Windsor 10020430 Operating Instructions Manual page 19

1. Key Switch - Turns the machine on/off.
2. Handle Lever - When the lever is engaged the
machine will move forward. If the Burnish switch is
on, the pad will also start turning. If the burnish
head is tilted up into the pad change position, the
burnish motor will not engage.
3. Burnish Switch - Turns burnish function on/off.
The burnish motor will not engage unless the
burnish switch is on and the handle lever is
engaged. If the burnish head is tilted up into the
pad change position, the burnish motor will not
engage.
NOTE: The machine needs to be moving when the
burnish switch is turned on or off in order to keep
from burning the floor.
4. Reverse Switch - Hold down this switch while the
handle lever is engaged and the machine will move
in reverse. Once the reverse switch is released the
machine will start moving forward.
5. Traction Speed Control - Turn the knob clockwise
to increase speed. Turn the knob counter-
clockwise to decrease speed.
6. Hour Meter / Battery Discharge Indicator - The
LCD displays the number of burnishing hours. The
machine will only count hours while burnishing.
The row of LEDs display the charge level of the
battery pack. When all the yellow LEDs are lit, the
battery pack is fully charged. In order to protect the
battery pack, when the red LED is lit, the burnish
motor will stop and the machine should be
recharged.
7. Alarm LED - Displays trouble codes as a blink
pattern. In normal operation this LED will be off. If it
comes on, refer to the troubleshooting section.
86408910 Lightning BDP 50-2000 W
Operations
19