Toyota 4runner 2010 Instruction Manual page 581

5-2. Steps to take in an emergency
STEP 3
STEP 4
Stowing the flat/spare tire, jack and tools
STEP 1
Raise the tire.
STEP 2
Vehicles with kinetic dynamic suspension: Pull the tire toward
the rear of the vehicle when raising. After raising, visually
check that tire is not interfering with components.
Stow the tools and jack securely, and replace the cover.
STEP 3
586
Lower the vehicle.
CTH52AS019
Firmly tighten each wheel nut
two or three times in the order
shown in the illustration.
Tightening torque:
83 ft•lbf (110 N•m, 11.5 kgf•m)
CTH52AS029
Lay down the tire with the outer
side facing up, and install the
holding bracket.
CTH52AS031