Installation; Mounting In The Rack - Panasonic WJ-HD100 Operating Instructions Manual

INSTALLATION

Warning
This installation should be made by qualified service personnel or system installers.
Cauton notes regarding installation
Places to avoid
• Direct exposure to sunlight or near a source of heat such as a radiator.
• Very dirty and dusty places. Places subject to strong vibrations.
• Near transformer, dimmer, video player, radio and monitor. These may cause humming noises, etc.
Caution notes regarding mounting
• Do not block the ventilation openings or slots in the cover to prevent the appliance from overheating.
• Always keep temperature in the rack within +45 °C (113 °F).
• Secure the rear of the appliance to the rack by using additional mounting brackets (procured locally), if the rack is subject
to vibration.

Mounting in the Rack

1. Remove the four rubber feet by removing the four
screws on the bottom of the unit.
2. Place the rack mounting brackets on both sides of the
unit and tighten with the six supplied screws (M3 x10).
Fix the rack mounting brackets
9
Remove 4 rubber feet
Six screws (Supplied)
3. Install the unit with the rack mounting brackets in the
rack by using four screws (not included).
Rack