Engine (Ignition) Switch (Vehicles With A Smart Key System) - Toyota 4runner 2010 Instruction Manual

2-1. Driving procedures

Engine (ignition) switch (vehicles with a smart key system)

Performing the following operations when carrying the electronic
key on your person starts the engine or changes "ENGINE START
STOP" switch modes.
Starting the engine
■
Check that the parking brake is set.
STEP 1
Check that the shift lever is set in P.
STEP 2
Firmly depress the brake pedal.
STEP 3
The "ENGINE START STOP" switch indicator will turn green. If
the indicator does not turn green, the engine cannot be started.
STEP 4
Stopping the engine
■
Stop the vehicle.
STEP 1
Shift the shift lever to P.
STEP 2
Set the parking brake. (→P. 180)
STEP 3
Press the "ENGINE START STOP" switch.
STEP 4
Release the brake pedal and check that the indicator on the
STEP 5
"ENGINE START STOP" switch is off.
Press the "ENGINE START
STOP" switch.
The engine will crank until it
starts or for up to 30 seconds,
whichever is less.
Continue depressing the brake
pedal until the engine is com-
pletely started.
The engine can be started
from any mode.
CTH21AS005
2
167