Initialzing - Panasonic WJ-HD100 Operating Instructions Manual

Initializing
There are two initializing available; all contents on the disk
including picture information and setups, or only setups.
Initializing All Contents & Setups
Warning! The following are irrevocable procedures. We
strongly recommend that you copy important pictures
from the hard disk to CF cards before initializing.
ON
1 2 3 4 5 6
1. Press the [ STOP] [ESC] button to stop recording or
playback.
2. Turn off the power.
3. Set the MODE switch #1 through #4 as follows on the
rear panel.
#1: ON
#2: OFF
#3: OFF
#4: ON
4. Turn on the power.
The contents on the disk and setups are initialized.
NOW FORMATTING HDD
5. Turn off the power, and return the MODE switches to
the previous positions.
18
ON
OFF
MODE
Initializing Setups
SYSTEM INFORMATION
HDD HOUR METER
HDD CAPACITY
DEFAULT→
1. Open the SYSTEM INFORMATION window, then move
the cursor to DEFAULT.
2. Press the JogDial to move the cursor to SET.
3. Press the JogDial.
4. Select either YES or NO with the JogDial.
YES: Initializing the setups is enabled
5. Press the JogDial.
SET DONE appears on the monitor after initializing.
6. Press the [SETUP/ESC] button.
The cursor moves to DEFAULT.
7. Hold down the [SETUP/ESC] button for 2 seconds to
quit the setup.
1000H
27.95GB
SET→