Table of Contents
Advertisement
Press and hold button 1 un-
til first DTC warning lamp 2
and then ABS warning lamp 3
changes its display behavior.
The DTC setting remains un-
changed.
ABS warning lamp lights
up.
Release button 1 within two
seconds.
ABS warning lamp remains
on.
The ABS function is switched
off.
Switching the ABS
function on
Press and hold button 1 until
ABS warning lamp 2 display
changes.
ABS warning lamp goes
out; if self-diagnosis has
not been completed, it begins to
flash.
Release button 1 within two
seconds.
ABS warning lamp remains
off or continues to flash.
The ABS function is switched
on.
If the coding plug is not in-
stalled, the ignition can also be
switched off and then on again
as an alternative.
If ABS warning light
lights up after switching
ignition off and on and then
continuing driving at following
minimum speed, an ABS error
has occurred.
min 3 mph (min 5 km/h)
BMW Motorrad ASC
Switching the ASC
function off
Switch on ignition.
The ASC function can
also be deactivated while
driving.
4
51
z
Advertisement
Table of Contents
