Toyota 4runner 2010 Instruction Manual page 553

5-1. Essential information
Using a flatbed truck
Before emergency towing
■
STEP 1 Vehicles without a smart key system: Turn the engine switch to the
"ACC" (engine off) or "ON" position.
Vehicles with a smart key system: Turn the "ENGINE START
STOP" switch to ACCESSORY (engine off) or IGNITION ON mode
(engine running).
STEP 2 Part-time 4WD models: Shift the front-wheel drive control lever to
H2.
Full-time 4WD models: Put the four-wheel drive control switch in
H4F. (The center differential is unlocked.)
STEP 3
Shift the shift lever to N.
STEP 4 Release the parking brake.
558
If you use chains or cables to tie
down your vehicle, the angles
shaded in black must be 45°.
Do not overly tighten the tie
downs or the vehicle may be
damaged.