Toyota 4runner 2010 Instruction Manual page 463

Operating HomeLink
Press the appropriate HomeLink
light should come on.
The HomeLink
a signal for up to 20 seconds as long as the button is pressed.
Erasing the entire HomeLink
Before programming
■
Install a new battery in the remote control transmitter.
●
The battery side of the remote control transmitter must be pointed away
●
from the HomeLink
®
®
compatible transceiver in your vehicle continues to send
®
®
button.
3-7. Other interior features
®
button. The HomeLink
memory (all three programs)
Press and hold the 2 outside but-
tons for 20 seconds until the indi-
cator light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
®
HomeLink
®
indicator
memory.
3
467