Toyota 4runner 2010 Instruction Manual page 145

1-7. Safety information
STEP 4
If the child restraint has a top tether strap, the top tether strap
STEP 5
should be latched onto the top tether strap anchor. (→P. 147)
Booster seat
■
STEP 1
STEP 2
146
While pushing the child restraint
system into the rear seat, allow
the shoulder belt to retract until
the child restraint system is
securely in place.
After
retracted to a point where there is
no slack in the belt, pull the belt to
CTH17AS045
check that it cannot be extended.
Place the child restraint system
on the seat facing the front of the
vehicle.
CTH17AS046
Sit the child in the child restraint
system. Fit the seat belt to the
child restraint system according
to the manufacturer's instruc-
tions and insert the plate into the
buckle. Make sure that the belt is
not twisted.
CTH17AS047
Check that the shoulder belt is
correctly
child's shoulder and that the lap
belt is as low as possible.
(→P. 79)
the shoulder belt
positioned over
has
the