Table of Contents
Advertisement
Operations
Charger Settings
The On-Board battery charger settings need to be set for your battery type before charging. Failure to properly set
will result in battery damage. To determine your battery type, see battery label or contact your battery supplier.
To change charger settings:
1. Unplug the charger.
2. Peel back the corner of the display label.
3. Set the DIP switches, according to your battery pack, as shown below. If your battery pack type is not listed,
contact Kärcher North America.
86408910 Lightning BDP 50-2000 W
21
Advertisement
Table of Contents
