Avaya 4600 Series Installation Manual page 58

Local Administrative Options
3. Enter the Gatekeeper IP Address (H.323) or Registration Server IP Address (SIP)
followed by the # button.
The following message displays:
CallSvPort=nnnnn
New=_
where nnnnn is the value of the Management Complex (media server/gatekeeper)
transport-layer port number, a value between 0 and 65535.
4. Enter the appropriate value for the Port Number followed by the # button.
The following message displays:
Router=nnn.nnn.nnn.nnn
New=_
where nnn.nnn.nnn.nnn is the value of the gateway/router IP Address.
5. Enter the Gateway router IP Address followed by the # button.
The following message displays:
Mask=nnn.nnn.nnn.nnn
New=_
where nnn.nnn.nnn.nnn is the value of the IP netmask.
6. Enter the IP netmask followed by the # button.
The following message displays:
FileSv=nnn.nnn.nnn.nnn
New=_
where nnn.nnn.nnn.nnn is the value of the TFTP server IP Address.
7. Enter the TFTP/HTTP Server IP Address followed by the # button.
The following text displays left-justified at the top of the display:
802.1Q=status
*=change #=OK
where status corresponds to the current value of NVL2Q (0=auto; 1=on; 2=off).
58 4600 Series IP Telephone Installation Guide
or nnn.nnn.nnn.nnn
Router=_
or nnn.nnn.nnn.nnn
Mask=_
or nnn.nnn.nnn.nnn
FileSv=_