Installing Rear Wheel - BMW 2013 S 1000R Rider's Manual

9
138
Roll rear wheel toward rear
out of swing arm while pulling
brake caliper carrier 1 toward
rear until rear-wheel rim can be
z
guided past it.
The chain sprocket and
the spacer sleeves on the
left and right are loosely inserted
in the wheel. When removing,
make sure that these parts are
not damaged or lost.

Installing rear wheel

Malfunctions may occur
during control interventions
by ABS or ASC/DTC if a wheel
other than the standard wheel is
installed.
Please see the information on
the effect of wheel sizes on the
ABS and ASC/DTC chassis con-
trol systems at the beginning of
this chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
Roll rear wheel on support into
swing arm until brake-caliper
support can be installed.
Mount brake caliper carrier 1 in
guide 2.
Make sure that the wheel
speed sensor 1 is not
damaged when rolling the rear
wheel into place.