Toyota 4runner 2010 Instruction Manual page 592

Changing "ENGINE START STOP" switch modes and starting the
engine
Ensure that the shift lever is in P and depress the brake pedal.
STEP 1
STEP 2
To change "ENGINE START STOP" switch modes: Within 10
STEP 3
seconds of the buzzer sounding, release the brake pedal and
press the "ENGINE START STOP" switch. Modes can be
changed each time the switch is pressed. (→P. 168)
To start the engine: Press the "ENGINE START STOP" switch
within 10 seconds of the buzzer sounding, keeping the brake
pedal depressed.
In the event that the "ENGINE START STOP" switch cannot be oper-
ated, contact your Toyota dealer.
Stopping the engine
■
Shift the shift lever to P and press the "ENGINE START STOP" switch as
you normally do when stopping the engine.
Replacing the key battery
■
As the above procedure is a temporary measure, it is recommended that the
electronic key battery be replaced immediately when the battery is depleted.
(→P. 529)
5-2. Steps to take in an emergency
Touch the Toyota emblem side of
the electronic
"ENGINE START STOP" switch.
If any of the doors is opened or
closed while the key is being
touched to the switch, an alarm
will sound to indicate that the start
function cannot detect the key.
CTH52AS002
key to the
597
5