Toyota 4runner 2010 Instruction Manual page 461

Hide thumbs Also See for 4runner 2010:

Table of Contents

Programming a rolling code system (for U.S. owners)

If your device is rolling code equipped, follow the steps under the

heading "Programming HomeLink

steps listed below.

Locate the learn button on the ceiling mounted garage door

opener motor. The exact location and color of the button may

vary by brand of garage door opener.

Refer to the operation manual supplied with the garage door opener

for the location of the learn button.

Press the learn button.

Following this step, you have 30 seconds in which to initiate step 3

Press and release the vehicle's programmed HomeLink

ton twice. The garage door may open.

If the garage door opens, the programming process is complete. If

the door does not open, press and release the button a third time.

This third press and release will complete the programming process

by opening the garage door.

The ceiling mounted garage door opener motor should now recog-

nize the HomeLink

Repeat the steps above to program another rolling code sys-

tem for any of the remaining HomeLink

" before proceeding with the

signal and operate the garage door.

3-7. Other interior features

Show Quick Links

Table of Contents