with a smart key system: The "ENGINE START STOP" switch is in
IGNITION ON mode.
If the indicator flashes faster than usual
■
Check that a light bulb in the front or rear turn signal lights has not burned
out.
Right turn
Left turn
Lane change to the right
(push and hold the lever
partway)
The right hand signals will
flash until you release the
lever.
Lane change to the left
(push and hold the lever
partway)
The left hand signals will flash
until you release the lever.
CTH21AS028
2
179