5-2. Steps to take in an emergency
If the tire pressure warning system is not functioning
■
The tire pressure warning system will be disabled in the following condi-
tions:
(When the condition becomes normal, the system will work properly.)
If tires not equipped with tire pressure warning valves and transmit-
●
ters are used
If the ID code on the tire pressure warning valves and transmitters is
●
not registered in the tire pressure warning computer
If the tire inflation pressure is 73 psi (500 kPa, 5.1 kgf/cm
●
higher
The tire pressure warning system may be disabled in the following condi-
tions:
(When the condition becomes normal, the system will work properly.)
If electronic devices or facilities using similar radio wave frequencies
●
are nearby
If a radio set at a similar frequency is in use in the vehicle
●
If a window tint that affects the radio wave signals is installed
●
If there is a lot of snow or ice on the vehicle, particularly around the
●
wheels or wheel housings
If non-genuine Toyota wheels are used (Even if you use Toyota
●
wheels, the tire pressure warning system may not work properly with
some types of tires.)
If tire chains are used
●
If the tire pressure warning light comes on after flashing frequently
■
for 1 minute
If the tire pressure warning light comes on after flashing frequently for 1
minute when the "ENGINE START STOP" switch (vehicles with a smart
key system) or the engine switch (vehicles without a smart key system)
is turned on, have it checked by your Toyota dealer.
Customization that can be configured at Toyota dealer
■
The vehicle speed linked seat belt reminder buzzer can be disabled.
(Customizable features →P. 638) However, Toyota recommends that the
seat belt reminder buzzer be operational to alert the driver and front passen-
ger when seat belts are not fastened.
574
2
or bar) or