Descriptions And Symbols For Documents And Paper; Width" And "Length; Paper Orientation - Konica Minolta BIZHUB C250 Operations

Introduction
1.5

Descriptions and symbols for documents and paper

The use of words and symbols in this manual are explained below.

"Width" and "Length"

Whenever paper dimensions are mentioned
in this manual, the first value always refers to
the width of the paper (shown as "Y" in the
illustration) and the second to the length
(shown as "X").

Paper orientation

Lengthwise (w)
If the width (Y) of the paper is shorter than the
length (X), the paper has a vertical or portrait
orientation, indicated by w.
Crosswise (v)
If the width (Y) of the paper is longer than the
length (X), the paper has a horizontal or
landscape orientation, indicated by v.
bizhub C250 (Phase3)
1
1-23