Toyota 4runner 2010 Instruction Manual page 226

2-4. Using other driving systems
Shifting from L4L to H4L
■
Stop the vehicle completely.
STEP 1
Shift the shift lever to N.
STEP 2
STEP 3
The four-wheel drive control switch can be operated when
■
The "ENGINE START STOP" switch is in IGNITION ON mode.
When the four-wheel drive control switch is turned to L4L
■
VSC and TRAC (TRC) are automatically turned off.
If the center differential lock indicator flashes
■
Locking or unlocking of the center differential is not complete. Drive straight
ahead while accelerating or decelerating, or drive in reverse.
If the center differential lock indicator flashes and a buzzer sounds
■
Locking of the center differential is not complete. Stop the wheels from slip-
ping or spinning and, if the indicator still flashes, operate the four-wheel drive
control switch again.
If the low speed four-wheel drive indicator continues to flash
■
The transfer mode may not successfully change. Operate the four-wheel
drive control switch again.
228
Push the "UNLOCK" button and
turn the four-wheel drive control
switch to H4L.
Maintain this condition until the
low speed four-wheel drive indi-
cator goes off.
CTH24AS051