Dynamic Traction Control Dtc; Dtc - BMW 2013 S 1000R Rider's Manual

4
52
Press and hold button 1 until
ASC warning lamp 2 changes
its display behavior.
z
ASC warning lamp begins
to light up.
Release button 1 within two
seconds.
ASC warning lamp remains
on.
The ASC function is switched
off.
Switching the ASC
function on
Press and hold button 1 until
ASC warning lamp 2 changes
its display behavior.
ASC warning lamp goes
out; if self-diagnosis has
not been completed, it begins to
flash.
Release button 1 within two
seconds.
ASC warning lamp remains
off or continues to flash.
The ASC function is switched
on.
If the coding plug is not in-
stalled, the ignition can also be
switched off and then on again
as an alternative.
If ASC warning light
lights up after switching
ignition off and on and then
continuing driving at following
minimum speed, an ASC error
has occurred.
min 3 mph (min 5 km/h)
Dynamic Traction
Control DTC
with Dynamic Traction Control
OE

(DTC)

Switching the DTC
function off
Switch on ignition.
The DTC function can
also be deactivated while
driving.