Table of Contents
Advertisement
Operations
Pad Pressure Adjustment
The pad pressure is set at the factory for optimal
burnish performance in most conditions. If the pad
pressure needs to be adjusted, follow the procedure
outlined below.
NOTE: Pad pressure adjustments should only be
performed by a qualified technician.
1. Turn burnish switch off.
2. Remove back panel.
3. Adjust ball end to increase or decrease pad
pressure as shown in diagram.
Increase Pad
Pressure
26
Decrease Pad
Pressure
86408910 Lightning BDP 50-2000 W
Storage
1. Machine should be stored in a dry environment.
2. Store machine away from objects that may fall and
damage it.
3. Never store burnisher near an open flame or heat
producing device.
4. Make sure burnisher is cleaned properly by wiping
machine down with damp cloth before storing.
Never pressure wash machine.
Ne lavez pas la machine sous pression.
Operation on Inclines
When using the machine, go slowly on inclines.
Lors de l'utilisation de la machine, travaillez
lentement sur les surfaces inclinées ou glissantes.
Do not burnish on an incline.
N'utilisez pas le brunissoir sur une surface
inclinée.
The maximum rated climb and descent incline is 6°.
Advertisement
Table of Contents
