Rear-Wheel Stand - BMW 2013 S 1000R Rider's Manual

6 Spare fuses with gripper
Miniature fuses, 4 A, 7.5 A
and 10 A
Puller for removing fuses
Replacement fuses
7 Plastic attachment for
socket wrench
with Dynamic Damping
OE
Control
Adjusting spring preload
on front wheel (
8 TORX wrench, T25
Removing and installing
body panels
Removing rider`s seat
( 61).

Rear-wheel stand

Mounting rear-wheel
stands
The motorcycle can tip
away to the side and fall
over.
Secure motorcycle against tip-
ping away to the side, prefer-
ably with the help of a second
person.
Make sure ground is level and
firm and park motorcycle.
78).
Use basic stand with mount-
ing pieces. The basic stand
and its accessories are avail-
able through your authorized
BMW Motorrad retailer.
Install mounting pins 1 on left
and right in rear wheel swing
arm, tightening to specified
torque.
Adapter on rear wheel
swinging arm
15 lb/ft (20 Nm)
9
117
z