Operating Alarm - Panasonic WJ-HD100 Operating Instructions Manual

Operating Alarm

Suspending Alarm Input
This may be convenient to be used during setup procedures or when you need not alarm recording. If this is set to ON, the
alarm input is ignored and the recorder performs as follows.
• The alarm event will be logged in the history.
• The recorder does not enter alarm recording
• The recorder does not sound buzzer
• The ALARM SUSPEND indicator lights.
1. Press the LCD button downward to display [Alarm Suspend] on the LCD.
2. Select either ON or OFF by
pressing the LCD button to
the left or right.
ON: Alarm input is suspend-
ed.
OFF: Suspension is reset.
Alarm History Search
Alarm history is listed in chronological order with event
number, date, time, availability of recorded picture, and the
activation source on the monitor.
ALARM RECALL 1 OF 10
NO DATE
99 JUN 9.00 00:00:00 * T
98 JUN 1.00 02:34:56
97 JUN 1.00 01:10:01 * V
96 MAY31.00 23:34:45
95 MAY30.00 02:00:20 * T
94 MAY14.00 05:30:31 * T
93 MAY 7.00 23:00:59
92 MAY 6.00 22:05:50
91 APR14.00 23:00:59 * T
90 APR14.00 16:06:34 * V
ALARM RECALL 10 OF 10
NO DATE
4 FEB20.00 00:00:00 * T
3 FEB11.00 02:34:56
2 JAN15.00 01:10:01 * V
1 JAN 1.00 23:34:45
PUSH JOG→ DATA CLEAR
T: Alarm terminal was activated
V: VMD was activated
Asterisk *: Corresponding alarm picture is recorded on
the disk
No asterisk: No picture is available.
38
TIMER HDD
ALARM
FULL
OPERATE SUSPEND
DAYLIGHT
SAVING LOCK
Lights while suspending the alarm.
TIME ALM
T
V
T
V
TIME ALM
T
V
1
MEMORY CARD
DISPLAY SELECT
LCD CONTRAST
• To browse history
1. Hold down the LCD button center for 2 seconds.
The monitor displays ALARM RECALL while the
highlighted line on the monitor is also displayed on
the LCD.
2. Rotate the JogDial to scroll up or down the list.
3. Hold down the LCD button center for 2 seconds to
go back to the previous status.
• To search for playback
1. Select the desired alarm event by rotating the
JogDial.
2. Press the [B PLAY] button to play back the record-
ed picture. The LED lights. The ALARM RECALL
disappears.
3. Press the [STOP] button to stop playback.
The ALARM RECALL appears on the monitor.
4. Hold down the LCD button center for 2 seconds to
quit alarm history search.
• To erase the stored history
1. Move the cursor to "PUSH JOG→DATA CLEAR",
then press the JogDial.
All alarm event records on the list are erased.
Note: You can access to the pictures recorded on
the disk by time & date search after the erasure.
Note: There may be cases that the displayed asterisk* on
the alarm history does not stand for the corresponding
recorded picture, because of overwriting. This happens
sometimes when the DISK END MODE is set to CON-
TINUE.
(downward)
SETU/ESC PUSH– PAUSE
DISPLAY SELECT /
STOP PLAY REC
PLAY MODE SELECT
ALARM SEARCH STEP REW/FF
LCD CONTRAST
/ /
Digital Disk Recorder WJ-HD
2
(left or right)
SET
/