Troubleshooting - Panasonic WJ-HD100 Operating Instructions Manual

TROUBLESHOOTING

Phenomenon
Different pictures are copied on the
CompactFlash card from ones dis-
played on the monitor
Setup menus supplied from the video
multiplexer can not be recorded
The recorded channel # deviates from
the original supplied from the video
multiplexer
VMD does not function
T & D or status display is pushed out of
the display range on the monitor
Playback picture darkens in the bottom
portion on the video monitor
Error message appears saying "TEM-
PERATURE ERROR SYSTEM
STOPPED"
42
Cause
The monitor receives the multiscreen-
out signal from the video multiplexer
The WJ-HD100 does not record non-
interlace video
This may happen when the video multi-
plexer is connected with CAMERA SW
OUT, and the field rate is set to 10 FPS
or faster
VMD does not perform while playing
back
This may happen depending on the
monitor
This may happen depending on the
monitor, WJ-HD100 records up to 234H
per a field
Ventilation is blocked
Cooling fan stops
What to do
Connect the video monitor directly with
the WJ-HD100
Set the field rate 7.5 FPS or slower
Stop playback
Adjust the scan size of the video moni-
tor
Remove obstacles placed near ventila-
tion openings and the fan
Contact your dealer for replacement of
the fan