Toyota 4runner 2010 Instruction Manual page 580

Hide thumbs Also See for 4runner 2010:

Table of Contents

Installing the spare tire

Install the spare tire and loosely tighten each wheel nut by

hand by approximately the same amount.

Disc wheel seat

5-2. Steps to take in an emergency

Remove any dirt or foreign mat-

ter from the wheel contact sur-

If foreign matter is on the wheel

contact surface, the wheel nuts

may loosen while the vehicle is

in motion, causing the tire to

When replacing an aluminum

wheel with a steel wheel, tighten

the wheel nuts until the tapered

portion comes into loose contact

with the disc wheel seat.

When replacing an aluminum

wheel with an aluminum wheel,

tighten the wheel nuts until the

washers comes into contact with

the disc wheel.

Show Quick Links

Table of Contents