Table of Contents
Advertisement
9
Radial brake calipers on
the axle adapter
136
28 lb/ft (38 Nm)
Fasten cable for wheel speed
sensor in bracket arrow.
z
Insert wheel speed sensor in
bore and fasten with screw 1.
Lay on brake caliper 1 on right
and install screws 2 with speci-
fied torque.
Radial brake calipers on
the axle adapter
28 lb/ft (38 Nm)
Remove adhesive tape from
wheel rim.
Press handbrake lever firmly
several times until resistance
point is felt.
Removing rear wheel
Raise motorcycle, preferably
with a BMW Motorrad rear-
wheel stand.
Mount rear-wheel stands
(
117).
Support the rear wheel, e.g.,
with a wooden block, so that
it cannot fall down after the
quick-release axle is removed.
Press brake caliper 1 against
brake disk 2
Brake pistons are pressed
back.
Advertisement
Table of Contents
