Asc Error - BMW 2013 S 1000R Rider's Manual

ASC error

ASC warning lamp lights
up.
Possible cause:
The ASC control unit has
detected an error. It must be
noted that the ASC function is
not available at all or is restricted.
It remains possible to continue
riding. You should also take
account of the additional infor-
mation on situations that can
lead to an ASC fault (
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
DTC intervention
with Dynamic Traction Control
OE
(DTC)
DTC warning lamp flashes
rapidly.
The DTC control unit has
detected instability at the rear
wheel and has reduced the
torque. The warning lamp
flashes longer than the DTC
intervention lasts. This feature
continues to furnish the rider with
visual feedback confirming that
the system has initiated active
closed-loop intervention even
after the critical situation has
109). passed.
DTC self-diagnosis not
completed
with Dynamic Traction Control
OE
(DTC)
DTC warning lamp flashes
slowly.
Possible cause:
DTC self-diagnosis not
completed
The DTC function is not avail-
able, as the self-diagnosis
function has not been com-
pleted. (To check wheel sen-
sors, motorcycle must reach
a minimum speed with en-
gine running: min 3 mph (min
5 km/h))
Ride off slowly. It must be
noted that the DTC function
is not available until the self-
diagnosis has been completed.
DTC switched off
with Dynamic Traction Control
OE
(DTC)
DTC warning lamp lights
up.
3
33
z